Dimensional Measurement - Page 737

Manufacturer: Brand new Brand: Brand new

Features: Accurate to .001" per inch Large LCD display Quickly converts between inches, metric and fractions Heavy duty polycarbonate frame that is self standing Includes 2 hardened stainless steel points (flat and pointed) Measuring range: depth to 0" and height to 3.1" Absolute zero function at any depth or height to allow determining relative distance Hold function so you never forget a measurement Power saving that shuts off after 5 minutes Battery: 3 volt CR2032 with approximate life of 1 year Comes with extra battery

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-240-001-1

Range: 0-1" | Resolution: 0.0001" | Part Number: 52-240-001-1 Fowler 52-240 series Vernier-scale micrometers have a choice of measuring range and a 0.256" diameter flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.0001" graduation intervals and 0.0001" accuracy for precise and accurate readings. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers for accurate measurements. The positive locking lever on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. Friction thimble with ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare, providing long life, and microfine graduations help ensure accurate readings. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. Specifications Display type Vernier scale Anvil/spindle style Flat Measuring range 0-1" Graduation interval 0.0001" Accuracy 0.0001" Thimble style Friction or ratchet Anvil/spindle diameter 0.256" Flatness 0.0003" Parallelism 0.00005" on 0 to 1" micrometers   Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read ...

Manufacturer: Wilmar Performance Tool Brand: Performance Tool Model: M196

Patented torque adjusting lock/unlock collar. High grade spring steel torque mechanism. Heavy duty case. Instruction manual included. Size: 1/4'' Drive; 25-250 in/lbs. (3.61-29.03 N/M).

Manufacturer: Delmhorst Brand: Delmhorst Model: 1320/24

Contact pins used on 42-EB 42-EB/4.5 package of 24 5/16-inch penetration.

Manufacturer: MEDA - SUPERIOR IMPORT Brand: Meda - Superior Import

For inspection and layout work. Each gage is marked with its radius size and has five measuring surfaces for concave and convex radii. Satin chrome finish. Each set comes in fitted wallet.

Manufacturer: TechnologyLK Brand: TechnologyLK

Push-Pull capability. Range is from 0-35 Pounds Door Pressure Gauge Push-Pull instrument design specifically to measure force. This instrument is capable of measuring the entire range of forces found in servicing interior and exterior doors. OPERATING INSTRUCTIONS Set the top (small) o-ring located on the plunger rod on zero, down against the instrument's flange; or set the o-ring on the desired force. Holding the instrument firmly, press slowly against the door at a point approximately handle-high, and 30 inches away from the door's hinges. Read the amount of force required to open the door on the plunger scale closest to the bottom of the small o-ring. MEET ADA REQUIREMENTS The Americans with Disabilities Act requires that both interior and exterior doors of a building be handicapped accessible. Door Opening Force (4.1311 ADA AG). Exterior hinged doors: (Reserved) Interior hinged doors: 5 lbs (22.2N) Sliding or folding doors: 5 lbs (22.2N) Automatic/Power Assisted Doors: (4.13.12) Such doors shall not open to back check faster than 3 seconds and shall require no more than 15 lbs (66.6N) to stop door movement. If a power assisted door is used, its door-opening force shall comply with 4.13.11 and its closing shall conform to the requirements in ANSI A156.19-1984.

Manufacturer: BETA UTENSILI S.P.A. Brand: Beta Tools

Beta Utensili is a leading company in the production and sales of professional hand tools. The Ciceri family began producing tools in Northern Italy in the 1880s. Today, family owned Beta, or Beta Utensili is known for its direct involvement in Grand Prix racing, a relationship that dates back to the early 1970s. Research, development and quality. While nothing is perfect, we’re practicing. Accuracy, precision, rigor, quality, courage, style, consistency and innovation. To mould an idea, encourage it to its final outcome and after that better it still, Beta works daily, in close contact with end users, researching materials, design and constant improvement. Scrupulous control on each tool ensures its invariable quality.

Manufacturer: BETA UTENSILI S.P.A. Brand: Beta Tools

Beta Utensili is a leading company in the production and sales of professional hand tools. The Ciceri family began producing tools in Northern Italy in the 1880s. Today, family owned Beta, or Beta Utensili is known for its direct involvement in Grand Prix racing, a relationship that dates back to the early 1970s. Research, development and quality. While nothing is perfect, we’re practicing. Accuracy, precision, rigor, quality, courage, style, consistency and innovation. To mould an idea, encourage it to its final outcome and after that better it still, Beta works daily, in close contact with end users, researching materials, design and constant improvement. Scrupulous control on each tool ensures its invariable quality.

Manufacturer: Bagby Gage Stick Brand: Bagby Gage Stick

Gage poles to measure depths

Manufacturer: BOSTITCH Brand: BOSTITCH Model: 33-001

The item is BOSTITCH 33-001 Bi-Material Tape with Blade Armour, 1-1/4-Inch by 25-Feet . Used for Power Tool Accessories, Blades - Other. The product is manufactured in United States.