|
|
-
4.2 of 5.0 with 41 Reviews
SALE PRICE: $695.00 1% OFF
Manufacturer: DeFelsko
Brand: DeFelsko
Manufacturer: DeFelsko
Brand: DeFelsko
The Spare Probe for PosiTector 6000 N0S Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.
-
4.2 of 5.0 with 42 Reviews
SALE PRICE: $715.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-558
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-558
|
The Mitutoyo 209 series Digimatic internal tube thickness caliper gauge has a combination analog/digital LCD display and large measuring depth for taking inside dimension (ID) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach internal dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring internal wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer for statistical process control (SPC) through an interface cable (sold separately). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the m...
-
4.2 of 5.0 with 25 Reviews
SALE PRICE: $729.50
Manufacturer: Berntsen
Brand: Berntsen
Manufacturer: Berntsen
Brand: Berntsen
With the mini prism RSMP10 surveyors can now easily take measurements in cracks, gaps and corners. Fixed dimensions (see product drawings) give the surveyor the exact path from the point of measurement to the base of the housing or the tip of the spike.
-
4.2 of 5.0 with 18 Reviews
SALE PRICE: $735.00
Manufacturer: Starrett
Brand: Starrett
Model: 823FZ
Manufacturer: Starrett
Brand: Starrett
Model: 823FZ
The Starrett 823 Tubular Inside Micrometer Set features .001-Inch graduation, with 10 rods and handle, 1-1/2-32-Inch range, and 1/2 and 1-Inch movement of screw.
-
4.2 of 5.0 with 13 Reviews
SALE PRICE: $744.00 7% OFF
Manufacturer: Phase II Plus
Brand: Phase II Plus
Model: UTG-2800
Manufacturer: Phase II Plus
Brand: Phase II Plus
Model: UTG-2800
The use of Ultrasonic non-destructive testing (NDT) to check material properties such as thickness measurement, is now extensively used in all facets of industry. The ability to gauge thickness measurement without requiring access to both sides of the test piece, offers this technology a multitude of possible applications. Metals, plastics, ceramics, glass and other materials can easily be measured by portable ultrasonic thickness gauges with a common accuracy of.001". Ultrasonic thickness gauges measure the thickness of a part by measuring the time sound travels from the transducer through the material to the back end of a part, and then measures the time of reflection back to the transducer. The gauge then calculates the thickness based on the velocity of sound through the material being tested.
-
4.2 of 5.0 with 43 Reviews
SALE PRICE: $758.54 1% OFF
Manufacturer: Checkline
Brand: Checkline
Manufacturer: Checkline
Brand: Checkline
|
The PosiTector gauge body accepts all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes allowing it to function as acoating thickness gauge, dew point meter, surface profile gauge or wall thickness gauge. Two body types are available, a standard monochrome display as well as an advanced color model. The Standard model features a high contrast, reversible color LCD, memory for 250 data points and USB data output. The Advanced model features a high contrast reversible color LCD, memory for 100,000 data points, USB, WiFi and Bluetooth output. Advanced Body and Probe Features Automatic Probe Recognition Made in the USA 2 Year Warranty Flipable display enables right-side-up viewing USB port for fast, simple connection to a PC and to supply continuous power. USB cable included. Software updates via web keep your gage current Recognized as a USB Drive - stored readings and graphs can be accessed using universal PC/ Mac web browsers or file explorers. No software required. Screen Capture - record and save image into USB flash memory for record keeping and review. Supplied with protective rubber shell, belt clip and wrist strap  [custom1] Power 3 AAA batteries, Included Dimensions 5.75" x 2.5" x 1.2" (146 x 64 x 31 mm) Weight 5.8 oz. (165 g) without batteries Protection Class Meets or exceeds IP5X, Solvent, acid, oil, water & dust resistant Warranty 2 Years [/custom1]
-
4.2 of 5.0 with 4 Reviews
SALE PRICE: $783.30 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 1150-600
Manufacturer: INSIZE
Brand: INSIZE
Model: 1150-600
Electronic Height gage, 0-24"/0-600mm.
-
4.2 of 5.0 with 13 Reviews
SALE PRICE: $786.99 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Internal micrometers
-
4.2 of 5.0 with 23 Reviews
SALE PRICE: $795.00 1% OFF
Manufacturer: REED Instruments
Brand: Reed Instruments
Model: R7900
Manufacturer: REED Instruments
Brand: Reed Instruments
Model: R7900
|
Two-point calibration • 128 x 64 LCD with LED backlight displays metric and Imperial units of measure, user selectable • Coupling status indicator • Good accuracy (0.1mm and less) can be achieved using standard timing techniques • Can be easily deployed, does not require laboratory conditions • Auto sleep and auto power off function to conserve battery life • Applications include monitoring various pipes and pressure vessels in production equipment, monitor the thinning degree during use • Includes transducer, couplant, 2 x 1.5V battery, and carrying case Transducer Specifications Frequency: 5MHz Range: 1.2 to 300.0mm (steel) Minimum Area: Ø20mm × 3.0mm (Ø0.8" × 0.12") Measurement Range: 0.65 to 400.0mm (0.03 to 15.7") Sound Velocity Range: 1000 to 9999 m/s (0.039 to 0.394 in/µs) Display Resolution: High: 0.01mm or 0.1mm (< 100.0mm); Low: 0.1mm (> 99.99mm) Accuracy: ±0.04mm (< 10mm); ±(0.1% thickness + 0.04mm) (< 100mm); ±(0.3% thickness) (> 100mm) Measurement Speed: 4 per second for a single point measurement Memory: 5 files, up to 100 values for each file (total of 500 logs) Communication: RS-232 serial port (optional) Power Supply: 2 x 1.5V AA batteries Battery Life: 100 hours typical w/ LED backlight off Dimensions: 150 x 74 x 32mm Weight: 238g.
-
4.2 of 5.0 with 12 Reviews
SALE PRICE: $840.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-536
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 209-536
|
The Mitutoyo 209 series Digimatic caliper gauges have a combination analog/digital LCD display and large measuring depth for taking outside dimension (OD) measurements of hole diameters, thickness of grooves or tubes, and other hard-to-reach outside dimensions. Depending on the model, these units may come with either ball contact points suitable for measuring external wall thickness of tubes, or disc contact points suitable for measuring flat surfaces. The calipers have an Ingress Protection 67 (IP67) rating, which ensures that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. At minimum, functions include zero-set, preset, automatic power off, inch/metric, and conversion data hold. An output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (sold separately) for statistical process control (SPC). The unit comes with, and is powered by, a single AA battery that lasts approximately 350 hours with continuous normal use. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the ...
|
|