Dimensional Measurement - Page 851

Manufacturer: Hexagon Metrology Brand: Standard Gage Model: 00524105

The Standard Gage 00524105 electronic micrometer and caliper set includes a 0 to 1" outside micrometer, 0 to 6" calipers, and a depth measuring base for making precision measurements. The electronic micrometer has 0.0001" graduations on a chrome steel frame with precision of 0.00016" and an LCD with a numerical resolution of 0.00005". LCD function buttons include metric/inch conversion, zero setting, and origin. It has carbide-tipped measuring faces, a ratcheting friction thimble, and a nut for locking the spindle in place. The electronic calipers have a 0.0005" LCD resolution on a stainless steel frame. The calipers are made of stainless steel and have a thumb roller for adjusting the calipers. The depth measuring base is a T-bar style base that attaches to the calipers' ruled blade to aid depth measurement and is 76.2mm long to span holes and recesses for stable measurements. The calipers linear accuracy meets Deutsches Institut für Normung (DIN) 862 standards and the micrometer is Ingress Protection certified IP54 against dust and liquids. The electronic micrometer and calipers set comes with a fitted storage case and is typically used in manufacturing, machining, and mechanical engineering.SpecificationsMicrometer typeElectronic, outsideMicrometer measurement range0 to 1.0"Micrometer resolution0.00005"/0.001mmMicrometer precision0.00016"Micrometer LCD functionsAutomatic shut-off, metric/inch conversion, zero setting, and originMicrometer protection levelIP54Caliper typeElectronicCaliper measurement range0 to 6.0"Caliper resolution0.0005"Caliper LCD functionsOn/off, metric/inch conversion, and zero settingCaliper standardsDIN 862Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the ot...

Manufacturer: Starrett Brand: Starrett Model: T436.1XFL-2

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: CME Brand: CME Tools

12" - 16" RANGE. 0.001" GRADUATION. RATCHET STOP & LOCK NUT. CARBIDE MEASURING FACES. INERCHANGEABLE ANVILS ENAMEL FRAME. WITH STANDARDS IN FITTED CASE.

Manufacturer: Techtongda Brand: Techtongda magnetic chuck

Instructions： Put the workpiece on the suction table, and then insert the wrench into the shaft hole to turn clockwise180°, the workpiece can be sucked for processing. The workpiece is completed, the wrench can be inserted into the shaft hole to turn counterclockwise 180 °, you can remove the workpiece Maintenance： Sucker should be wiped clean before use to avoid scratching the surface, after using, the surface should be coated with oil to prevent corrosion. Use of ambient temperature: -40 ℃ -50 ℃. Do not knock, to prevent magnetic reduction. Strong dense pole permanent magnet sucker is for surface grinder, sparks machine, WEDM. Very fine spacing, uniform magnetic distribution, particularly for processing small thin parts. Worktable precision no change while magnetizing and demagnetizing. Panel with special treatment, no leakage, to prevent corrosion of cutting fluid. To prolong service life of the disk, it can be placed on the cutting fluid for storage.Six-surface fine grinding processing, the sucker can be used in  vertical direction on the wire cutting machine cutting. High-performance magnetic steel disk, with suction, almost no remanence. Suction can be 120N / cm2. Application: The magnetic chuckcan be used for processing various magnetic conduction work pieces. For surface grinder, tool grinder, EDM and other applications. Thin & light weight work piece are ideally suitable because of fine-pitched magnetic poles Item number: 170424 1 x Hex wrench 4 x Mounting tabs 1 x Magnetic chuck

Manufacturer: Starrett Brand: Starrett Model: T232RL

The Starrett 230FL series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a friction thimble mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.0001”. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle and anvil have micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Starrett Brand: Starrett Model: 210MAP

This Micrometer is ideal for quick comparisons of thread accuracy in screw cutting operations, measuring in small grooves or recesses where regular micrometers cannot be used, and for many other applications. It is 60 degree conical anvil and spindle faces with 0.4mm flat on the ends of the point. Quick and easy adjustment.

Manufacturer: Westward Brand: Westward

Outside Micrometer, Mechanical, Range 3-4 In./mm, Resolutions 0.0001 In./mm, Ratchet Thimble, Flat Anvil, Flat Spindle, Lock Nut Type Lever, Enamel Frame, Vernier Scale

Manufacturer: INSIZE Brand: INSIZE Model: ISP-Z3015-CHART

Overlay Chart.

Manufacturer: Westward Brand: Westward

Dial Indicator, Design Vertical, Graduations 0.0001 In., Graduations 0.01 mm, Range 0-0.001 In., Range per Revolution 0.001 In., Range per Revolution 0.05 mm, Dial Reading 0-10, Contact Points Carbide, Continuous Reading, Dial Size 2.5 In., Jeweled Bearings, Bezel Adjustable, Dial White, Features Full Jeweled Movement, Includes Fitted Case, Dovetail Clamps

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 151-271

The Mitutoyo 151 series micrometer head has a wide 8mm-diameter spindle for heavy-duty use and a vernier scale in inch units for taking precise measurements. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.001” or 0.0001” depending on the model, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.