Dimensional Measurement - Page 847

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's thread gages inspect the pitch diameter and the functional thread for both internal and external threaded products. All thread gages are marked with nominal size, class of fit and pitch diameters.

Manufacturer: Generic Brand: Generic Color: Multi

This Four-piece Combination Square Has Cast Iron Square; Center Heads; And 12 Blade With Graduations Down To 64ths. Square Head Features Spirit Level And Hardened Scriber. Includes A Direct Reading Double Protractor Head. Comes In A Protective Plastic Case.SHIPS SAME DAY IF PAID FOR BY 4PM PST"

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-002-0

The Fowler 54-860 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. An ABS (acrylonitrile butadiene styrene) housing protects electronic components against impact and provides electrical insulation. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring range0 to 1"/0 to 25mmResolution0.00005"/0.001mmAccuracy0.00016"/0.004mmThimble styleFrictionData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manu...

Manufacturer: Westward Brand: Westward

Straight Edge, Construction Hardened And Tempered Tool Steel, Length 18 In, Width 2 In, Polished Finish

Manufacturer: Starrett Brand: Starrett Model: T436.1XFL-1

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: HHIP Brand: HHIP Model: 4101-1012

Supplied in a plastic, sturdy, dust-proof case. ~ Sizes are marked on the case for easy Identification. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Class ZZ ~ Overall length is 2". ~ Accuracy - 0.005mm + 0.000mm.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-455-010-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage's NPTF Tapered Pipe Plug Gages are used to check tapered internal pipe threads. Perfect for inspecting standard pipe and pipe fittings.

Manufacturer: Fowler Brand: Fowler

High precision Pin Gage (Plug Gage) sets at very economical prices. Offered in two grades of tolerance: Plus (+.0002 ) ). Fowler Pin Gage Sets come in a range of sizes. These accurate and well made precision tools are ideal for checking hole size, location, gage slots, distance between holes, go sizes etched on ranges over .061 Each gage checked against master gages traceable to the National Institute of Standards and Technology Gages are cylindrical, 2 in length and have no sharp corners Accurate to .0002 Gage increments are in .001 steps

Manufacturer: Starrett Brand: Starrett Model: 1463RL

The Starrett 1463 series stainless steel micrometer head has a vernier scale in inch units for taking precise measurements to 0.5”, and is made of stainless steel with a satin rust- and glare-resistant finish. It also has a knurled ring-type lock nut to hold measurements in place. The micrometer has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001” or 0.0001” depending on the model. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.