|
|
-
4.3 of 5.0 with 35 Reviews
SALE PRICE: $684.00 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
The MTT-10-300-L Dial Thickness Gauge for Leather with 300 mm Jaw Depth is a digital dial thickness gauge designed for the accurate thickness measurement of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. It is offered with two different jaw depths providing clearance to measure wide samples. The combination of feeler diameter and load weight generate a specific "pressure" as required by many standardized test standard necessary in order to get reliable and repeatable measurements such as fabric, felt, textiles and similar compressible materials. The instrument does not meet the DIN, EN and ISO standards. The feeler shape and the pressure are corresponding to DIN EN ISO 5084 standards. This low-cost thickness gauge is suitable for quick comparison measurements.
-
4.3 of 5.0 with 14 Reviews
SALE PRICE: $688.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-912
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-912
Dial Caliper Gauge, External Measurement Type, Ball Jaw, White Face, 0-50mm Range, +/-0.05mm Accuracy, 0.05 mm Resolution.
-
4.3 of 5.0 with 43 Reviews
SALE PRICE: $694.80
Manufacturer: INSIZE
Brand: INSIZE
Model: 3227-E35
Manufacturer: INSIZE
Brand: INSIZE
Model: 3227-E35
Three points internal micrometer, 3-3.5", graduation 0002".
-
4.3 of 5.0 with 48 Reviews
SALE PRICE: $695.00 1% OFF
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: N1-E
Manufacturer: DeFelsko Corporation
Brand: DeFelsko
Model: N1-E
|
Defelsko PosiTector 6000 standard electronic coating thickness gage. Solvent, acid, oil, water and dust resistant - weatherproof. Wear-resistant probe tip. Shock-absorbing, protective rubber holster with belt clip. Certificate of calibration showing traceability to nist included. Built-in temperature compensation ensures measurement accuracy. Hi-Res mode increases displayed resolution for use on applications that require greater precision. Conforms to national and international standards including ISO and ASTM. PosiTector body universally accepts all PosiTector series. Probes easily converting from a coating thickness gage to a surface profile gage, dew point meter or ultrasonic wall thickness gage Multiple calibration adjustment options including 1 point, 2 point, known thickness, average zero. Selectable display languages. High contrast backlit display for bright or dark environments. Flip display enables right-side-up viewing. Uses alkaline or rechargeable batteries (built-in charger). Continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring Screen capture - record and save screen images into memory for record keeping and review. High/low alarm audibly and visibly alerts when measurements exceed user-specified limits. FAST mode - faster measurement speed for quick inspection USB port for fast, simple connection to a PC and to supply continuous power. USB cable included PosiSoft USB drive - stored readings and graphs can be accessed using universal PC/Mac web browsers or file explorers. No software required. Every stored measurement is date and time stamped. Software updates via internet keep your gage current.
-
4.3 of 5.0 with 23 Reviews
SALE PRICE: $705.42 12% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 514-103
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 514-103
|
The Mitutoyo 514-103 vernier height gauge has a measurement range of 0†- 12"/0 - 300 mm, and is graduated in both inches and metric to 0.001â€/0.02 mm, with + or - 0.002â€/0.04 mm of accuracy. The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for secure fastening. The grip-base helps hold the unit in position by hand. An adjustable beam with a ring-type lock nut supports repositioning of the zero reference point for manual change of the base position. The slider and beam are made of hardened stainless steel, with a glare-free satin chrome finish that helps resist rust. The height gauge weighs 6.83 lbs/3.1 kg. A vernier scale provides precise measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.3 of 5.0 with 23 Reviews
SALE PRICE: $715.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-550
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-550
|
The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...
-
4.3 of 5.0 with 28 Reviews
SALE PRICE: $773.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 685-3Z
Manufacturer: Starrett
Brand: Starrett
Model: 685-3Z
These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.
-
4.3 of 5.0 with 18 Reviews
SALE PRICE: $779.49
Manufacturer: MEDA - SUPERIOR IMPORT
Brand: Meda - Superior Import
Manufacturer: MEDA - SUPERIOR IMPORT
Brand: Meda - Superior Import
• Carbide measuring faces • Laser engraved graduations • Thermal insulator on each rod • Each rod marked with length • Laser engraved grads. • Carbide measuring faces • Chrome-plated
-
4.3 of 5.0 with 33 Reviews
SALE PRICE: $783.30 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 1150-600E
Manufacturer: INSIZE
Brand: INSIZE
Model: 1150-600E
Electronic Height gage, 0-24"/0-600mm.
-
4.3 of 5.0 with 32 Reviews
SALE PRICE: $849.48
Manufacturer: JAIN SCIENTIFIC SUPPLIERS
Brand: JAINCO
Model: 1286
Manufacturer: JAIN SCIENTIFIC SUPPLIERS
Brand: JAINCO
Model: 1286
SENIOR ROTARY MICROTOME: (Spencer 820 Type) Latest Model, with one razor 120 mm and honing stone. Feed range 1-50 micron in steps of one micron with automatic feed release device. Complete in box with three object holders and raxine cover. A premium product by JAINCOLAB. India.
|
|