Dimensional Measurement - Page 971

Brand: Fairgate

1 1/2" wide aluminum blade with deeply cut highly visible graduations. Cork backed non-slip blade is securely riveted to durable high-impact 9" wide plastic head. Blade graduation in 8ths and 16ths; head graduation in 8ths.

Manufacturer: North Coast Medical Brand: North Coast Medical

Accurately measure large joints.

Manufacturer: Case Kingdom Brand: Case Kingdom

Range: 0-150mm/6" Resolution: 0.1mm/0.01" Accuracy: ?.2mm Remarks: With depth bar Measurement types: internal dimension, external dimension, depth and steps Large LCD Display Automatic turn-off function Measure range: 0 - 6" (0 - 150mm) Maximum measuring speed: 60"(1500mm)/sec. Measuring system: linear capacitive Working temperature: 41 - 104F (5 - 40C) Power: One silver oxide battery 1.55V SR44(Built in it) Note: Accuracy affected in environment exceeding 80% relative humidity

Manufacturer: Aime Ledin Brand: Aime Ledin Model: CO20013

Made to exacting standards in St Etienne France by Aime Ledin Construction Mecanique Aime Ledin has been making industrial quality measuring tools since 1902. This pair of dividers is made from high-grade carbon steel with hardened and finely ground points. They feature a quick-spring nut for rapid and precise fine adjustments that will securely hold any measurement. Adjustment mechanism is centrally located to assure smooth action. The robust "Yankee" style flat-leg construction makes the unit very durable. They have a burnished and hardened spring for years of service.

Manufacturer: Hugston Brand: Hugston

Need to get precise measurements quickly and easily? Get the certainty and accuracy you need with our Digital Caliper! • Do you find those tiny numbers on your ruler, tape measure or analog caliper hard to read? • Unsure about how worn your tire tread is, or whether that stone will fit that jewelry setting? Or used shell casing jamming? • Need the precise size of that shaft or bearing you are replacing? Introducing the 6"/150 mm water resistant digital caliper! • You get a large, easy-to-read LCD screen • Precise measurements (see Tech Details below) • Automatic shut-off • One button switch between inches or millimeters • Smooth, brushed all stainless steel, no plastic, glides easily without sticking • Position lock for duplicate measurements • Capable of measuring inside and outside dimensions, step and depth measurements • Can be set to Zero at any position, for differential measurement What you get: • One caliper in a hard, molded plastic case • 2-3V batteries plus small screwdriver Right now we are offering a great low price, but we cannot guarantee how long we can keep it this low. So get your measuring done quickly, easily and accurately with this quality, affordable instrument, by clicking the buy button and ordering yours now!

Manufacturer: Taytools Brand: Taytools Model: MS-1

This micrometer stand will allow benchtop use of standard micrometers or other small hand tools. It will make using a micrometer much easier and more accurate .Cast iron base is a generous 4.75" wide x 6.5" long. Rubber lines jaws will protect measuring tools, are 1.5" wide, will open to .75" and will accept most inside and outside micrometers. Jaws rotate 50 degrees forward and 30 degrees back. Knobs will securely lock jaws in any position. Overall height is 4.5". Weight is 44 ounces.

Manufacturer: PEC Tools Products Engineering Company

This precision 300 mm metric rigid ruler is made in the USA by Products Engineering Company (PEC Tools), a premier tool manufacturer. Rule is made from spring tempered and hardened steel and is 1.00" wide by .036" thick. It has a "high-contrast" black chrome finish that provides better rust resistance than polished steel and can be easily read in both low and bright light conditions. The sides of each rule are ground parallel and each end is accurately ground square to allow reading from either end. Metric graduations have .5mm and mm markings on both sides. Graduations are precision photo etched and then white filled for easy readability.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe ball-shaped, TESA steel contact point has an M1.6 thread size, and is designed for use with Interapid series metric dial test indicators. Steel contact points are designed for general shop use.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: Prime Brand: Prime

The Portable 12 Volt Battery Level Indicator shows the percentage of the charge and has a large illuminated, easy to read display. The battery level indicator is for all types of 12 volt batteries including auto, RV, marine, and motor cycles. It is simple to use. Just clip the black lead to the negative terminal and the read lead to the positive terminal. The indicator will show a undercharge or overcharge on your battery.

Manufacturer: INSIZE Brand: INSIZE Model: 4209-7

Long handle telescoping gage, 4-3/4 ~ 8 inch.