Dimensional Measurement - Page 855

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: #AC21-1022-2022-3022

Battery used is button cell LR44 or SR44 (1.5V) •Large Display •Auto On and Off capabilities •Absolute, floating zero, and relative measurements -(you can zero out at any point) •Including Item Range Qty AC21-1022 0-25mm/0-1" 1 AC21-2022 25-50mm/1-2" 1 AC21-3022 50-75mm/2-3" 1

Manufacturer: Starrett Brand: Starrett Model: T436.1XFL-4

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: CME Brand: CME Tools

1.0" - 1.2" RANGE. SELF-CENTERING 3-POINT FOR ACCURATE MEASUREMENT OF INTERNAL DIAMETERS. HIGHLY DURABLE CARBIDE-TIPPED CONTACT POINT. MEASUREMENT CAN BE TAKEN CLOSER TO THE BOTTOM OF THE BLIND BORE., AND CAN BE TAKEN INTO A DEEP HOLE WITH AN EXTENSION. RATCHET STOP PROVIDES UNIFORM MEASURING PRESSURE AND ASSURES HIGHEST READING ACCURACY. SETTING RING ACCURACY WITHIN +/-0.00002". READING: 0.0002"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-225

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: T63RL

The Starrett 63 series long range micrometer head has long spindle travel, and a vernier scale in inch units for taking precise measurements to 2”. The micrometer has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001” or 0.0001” depending on the model, and has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Moore and Wright Brand: Moore & Wright

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 112-237CAL

The calibrated Mitutoyo 112-237CAL micrometer is for measuring the web thickness of drills, small grooves, keyways, and other small areas that are difficult to reach. The micrometer has a measurement range of 0 to 1.0", graduations of 0.001", and an accuracy of + or - 0.00015". This model has a standard scale in inches. The anvil and spindle have 30-degree points and are carbide-tipped for durability. This gauge has a ratchet stop to help provide uniform pressure for precise, repeatable measurements. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This micrometer has a hammertone baked-enamel finish for durability. This micrometer comes with a fitted, plastic case.SpecificationsDisplay typeStandard scale in inchesAnvil/spindle stylePointed, 30-degree tip, carbide tippedRange0 to 1.0"Graduation0.001"Accuracy+ or - 0.00015"Thimble styleRatchet stopDimensionsApproximately 0.012" point radius, 55.3mm length and 38mm throat depthWeight205gMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, o...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-792B

.5 In/12.7mm, .00005 In/0.001mm, ID-S ABSOLUTE Digimatic Indicator, 3/8 In stem, Flat Back, With SPC Data Output, ANSI.

Manufacturer: Starrett Brand: Starrett Model: T436.1XFL-5

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Flexbar Brand: Flexbar

Standard Beam Electronic Height Gage features Large, clear LCD display which eliminates errors in Readings. Non-contact Measuring System; oil and chip Proof. Can be Zeroed out at any Height. instant inch/Metric conversion. .0005/.01mm resolution. Carbide Tipped scriber. Fine adjustment mechanism. Battery included. Model No. 15800, Standard Beam Electronic Height Gage. Range: 0-12"/300mm