Dimensional Measurement - Page 937

Manufacturer: CAS Corporation Brand: CAS Model: CI-2001AS

The CI-2001AS Indicator, with stainless steel enclosure. Use in a variety of applications - floor scales, livestock scales, platform scales, pallet scales, and much more. With it's bright red display, the CI-2001AS Indicator is easy to read. Legal for trade.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 147-352

The Mitutoyo 147 series hub micrometer has a shallow-throated frame for measuring hub thickness and shoulders inside a bore, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer has a baked enamel finish for protection and durability of frame. The vernier scale on the thimble and sleeve is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 222XRL-1/2

This Micrometer reach over the edge of sheet metal and take measurements away from the edge toward the center. Also for other gaging jobs where a deep throat micrometer is needed. Rounded anvil on 1" size gives a point contact for more accurate gaging; flat anvil is also available. The 1/2" micrometer is satin chrome frames; 1" micrometer frames have black wrinkle finish.

Manufacturer: Starrett Brand: Starrett Model: 222XRL-1/2

This Micrometer reach over the edge of sheet metal and take measurements away from the edge toward the center. Also for other gaging jobs where a deep throat micrometer is needed. Rounded anvil on 1" size gives a point contact for more accurate gaging; flat anvil is also available. The 1/2" micrometer is satin chrome frames; 1" micrometer frames have black wrinkle finish.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 133-180

The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in metric units for taking precise inside dimension (ID) measurements of the inside of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: ISM-M2000-15X

15x eyepiece (view field: 63 inch diameter).

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage. Model CS Type: C (2 Round buttons and Anvil) Frame No. 11X Range: 6 1/8 - 6 5/8

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 145-189

The 145 series vernier inside micrometer has caliper-type jaws and a vernier scale in metric units for making precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fowler Brand: Fowler

Fowler Datum Set .59015mm 53-105-180-0

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 03.10001

The Brown & Sharpe TESA precision outside digital micrometer has a mechanical digit counter for precise reading to 0.1mm, a vernier scale in metric units for taking precise outside diameter (OD) measurements, a friction drive thimble mechanism for uniform pressure during adjustment, and tungsten carbide faces for wear resistance.The vernier scale on the thimble and sleeve is graduated to 0.001mm, with slanted markings on the barrel to help reduce parallax errors when reading, and a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.