Welljoin Wire Terminal Pulling-out Force Gauge Tester Digital 500N Force Meter

Wire Terminal Pulling-out Force Gauge Tester Digital 500N Force Meter
Test stand + 500 Newton Digital force gauge + Fixture
Test Stand Wire terminal Pulling-out Force Meter ADL is an instrument with a test stand, a 500 Newton digital force gauge and a fixture. With this device, you can guarantee for the quality of your product with more confidence, since it can test the pulling out force of variety of wire terminals. When testing the harness, the instrument can combine the digital force gauge(HF-500) and analogue force gauge (NK-500).
The standard configuration of terminal pull force tester is with digital force gauge (HF-500).
You can also config with analog force gauge(NK-500) and need more $38, if you need please contact us.
Horizontal installation
Manual operation, simple and stable.
This machine can be installed on the table (platform) to make the frame more stable to use.
Effective stroke: 50mm
Rated load: 500N (Can also be configured 1000N)
1. Digital force gauge HF-500 (standard)
Max. Load:500N(Kg, N and Ib three units can be converted automatically)
Resolution: 0.01N
Precision: ±0.5%
Output interface: RS 232 Nine holes socket
Charging power: 110-220V/AC, Batteries continuous working time: 6-8 hours
Stability: temperature drift: 0.2uV/°(0~60°C); null drift: ≤ 0.1%/8hours/FS Calibration range: Full range calibration
Environmental temperature: 0~+60°C
Environmental humidity:≤ 80%
Allow overload: 150%
Supply power mode: No. 5 Ni-MH battery, 220V AC, charging for 4-6 hours
2. Analog force gauge NK-500 (optional)
Max. Load:500N(50kg)
Push pull rod trip: 10mm
Working temperature: 20°C±10°C
Transportation temperature:-27°C~+70°C
Relative humidity: 15%~80%RH