Dimensional Measurement - Page 765

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. •Model AR •Type: A (2 round buttons top and bottom) •Frame No. 10 •Range: 5 1/4 - 6 Model No. 11-2010, Flexbar Snap Gage

Manufacturer: iGaging Brand: iGaging Model: 36-LM100

Igaging Super high precision measuring microscope illuminated and distortion free. Features: distortion free. Extreme high resolution. 20x (10x Objective and 10x eyepiece) Lighted by Super bright 3 LEDs. Can be used in total darkness! reticle precision: 0.0005"/0.01mm max measuring: 0.04"/1.2mm. Reticle has fine 90 degree crosshairs in center. Adjustable focal point for 2-1/2 inch vertical movement flexible rubber eyepiece. Stand included.

Manufacturer: Tlegend Instrument® Brand: Tlegend Instrument Model: 203-13-000

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description Deep throat frame for measuring thickness of sheet metal, paper and sheet plastic. Carbide measuring faces. Spray paint gauge, ratchet force, with locking device Measuring surface of hard alloy, bow frame type, and special products of the special products A locking clamp, it can be used for absolute measurement and comparison measurement NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Starrett Brand: Starrett Model: 436.1MRL-50

The Starrett 436.1 series outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped steel measuring faces for accuracy. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: COLE-PARMER Brand: Fowler

Micrometer sets are highly accurate and include case, standards, and adjustment wrenches. Ratchet deisgn; carbide tipped measuring faces; positive lever locking; anvil and spindle hardened and precision ground.

Manufacturer: INSIZE Brand: INSIZE Model: 3238-1

Caliper Type micrometer, 0-1", graduation 001".

Manufacturer: Fowler Brand: Fowler

.312" Holemike XT Setting Ring

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: TM8812

Features: Wide measuring range: 1.2 to 200mm/0.06 to 8 inch High accuracy of 0.5%n+0.1 High resolution of 0.1mm Low battery indication Capable of measuring any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials Specifications: Model: TM8812 Measuring range (metric/imperial): 1.2 to 200mm/0.06 to 8inch Operating principle: ULTROSONIC Materials measured: Any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials Sound velocity: 500 to 9000m/s Lower limit steel pipes: 15(D)*2.0mm, 20(D)*3.0mm determined by the transducer Calibration block: Included Resolution: 0.1mm Accuracy: ¡À(0.5%n+0.1) Power supply: 4*1.5V AA(UM-4)battery (not included) Battery indicator: Low battery indicator Operating conditions: 0 to +45 Centigrade (32 to 104 Fahrenheit), =

Manufacturer: G.A.L. Gage Brand: G.A.L. Gage Model: 297-0001

Measures internal alignment. Stainless steel construction. Slim design.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 133-143

The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in metric units for taking precise inside dimension (ID) measurements of the inside of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.