|
|
-
4.3 of 5.0 with 17 Reviews
SALE PRICE: $102.40
Manufacturer: INSIZE
Brand: INSIZE
Model: 7391-T6
Manufacturer: INSIZE
Brand: INSIZE
Model: 7391-T6
BALL POINT, .138" dia, pair.
-
4.3 of 5.0 with 5 Reviews
SALE PRICE: $102.94 1% OFF
Manufacturer: Generic
Brand: Generic
Manufacturer: Generic
Brand: Generic
-
4.3 of 5.0 with 35 Reviews
SALE PRICE: $103.79
Manufacturer: L.S. Starrett
Brand: Starrett
Manufacturer: L.S. Starrett
Brand: Starrett
End Measuring Rod is used for checking and setting micrometers of 2 capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand. This listing is for each. Technical Specification Item End Measuring Rod w/Grip Dia. 9.5mm Range 275mm For Use With 300mm Micrometers, Includes Insulating Rubber Handle
-
4.3 of 5.0 with 5 Reviews
SALE PRICE: $104.01
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Fowler Steel Square 12in 52-432-012-0
-
4.3 of 5.0 with 16 Reviews
SALE PRICE: $105.00 1% OFF
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.
-
4.3 of 5.0 with 22 Reviews
SALE PRICE: $105.30 3% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2506S
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2506S
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
4.3 of 5.0 with 46 Reviews
SALE PRICE: $106.00
Manufacturer: Vermont Gage
Brand: Vermont Gage
Manufacturer: Vermont Gage
Brand: Vermont Gage
Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.
-
4.3 of 5.0 with 20 Reviews
SALE PRICE: $107.14 21% OFF
Manufacturer: Fred V Fowler
Brand: Fred V Fowler
Manufacturer: Fred V Fowler
Brand: Fred V Fowler
Please note that the case used with this model comes with an open slot for 4 In which does not come with this model.Direct inch/metric conversion presettable to ring gage or setting master.Graduation: .0005"Range: 2"-6"Fast checking of bores size, ovality, taper, etc.Lightweight ABS gage shroud for extra protection.Tungsten carbide contact points.Thermally insulated for extra stability.2-point measuring with 3-point centering.Fred V Fowler 72-646-300 2 In - 6 In Cylinder Bore Gage
-
4.3 of 5.0 with 21 Reviews
SALE PRICE: $108.00
Manufacturer: Linsen Tool Co.,LTD
Brand: Linsen
Manufacturer: Linsen Tool Co.,LTD
Brand: Linsen
Each set of M26 x 1 thread ring gage 100% calibrated with quality assurance in our factory. If clients need long form calibration certificate, we can send to professional third party testing lab ISO17025 accredited to get. it need USD35 extra fee per set.each set including GO NOGO.We will send out goods by DHL, Fedex or UPS. Clients can expect goods in quick time. As too many items in stock, we haven't take pictures one by one, the picture showed just for reference.
-
4.3 of 5.0 with 7 Reviews
SALE PRICE: $109.00 1% OFF
Manufacturer: HFS
Brand: HFS
Manufacturer: HFS
Brand: HFS
|
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing. Specification: Measuring range (metric/imperial): 1.2-200mm, 0.06-8inch Operating principle: ULTROSONIC Materials measured: any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials Sound velocity: 500-9000m/s Lower limit steel pipes: 15x2.0mm, 20x3.0mm determined by the transducer Calibration block: included Resolution: 0.1mm Accuracy: ± (0.5%n+0.1) Power supply: 4x1.5V AA (UM-3) battery Battery indicator: low battery indicator Operating conditions:0-+45°c(32°F-104°F),?90%RH Dimensions: 160x68x32mm Weight: 208g (not including battery) Optional Accessories: 1)6M?6mm thin Material probe: Measuring range (steel): 1.0 50.0mm Operating temperature: -10~+60°c 2 )5M?12high temperature probe: Measuring range (steel): 1.0~225.0mm (normal temperature) Measuring range (steel): 4.0~100.0mm (high temperature) Operating temperature: -10~+300°c
|
|