Dimensional Measurement - Page 853

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2312-4010

Range: 3-4"/75-100mm Resolution: 0.001mm.(0.00005") Accuracy: ±0.003mm mm/inch conversion. ABS/INC switchable. Reset/Pre-set. Hold function. Hold function for max. or min. values. Non-rotating spindle. Blade penetration = 0.315" Blade thickness = 0.03" Blade width = 0.256"

Manufacturer: Starrett Brand: Starrett Model: T436.1XFL-3

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: DeFelsko Brand: DeFelsko

The PTB P5 Coating Thickness Gauges Polystyrene Test Block Kit is ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

Manufacturer: DeFelsko Brand: DeFelsko

The PTB P3 Coating Thickness Gauges Polystyrene Test Block Kit is ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The Brown & Sharpe Bestest-3 series dial test indicator set has a white face and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow face dial face rotates. The white dial and a contrasting black hand help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a dial test indicator, a 0.080" (2mm) carbide contact point, a rectangular bar, a swivel clamp, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range th...

Manufacturer: INSIZE Brand: INSIZE Model: 3206-100A

Outside micrometer with interchangeable anvils, 0-100mm, graduation 0.01mm.

Manufacturer: INSIZE Brand: INSIZE Model: ISV-VP60-R55

55° mirror.

Manufacturer: Aircraft Tool Supply Brand: Aircraft Tool Supply

Complete Precision Electronic Measuring Set includes: 6"Electronic caliper - .0005" (.01mm) resolution w/ patented ceramic chip, 0-1" (0-25mm) Electronic Micrometer - .0005" (.001mm) resolution. Reads directly in inch or metric. Includes fitted case.

Manufacturer: ZFE Brand: ZFE

ZFE 1 Set Of M36X4.0mm Metric Thread Ring Gage Gauge Set Metric M36x4.0mm Thread Ring Gage. Thread pitch: 4.0mm Class: 6g T pass and Z not pass

Manufacturer: Flexbar Brand: Flexbar

Precision Dial Thickness Gages. Made in Japan. Features: Gage Mounted in hand Grooved enameled frame With thumb release mechanism. High Grade steel Measuring Faces. Hardened stainless steel spindle. Hardened, ground and lapped for accuracy. Dull chrome plated indicator Case. supplied in a Deluxe velvet-lined Case. Model No. 18124, Precision Dial Thickness Gage. Range: 0.5" Throat Capacity: 1" Graduation: .0001 Reading: 0-10