Dimensional Measurement - Page 859

Manufacturer: Moore and Wright Brand: Moore & Wright Model: MEB-MW210-02DDL

Founded in 1906 by innovative young engineer Frank Moore, Moore and Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineers tools.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-174-018-0

The Fowler 52-174-018 is a height gauge with a Vernier scale, a hand-operated slider, an offset carbide-tipped scriber, a rust-resistant satin chrome finish, a measurement range of 0 to 18" (450mm), and is precise to 0.001" (0.02mm). The adjustable main scale has a full 3/4" adjustment range. Zero setting capability resets to zero or any reference figure at any point for easy reading without special calculations. A calibrated screw mechanism supports fine, uniform slider adjustments. A swing-away magnifier plus extra-long Vernier scales with wide separations in inch and metric provide exact and precise reading. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability, and offset for direct reading over the full range of travel. The satin chrome finish on the scales resists rust and is glare-free. Raised lands on the main scale surfaces prevent friction wear. The hardened stainless steel beam and slide provides durability. The base and measuring surfaces are constructed of hardened tool steel and are ground and microlapped. The base is ergonomically shaped for ease of handling. The gauge comes with the scriber, and a magnifier. Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. The Fred V. Fowler Company manufactures inspection...

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage. Model CS Type: C (2 Round buttons and Anvil) Frame No. 12X Range: 7 1/8 - 7 5/8

Manufacturer: Checkline Brand: Checkline

Materials used: steels, aluminum. Range in steel: 3/16" (0.40" - 2.0"), 1/4" (0.40"- 6.0"). Wearface diameter: 3/8". Crystal diameter: 1/4" 3/16" diameter, 10 MHz, dual element transducer Cable: Potted cable, side in

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-796CAL

The calibrated Mitutoyo 543-796CAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or – 0.00012". The LCD displays in both inches and metric units. This model has a lug back for mounting from the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP53 for protection against dust and spraying water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" (0.001mm)Accuracy+ or – 0.00012"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with lug backData outputYesDimensions103.9 x 59 x 27.5mm (H ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 331-251-30

Mitutoyo 331-251-30 SPM-25MX, Micrometer, Spline, 10 mm Spline, 0-25 mm, 0.001 mm, IP65.

Manufacturer: Tlegend Instrument® Brand: Tlegend Instrument

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description Micrometers furnished with setting ring For measuring various inside dimensions NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Motionics Brand: Motionics Model: BDLT-102

BlueDial-LT is the lite version of original BlueDial. It comes with a dial indicator of high resolution and high accuracy. The integrated Bluetooth Low Energy transmitter continuously streams measurement readings at the rate of 8 samples per second. Users can directly view and record measurement readings on their smart device screens at a distance of up to 10 meters. With a more affordable price, users can still expect high accuracy displacement measurement and the convenience of wireless data transmission. This item is built and shipped from TX, USA

Manufacturer: tuopuke Brand: Tuopuke Color: Black

Heat Press Style: Clamshell 5" x 5" Non-Stick Coated Heat Plates Gauge Reading: Fahrenheit or Celsius degree measure Digital Temperature Control Digital Automatic Timer Voltage: 110V-120V Temperature Range: 0° - 415º F Features: Rugged and durable for years of trouble-free performance Thick items capable (up to 1/2 inch thick) Micro processor precision heat and temperature gauge Scratch resistant baked-on paint Full range heating coils for quick heat up Heat indicating light Electronic time control indicates completion of heat press cycle Four Points to Make Rosin 1.Choose The Starting Plant Material.Better to choose the enough trichomes or crystals material 2. Applying Intense Force.Quick clam fits the need of rosin tek 3. The Right Temperature.Rosin is pressed with temperatures from 170F to 300F, with most target temperatures around 200F. At temperatures above 315F you begin to degrade the psychoactive chemicals 4. Length of Time.Press the plant material and watch the extract seeping out of the plates onto the parchment,the length of the time is very important.the easy swing rosin press is great press for new users interested in rosin.

Manufacturer: DeFelsko Brand: DeFelsko

The CMP A1 Coating Thickness Gauges Epoxy Coating on Aluminum Plates (4) is ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution.