Dimensional Measurement - Page 761

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus, 0.3 mm carbide ball, stepped carbide shaft, 3.0 mm diameter x 5.0 mm long stainless steel base, 19.0 mm overall stylus length. Major shaft diameter is 1.0 mm. Intermediate shaft diameter is 0.50 mm. Minor shaft diameter is 0.20 mm. Stylus weight is 0.34 gram.

Manufacturer: Starrett Brand: Starrett Model: 387-12

These straight edges are thinner than our No. 385 Series (3/32" or 2.4mm) making them easier for draftsmen to use. Available in lengths up to 72" long. They have an attractive nickel plated finish, are beveled on one edge, and have a convenient hang-hole on one end.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-224-103-0

Fowler 52-224-103-0 inch digit micrometer set has a 0 to 3" measuring range and a flat anvil/spindle pair with a 0.256" diameter measuring face for general purpose measuring. The digit display has 0.001" graduation intervals and the secondary vernier scale has 0.0001" graduation intervals and an overall accuracy of 0.00016" (0-1” unit) for precise readings. Microfine graduations on satin chrome finish provide clear readings, and the positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers to provide accurate measurements. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The grey baked-enamel frame provides durability and is heat-insulated to reduce temperature-related expansion or contraction providing for accurate measurements. The set includes 0 to 1", 1 to 2" and 2 to 3”, 1" and 2" standards, a spanner wrench, and a fitted case. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically u...

Manufacturer: Mahr Brand: Mahr Federal Model: 4307200

Mahr Federal 800 SG MarTest 4307200, 0.01mm x ±0.4mmStandard Test Indicator, 0-40-0, 1.5" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage LCD IP54-rated outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement. The micrometer’s electronic microprocessor can set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer’s knurled ratchet thimble mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: starmeter instruments co.,ltd Brand: Generic Model: CM8802FN+

Specification : Rang:0-1250um, 0-50mils Accuracy:+-(2+3%H), H is standard thickness Operation Temperature:-10C-60C Storage Temperature:0-40C Features: Two colors display: Black letter on white background and Green letter on black background . Automatically recognizes the material and takes a measurement. Automatic ON/OFF switching. ZERO set feature for non-standard surfaces. RESET to factory settings feature when no zero reference is available. Flip LCD Display Display Max Min Average at the same time Mils/Microns selectable. Pocket-sized , one hand operation. Supplied with a set of plastic test shims. Packing: carrying case substrate blocks (steel x 1pc, Aluminumx1pc) Calibration foils x 1set English manual

Manufacturer: INSIZE Brand: INSIZE Model: 2341-2E1

Dial depth gage, 0-12", dial indicator graduation 001".

Manufacturer: Starrett Brand: Starrett Model: 25-341J Color: White

These indicators have a shockless, hardened steel gear train and jewel bearings, except where noted. They are furnished with a lug-on-center back. Antimagnetic mechanism is optional. Special nonshock mechanism is available.

Manufacturer: L.S. Starrett Brand: L.S. Starrett

End Measuring Rod is used for checking and setting micrometers of 2 capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand. This listing is for each. Technical Specification Item End Measuring Rod w/Grip Dia. 11mm Range 500mm For Use With 525mm Micrometers, Includes Insulating Rubber Handle

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's NPTF Tapered Pipe Plug Gages are used to check tapered internal pipe threads. Perfect for inspecting standard pipe and pipe fittings.