|
|
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $42.99
Manufacturer: Guilin GemRed Sensor Technology Co., Ltd
Brand: Gemred
Manufacturer: Guilin GemRed Sensor Technology Co., Ltd
Brand: Gemred
GemRed 360 Digital Protractor Angle Gauge FeatureWith absolute level sensor, no need to calibrate by your selfWith backlight, easy to readSetup of precise machinesDisplay always reads upright, no matter which way it is turnedLow battery indicatorTechnical dataItem No.: 82413-00BMeasuring range: 4*90 degreeWorking temperature: 0 degree ~ +50 degree IP Grade: IP65Magnetcs: YesBattery: 2*1.5V AAAlkaline battery(Included)Battery life: More than 100 hours in continuous using
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.10
Manufacturer: SRA Measurement
Brand: Machine DRO
Model: ME-VT150
Manufacturer: SRA Measurement
Brand: Machine DRO
Model: ME-VT150
The scale is supplied with - slotted mounting brackets that clamp to each end of the scale. These can easily be removed allowing the scale to be cut to any length. Also supplied is a bracket for the rear of the reading head, attached by two M3 screws which are supplied.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.15
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 950-233
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 950-233
|
The Mitutoyo 950-233 inside spring caliper performs precise inside measurements up to 8"/200 mm, for applications requiring high levels of accuracy, especially in scientific research and in industries where parts must fit exactly. This caliper has fully rounded end points for accurate contact with workpieces and is made of high carbon steel with a brushed, natural steel finish. The 950-233 takes inside measurements in both inch and metric units. Inside depth is 11.25 inches. Range maximum is 8"/200 mm. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices. Mitutoyo manufactures precisio...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.15
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 950-213
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 950-213
|
The Mitutoyo 950-213 spring divider has an 8"/200mm maximum measuring distance for use in layout and in transferring measurements. It has hardened and tempered steel joints, spring, washers and divider points for durability. The spring divider has a knurled nut for adjusting divider point width, and is suitable for applications such as scribing an arc in layout for machined parts.Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.15
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 950-233
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 950-233
|
The Mitutoyo 950-233 inside spring caliper performs precise inside measurements up to 8"/200 mm, for applications requiring high levels of accuracy, especially in scientific research and in industries where parts must fit exactly. This caliper has fully rounded end points for accurate contact with workpieces and is made of high carbon steel with a brushed, natural steel finish. The 950-233 takes inside measurements in both inch and metric units. Inside depth is 11.25 inches. Range maximum is 8"/200 mm. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices. Mitutoyo manufactures precisio...
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $43.34 20% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
|
The Brown & Sharpe ball-shaped, carbide contact point has an M1.4x0.3 thread size, and is designed for use with Bestest series dial test indicators. Carbide contact points are resistant to wear and magnetic fields.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.74
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
Magnetic Bases, Stands and HoldersUniversal Snug, Features 1/4, 5/16, 3/8 In. Spindle Hole Dia., 3/32 to 1/4 In. Dia. Gripping Holes
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.74 48% OFF
Manufacturer: Precision Brand
Brand: Precision Brand
Manufacturer: Precision Brand
Brand: Precision Brand
Precision Brand Feeler Gage is used in manufacturing and maintenance operations wherever setting close spacing or checking extremely tight tolerances is required.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $43.90
Manufacturer: SRA Measurement
Brand: Machine DRO
Model: ME-PLUN-20
Manufacturer: SRA Measurement
Brand: Machine DRO
Model: ME-PLUN-20
There is also an external data output interface via data cable (not supplied). The indicator has a mounting lug with two 6mm diameter fixing holes. One in the front and the other in the side of the lug. On the under side is a thumb screw to lock the indicator. A mounting stem is also supplied which fits into the lug to provide another mounting option. Key Specifications Measuring range - 20mm (13/16) Plunger force - 1.8N Overall length - 100mm (3 15/16") Resolution - 0.01mm (0.0005") Battery - 1.55V SR44 Working Temperature - 0 ~ +40C
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $44.11 12% OFF
Manufacturer: Calculated Industries
Brand: Calculated Industries
Model: 7408
Manufacturer: Calculated Industries
Brand: Calculated Industries
Model: 7408
|
Perfect for pro and hobbyist woodworkers, cabinet makers, metal crafters, mechanics, reloaders and workshop DIYs.The AccuMaster's precision ground measuring faces will give you precise, reliable outside, inside, depth and step measurements. Its hardened stainless steel ruler and jaws are designed to measure up to your workshop demands.EASY TO SEE AND USE! - Extra large LCD display featuring the largest sized main digits (over 5/8" tall) drastically improves visibility and usability in shop environments. No more small dial faces or hard to read Vernier scales.PRACTICAL 1/64" FRACTIONS - most woodworkers want precision and they want it in the familiar format of inches and fractions, but they also need it to be in a usable format -- it's not helpful to see 53/128" if your tools (and your eyes) only read to 64ths! AccuMaster solves this and also gives you decimal inches and millimeters if the job requires.SMOOTH AND EASY OPERATION - unlike many in this price range, the AccuMaster glides smoothly along the stainless steel ruler as the slip-resistant thumb roller allows precise stops for the most accurate measurements. The clamp screw lets you lock the slider at any position desired. The Mode key toggles between Inch-Fractions, Decimal Inch and MMs. The "alternate-zero" lets you reset to zero at any point for relative measurements. On/Off button and auto-shut-off ensures long battery life.SPECIFICATIONS -- Accuracy 0.001" (0.02mm); LCD Display Resolution 0.0005" (0.01mm) 1/64". Range 0-6". Comes with CR-2032 battery, sturdy foam-lined case and a 1-year Warranty.Why put up with less-featured, hard to read digital calipers in your shop?Click Add to Cart now and get the new AccuMASTER today!
|
|