Dimensional Measurement - Page 863

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 3011-6051

Manufacturer: INSIZE Brand: INSIZE Model: 1156-300

Electronic Height gage with driving wheel, 0-12"/0-300mm.

Manufacturer: china Brand: Unknown

1. Products Description: This coating thickness gauge comes with F type probe and NF type probe,The F probe detect the thickness of non-magnetic materials such as paint, plastic procelain enamel, copper, zinc, aluminum, chrome etc. on magnetic materials such as iron, nickel and etc... It is widely used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper,?and?etc. The NF probe measures the thickness of non-magnetic coatings on non-magnetic metals. It is widely used in anodizing, varnish, paint, enamel, plastic coatings, powder applied to aluminum, brass, non-magnetic stainless steel, etc... Features as following: LCD display : 4 digits, 10mm LCD Coating thickness range : 0 - 1250 um / 0 - 50 mil Operating principle: magnetic induction/eddy current (F/NF) Resolution; 0.1/1 Accuracy: ±1-3%n or ±2.5um Min. measuring area: 6mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating conditions:0-+45℃(32℉-104℉),≤90%RH Unit size : 126 x65 x27 mm (5.0 x 2.6 x 1.1 inch) Unit weight : approx. 160g / 0.073lb (not including batteries) 2. Standard Delivery: 1x Main Unit 1x F probe 1x N probe 1x F calibration base set 1x N calibration base set 1x Calibration foil set (4 foils) 1x Carrying case 1x Operation manual

Manufacturer: INSIZE Brand: INSIZE Model: ISM-PM160LA

Digital measuring microscope.

Manufacturer: Starrett Brand: Starrett Model: 685M-2Z

These gauges directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gauge should read the set number stamped on the back of the indicator. In case of wear, the gauge may be adjusted to read the proper number.

Manufacturer: Mahr Federal Brand: Mahr Federal

.500" Hand Held Thickness gage

Manufacturer: Checkline Brand: Checkline

Spare / Replacement probes for 6000 Series Coating Thickness Gauges. All probes are supplied with a NIST Traceable calibration certificate.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-520-414-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Checkline Brand: Checkline

Spare / Replacement probes for 6000 Series Coating Thickness Gauges. All probes are supplied with a NIST Traceable calibration certificate.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.