Dimensional Measurement - Page 986

Manufacturer: upHere Brand: upHere

FEATURES: Instant measurement of distance, area & volume with one button operation: YES Wide measuring range: YES High accuracy: YES Automatic calculation of Area and Volume: YES Indirect measurement by Pythagorean Theorem: YES Single/Continous measurement: YES Max/Min distance tracking (display value): YES Easy Addition/ Subtraction of measurement: YES Set up front / rear benchmark: YES Selectable meter(m), inch(in) and feet(ft): YES Data store/ recall function: 20 data store Data Hold / Data clear function: YES Level bubble: YES Easy targeting with bright laser pointer: YES Large LCD with backlight and multi-line display (4 lines): YES Auto correction and error report technology: YES Auto / Manual power off function: YES Multifunction with intelligent calculation: YES CE, ROHS, FCC certificate: YES SPECIFICATIONS: Measuring range: 0.05 to 100m (0.16 to 328ft) Acurracy: 0.15mm (0.059 inch) Laser class: Class II Laser wavelength: 635nm Laser maximum output:

Manufacturer: AdirPro Brand: AdirPro Model: ADI715-06 Color: Black/yellow

The AdirPro16' Retractable Digital Measuring Tape with LCD Display is a multi-purpose and versatile tool that no one should be without. Whether you're redoing the bathroom, carpeting the bedroom or fencing in the backyard, the project requires precise measurements if you want to do the job right. With a large digital display, this tool gives measurements in feet/inches with 16ths, inches with 16ths, inches with 10ths (one decimal place), and centimeters with tenths (one decimal place). For added convenience, you can switch between imperial and metric systems with a simple touch of a button. It has a standard length of 16 feet and can be changed from outside to inside mode. You can start at zero to measure from where the tape exits the housing or with a 3-inch offset to measure from the back of the housing. In addition, you can switch the display to flip horizontally so it can be read from either side of the housing. Making life even easier, a hold function keeps the measurement taken on the display when retracting the blade, while the memory function retains this measurement even when the unit is off. Eight measurements can be held in memory storage for long- or short-term use. To provide long-lasting strength, the durable, hard plastic housing protects the internal, automatic, high speed, rewind system and brake system. The ¾" carbon steel blade is rust-resistant to protect it from wet weather and is thin enough to allow for some pliability when taking measurements. A bright yellow color serves to contrast the black and red markings on the blade, giving you standard measuring units of inches, 16ths, feet, centimeters and millimeters. This blade also features a steel hook at the end to allow for one-man operation. Please note: To avoid injury, use CAUTION when retracting the blade.

Manufacturer: GemRed Brand: Gemred

20 inch 500 mm digital protractor with rule 2 in 1. This super handy and precise digital protractor is perfect for making ultra-precise angled measurements and project layouts. They have the following features: 1) 1.375 inch wide by 20 inch long stainless steel blades with photo etched graduations in mm and quick reading 32nds 2) Closed length 20.4 inches, full open length 39.3 inches 3) Zero function allow setting of zero at any angle point 4) Display reads continuously as arms are adjusted 5) Measures both inside and outside angle measurements 6) Large clear LCD display 7) Strong blade lock holds securely for transfer of measurements 8) Measuring range: 0-360 degrees 9) Powers off after 5 minutes of nonuse 10) Resolution: 0.1 degree 11) Accuracy: +/- 0.3 degree 12) Repeatability +/- 0/1 degree 13) Battery: 3V CR2032 with approximately 5000 hours of continuous use

Manufacturer: Yakamoz Brand: Yakamoz

The Digital Caliper (sometimes incorrectly called the Digital Vernier Caliper) is a precision instrument that can be used to measure internal and external distances extremely accurately. Digital calipers are easier to use as the measurement is clearly displayed and also, by pressing the inch/mm button the distance can be read as metric or imperial. Features: 1. Heavyweight & Rugged design with Hardened Stainless Measuring Surfaces ensuring the accuracy. 2. Precision Fit Slide for Smooth and Accurate Sliding Action. Lock screw to hold the slide in position. 3. One button quick change between metric or imperial 4. Non-contaction linear CAP measuring system with easy-to-read large LCD display. 5. Ergonomic thumb adjustment with textured grip 6. Automatic shut-off after 5 minutes without using 7. Integrated depth rod & Zero at any position Specification: - Operating Temperature: 0℃ - 40℃/ 32℉ - 104℉ - Storage Temperature: -20℃ - 70℃/ -4℉ - 158℉ - Measuring Range: 0-6 inch/ 0-150 mm - Resolution: 0.0005 inch/ 0.01mm - Accuracy: ≤±0.02mm - Power: 1 x AG13 Battery (battery & replacement included) - Hardened stainless steel - IP54 Protection: Splash water, oil and dust resistant

Manufacturer: TTC Brand: TTC

TTC High Precision Vernier Calipers - Model: WH-5M Measuring Range: 0 ~ 100mm Graduation: Lower Scale:0.001", Upper Scale: 1/20mm Type of Reading: Metric Inside Measurement: Yes Meets all US specifications. Raised sliding surfaces prevent wear of graduations. Jaws designed for outside, inside measurements; all direct reading for vernier.

Manufacturer: True Power Brand: True Power Model: 04-0677

The digital protractor/angle finder is a one-of-a-kind product that measures angles accurately and quickly. It's ideal for checking and transferring angles for remodeling, cabinet installation, counter installation, measuring roof angles, fitting up windows or doors, aligning wood forms for concrete pouring, fitting up of carpeting and parquet or tile floors, aligning and checking of banisters and rails, checking for correct fit-up to any angled surface, and much more. It features a back-lit digital readout and has a hold function to freeze the measurements. Thumb-screw locks down the pivot when needed to prevent movement of the measured angle. Two spirit levels set at 90 degrees to each other for applications when you need a standard level.

Manufacturer: Q & K Brand: Q & K Color: RED

Specification： Light source: 5mw semiconductor laser Wavelength: Line: 635nm Linear accuracy: ± 2.5 / 5M Brake way: Reluctance moving Width:

Manufacturer: General Tools & Instruments Brand: General Tools Model: 145

Our Plastic Dial Calipers offer precision measurements at affordable prices, making them a great choice for hobbyists and do-it-yourselfers. This thousandths-reading caliper features a no-glare dial for accurate readings of inside, outside, depth and step measurements. The slide is easily advanced and retracted with a free-wheeling thumb roller, and the 6-inch bar scale is marked with 1/10 inch and 1mm graduations for accuracy.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Manufacturer: Oregon Rule Co. Brand: Oregon Rule Co. Model: SHBRWM/F-W23X36/84VU-BAN Color: White

Oregon Rule Co. Security Height Backdrops are bold, clear scales for quickly referencing height. Often these banners are often purchased for police departments for use in criminal lineups and mug shots. Other companies, like those in the medical field, use these tools as an easy height reference guide in their offices and examination rooms. Restaurants and retailers have used these banners in their crime prevention efforts. This Security Height Backdrop is 24 inches wide and 54 inches long. It is made of 0.10" thick reinforced white banner material with a smooth matte surface. Graduations are 1/2 inch increments, ranging from 3 Foot to 7 Foot. Numbers read vertically up with graduation lines extending across the face of the banner. To set up, simply measure 3 Foot from the base of the ground, and line up the bottom printed register line with this measurement. This backdrop includes 4 holes for hanging the banner with nails or tacks, employing 3/16 Inch brass grommets for durability. Backdrop reads 3 Foot to 7 Foot 1/2 Inch graduations, reads in feet-and-inches Dimensions are 24 Inch wide X 54 Inch long Bold black graphics on a white background Similar Products (Search Amazon by ASIN) ASIN: B00HVG9PDO - Security Height Rule - Fractional - 3 Foot 8 Inch to 6 Foot 8 Inch - White ASIN: B00HVGG7BM - Security Height Rule - Fractional/Metric - 80 Inch/203 Centimeter Long - White ASIN: B00HVH90YC - Kids Height Rule - Fractional - 80 Inch

Manufacturer: Vermont Gage Brand: Vermont Gage

Vermont Gage thread gages are made to precise class X tolerances and come standard with a Certificate of Accuracy. Thread members are made of steel.