Dimensional Measurement - Page 84

Manufacturer: CEN-TECH Brand: CenTech

Highly accurate micrometers, essential for all precise measurements. With this versatile three piece set, you'll never be lacking the correct SAE size. Maximum throat depth: 15/16", 1-1/4" and 1-5/8" Weight: 2.60 lbs.

Manufacturer: CEN-TECH Brand: CenTech

Highly accurate micrometers, essential for all precise measurements. With this versatile three piece set, you'll never be lacking the correct SAE size. Maximum throat depth: 15/16", 1-1/4" and 1-5/8" Weight: 2.60 lbs.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-603-303-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: ezMachineTools Brand: ezMachineTools

This M1 Minus type plug pin gage set contains 190 pieces. They are of size 0.061 inch to 0.250 inch. The tolerance is -0.002 inch.

Manufacturer: YINGNEW Brand: YINGNEW Model: SW40 Color: Green and Black

This laser measure with a hard plastic exterior and plastic-coated buttons. There is a standard tripod connector on the underside and a spirit level on one side to make it easy to tell that you're holding it level.Measure in metric or US units which makes it very convenient,you can cycle through meters/inches/feet. It has a large backlit LCD display which makes it easy to use in darker conditions (the backlight can be turned on and off as needed).It can do a variety of other calculations: Area measurement Volume measurement Pythagorean measurementDistance Measurement Continuous Measurement Take it home now and will help to save a lot of time when measuring square footage.Specification: √Measuring range:0.05-40m(0.16 to 132ft) √Accuracy:±1mm(0.04 inches) √Self calibration:Yes √Laser-type:2.635nm.﹤1 mW √Storage record number:30 units √Laser maximum output

Manufacturer: Starrett Brand: Starrett Model: 159M

Starrett screw pitch gauge is among the most useful tools in any mechanics tool box. They quickly determine the pitch of various threads. This gauge consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch, marked on each leaf.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 150-189

The Mitutoyo 148 series middle-size micrometer head has a vernier scale in metric units for taking precise measurements to 25mm. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm, 0.001mm, or 0.0001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Kimberly-Clark Professional Brand: Jackson Safety Model: 14783

Models available jumbo size for scribing circles up to 80" diameter. Folding type design - three smallest models will fit conveniently into a shirt pocket. Sturdy friction joints maintain rigidity and accuracy, and are made from lightweight, rustproof aluminum for long wear. Soapstone crayon is included. The scribe holder will accept round, square or flat soap stone crayon, pencil or steel point scribe.

Manufacturer: ezMachineTools Brand: ezMachineTools

This precision 0-60º angle block has dimension of 4"x1-13/16"x1-13/16, angle of vee 90º, HCR 50-55, squareness of .0004"/0.01mm, angle vee of 90º and 0-60º adjustable angle by locking hex screw on the bottom.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 530-101

The Mitutoyo 530 series vernier caliper has two sets of jaws for measurement in metric units of outside dimension (OD), inside dimension (ID), step, and depth (when depth bar is included), for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with both the upper and lower scales measuring in metric units. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. When included, a depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the mai...