Dimensional Measurement - Page 951

Manufacturer: HHIP Brand: HHIP Model: 4103-0302

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: Vermont Gage Brand: Vermont Gage

The Vermont Gage steel go (+) plug gage is a class ZZ inch gage for calibrating measuring equipment and gage parts. A certificate of accuracy traceable to NIST is available for each gage, and each pin is marked with its size and direction of tolerance in sizes over .060”. Each gage is sealed in a volatile corrosion inhibitor (VCI) bag and packaged with a rust preventative. All gages measure 2” long, are within .00001” round (per ASME B89.1.5), and have at least a 10-microinch finish or better for a smooth finish. This gage is made of tool steel 60/62 Rc (cold stabilized) for durability and has a black guard finish to inhibit corrosion and for indicating wear. Sizes are available from .0040” to 1.0005” (increments of .001”), with a tolerance of +.0002” for longer wear. Plug gages are precision ground cylindrical steel plugs used to measure the diameter and depth of drilled or machined holes. They are available in different classes, based on acceptable tolerance (allowed deviation from the stated size). Standard tolerances and classes for cylindrical gages up to .825” are as follows: Class XX (.00002" or .0005 mm), Class X (.00004" or .0010 mm), Class Y (.00007" or .0018 mm), Class Z (.0001" or .0025mm), and Class ZZ (.0002" or .0050 mm). For gages with a wider diameter, tolerance gradually increases for each class. Since 1968, Vermont Precision Tools, Inc. (VPT) has been manufacturing a variety of precision round and ground pins, perforators, and special punches. Vermont Gage was formed in 1980, and manufactures a wide range of fixed limit gages. Located in Swanton, Vermont and Franklin, Kentucky, Vermont Gage manufactures 98% of the products they sell and is ISO 9001:2000 and ISO 17025 quality certified.

Manufacturer: uxcell Brand: uxcell

Features: Wied DC12V Working Voltage, Red light, plastic cap, White cables.The DC 12V Indicator Lamp is suitable for water heating use.

Manufacturer: Stanley Brand: Stanley Model: 30-456

For over 170 years, STANLEY has developed and delivered tools that have helped to build this great nation of ours. Through decades of innovation, STANLEY has become a trusted name in tools for professionals and consumers alike. Today, we continue this tradition of innovation with a full lineup of products made right here in the U.S.A with materials from all over the world. We’re committed to creating the next generation of tools that will keep America running strong

Manufacturer: ToolUSA Brand: ToolUSA

Made Of Strong Aluminum, This One Holds Up To What The Job Takes! Measures Accurately In Both Inches And Millimeters; Dependable For Inside, Outside And Depth Measurements. Locking Screw. * Has Locking Screw To Hold In Place * Measure From Inside And Outside * Chrome plated steel construction * 0-6" in 1/128 in. graduations and 0-155mm in 0.05mm graduations *Thumb screw locks reading in place and rolling adjustment for precise jaw positioning BLACK FRIDAY Specials -Cyber Monday & Holiday Deal

Manufacturer: HHIP Brand: HHIP Model: 4103-0588

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: INSIZE Brand: INSIZE Model: 6284-10

Styli for dial Test indicators.

Manufacturer: BQLZR Brand: BQLZR Model: N08519

Note: The color of the item may vary slightly due to photography and your own computer Feature: Steel taperlock handle. black silver tone color. Used for gaging internal thread. Double end, steel material. Go/no go design. Convenient to measure with hex handle. Ideal measuring tool. Used widely in car, motor, machinery, etc. Specification: Material: bearing steel Color:Silver and Black Tolerance levels: 6H Thread features of the code: M Nominal thread diameter: 4mm Probe Pitch: 0.7mm Usage: Comprehensive test piece within the thread size is in the range of tolerance Note: Please wipe before using a clean, prohibit the use of the rotating workpiece, for checking the accuracy of the product please use the master gauge thread after use please note antirust Dimension:75 x 8mm/2.95 x 0.31"(L x Dia) Weight:18g Package Include: 1 x Metric Double End Hex Handle Thread Plug Gage Gauge Tool 1 x Plastic Case

Manufacturer: SODIAL (R) Brand: SODIAL(R)

* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. SODIAL(R) Digital Electronic Millimeter Thickness Caliper Carbon Fiber Composite 0-150mm GaugeMaterial: Carbon fiber composite Measuring range: 0-150mm / 0-5.9in Resolution: 0.1mmAccuracy: ¡À0.2mm / 0.001in Power: 1 * 1.5V SR44/LR44 button battery(not included) Operating temperature: 0-40 Degrees Celsius Storage temperature: -20-70 Degrees Celsius Influence of humidity: ¡Ü 80% Product size: 24 * 7.7 * 1.2cm / 9.4 * 3 * 0.5in Product weight: 61g / 2.2oz Package List: 1 * Digital gauge Note: Remove battery when you don't use it for long periods.Note:Light shooting and differnent displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is ¡À1-3 cm.

Manufacturer: uxcell Brand: uxcell

Features metric measurements marked on each leaf, easy to read.Flexible and leaf can be stacked together when not in use.A tool used to measure gap widths, mostly used in engineering to measure the clearance between two parts.