Dimensional Measurement - Page 759

Manufacturer: INSIZE Brand: INSIZE Model: 2112-25E

Electronic indicator, 1"/25.4mm, resolution 0005" 0/01mm.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-570-010-0

The Fowler 52-570-010 back-plunger style universal dial indicator has a 1-1/2" diameter continuous dial, a 0.100" measuring range, and 0.001" graduations, and is designed to measure surface variations in fractions of an inch. The white face has a contrasting hand to make measurements easy to read. The 0-100 continuous dial has a total measuring range of 0.100" with 0.001" graduations. Jeweled bearings provide accuracy and long life. Attachments provide a range of mounting options. The set includes a dial indicator, G clamp, tool post base and vertical rod, swinging arm, ball anvil, 1/2" anvil, thumb clamp, 11/32" standard anvil, and fitted storage case. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. SpecificationsDial face type and diameter 1-1/2" diameter horizontal face Dial type and reading Continuous 0-100 dial Measuring range 0.100" range Graduations 0.001" graduations Bearings Jeweled Anvils Ball, 1/2", and 11/32" standardDial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicator...

Manufacturer: Moore and Wright Brand: Moore & Wright Model: MEB-MW200-SET2I

Moore and Wright History - Founded in 1906 by innovative young engineer Frank Moore, Moore & Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineers tools.

Manufacturer: YPF

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description metal casing & handle ,compact or firm structure, convenient & stable operation Measurement for the thickness of jewelry, leather, metal film, paper, rubber, fabric, and various metal panel, glass sheet etc. Technical Datas Resolution:0.001 mm /0.00005″ Range: 0 ~ 12.7mm / .5 " Power Supply: 1.5V silver oxide batteries (SR44)(Not including) Operating temperature: 0 ~ 40 ℃ Storage Temperature: -20 ~ 70 ℃ Relative Humidity: ≤80% NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe

MB216/MM-1 1"IND &;MIGHTY MG

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2928SB Color: Yellow

The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face. The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use. The grand gear uses stainless steel that is resistant to wear and deformation. Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.

Manufacturer: Start International Brand: START International

PEAK measuring loupe combination set. Set included 7X magnification Magnifier and five scales TSPS02, TSPS03, TSPS05, TSPS08, and TSPS12. Magnifier and scales are contained in a plastic box as a set.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2050SB-11 Color: Yellow

The dial indicators are Mitutoyo’s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-517T Color: Yellow

The Mitutoyo 513 series Pocket type dial test indicator has a yellow face, a 4mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (1mm, 2mm, and 3mm), two stems (4mm and 8mm diameter), a knurled clamp ring, a swivel clamp, a 100mm metric holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of th...