Force Gauges

Manufacturer: Mark-10 Brand: Mark-10 Model: G1011

This attachment is designed to simulate a finger for testing pushbuttons, membrane switches, etc. Use this grip with a Mark-10 force gauge and test stand to create a complete compression testing system.

Manufacturer: NutraClick, LLC. Brand: Force Factor

You want max results from your workouts - who doesn't? Yet how many guys in the gym never see the size and strength they deserve? It's discouraging. But now there's cannabol, and it's changing everything. Cannabol is the new intra-workout breakthrough from force factor that's specifically designed to deliver unprecedented strength and muscle growth - results you can see, not just dream about. When taken during workouts, cannabol can significantly improve muscle anabolism, prevent catabolism, and short-cut recovery for serious gains. Simply put, you recover faster, train harder, and get bigger. Cannabol's key ingredients have been clinically shown to increase strength in both compound and isolation exercises, boosting total overall strength and enhancing cell volumization during training. Breakthrough science for transformative results "cannabol" is a fusion of cannibal and anabolic. Anabolic refers to the body's metabolic growth cycle. But cannibal? Well, the protein used in this formula has the same amino acid ratio as human muscle. That's part of what makes cannabol so unique, powerful, and effective. While other intra-workout bcaas try to one-up nature with concocted protein ratios, cannabol returns to the primary source, the original proportional fuel your body uses to build serious muscle. Cannabol contains zero carbs and calories. It's stimulant-free and it tastes great!.

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: NLB-200

Introduction: The NLB series Analog Force Gauge with compact size, high accuracy, they are easy to operate and handy to carry out, and can show the unit of newton and pound at the same time. The PEAK/TRACK knob of it can switch between the peak value load test and the continuous load test. They are excellent products which can take the place of the old style force gauges, and widely applied in electron, high & low voltage electrical appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile, and so on industries for test of pull or push load test, insertion force or pull and destructive experiment. Please read the manual carefully before using this instrument. Size: Please see the attached picture Specifications: •Model:NLB-200 •Max load:200 N/44 lbs •Min load:20N/4 lbs •Resulution:1.0 N/0.4 lbs •Rod journey:10 mm •Work temperature:20° C ± 10° C •Carry temperature:-27° C ~70° C •Relative humidity:15%~80% RH •Work environment:No vibrancy and no cautery Accessory: •Push clamp:4 •Pull clamp:1 •Added pole:1 •User's manual:1 •Check certificate:1

Manufacturer: Loos & Co Brand: Loos & Co. Model: 53846

The Loos Cableware metric tension gauge measures the tension in cables to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures. This analog gauge shows present tension in kilograms (kg) and has a measurement accuracy of + or - 5 percent. The gauge shows readings on a graduated scale, and a calibration table on the unit converts a scale reading to the corresponding present tension and percentage breaking strength of the rope, based on 302/304 1 x 19 stainless-steel wire rope. The gauge can remain hooked on the wire during testing while the tension is adjusted. The Loos Cableware metric tension gauge has an anodized aluminum body that resists corrosion and wear. A 1/4" hole on the gauge's body allows a lanyard or hook to be attached to the gauge for securing it to the cable.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Loos & Co. manufactures aircraft cable and wire rope and related measurement tools. The company, founded in 1958 and headquartered in Pomfret, CT, meets International Organization for Standardization (ISO) standard 9001.

Manufacturer: Mark-10 Brand: Mark-10 Model: M5-5

Series 5 premium digital force gauges feature a blazingly fast sampling rate of 7,000 Hz and ±0.1% accuracy, producing reliable, accurate results even in quick-action testing. Additional advanced features such as averaging mode, external trigger mode, password protection, and data memory for 1,000 readings make this flexible gauge series ideal for a wide range of applications. Capacities up to 1,000 lbF [5,000 N].

Manufacturer: Loos & Co Brand: Loos & Co.

The Loos Cableware metric tension gauge measures the tension in cables and rods to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures. This analog gauge shows present tension in kilograms (kg) and has a measurement accuracy of + or - 5 percent. The gauge shows readings on a graduated scale, and a calibration table on the unit converts a scale reading to the corresponding present tension and percentage breaking strength of the rope, based on 302/304 1 x 19 stainless-steel wire rope. The gauge can remain hooked on the wire during testing while the tension is adjusted. The Loos Cableware metric tension gauge has an anodized aluminum body that resists corrosion and wear. A 1/4" hole on the gauge's body allows a lanyard or hook to be attached to the gauge for securing it to the cable.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Loos & Co. manufactures aircraft cable and wire rope and related measurement tools. The company, founded in 1958 and headquartered in Pomfret, CT, meets International Organization for Standardization (ISO) stand...

Manufacturer: Nextech Global Company Limited Brand: Nextech Model: DFS500

DFS-Series digital force gauges are cost-effective tension and compression testing tools. Metal housings with large back-lit graphics LCD, these units fit perfectly in your hand. The display can be inverted, for a viewing that suit your testing position. Unit of measurement can be toggled by one simple key. Three modes of operation are easily selectable: Track mode displays live readings, Peak Compression and Peak Tension mode records the maximum reading sensed during the test. The gauge is ready to work without any setup. For a little more advance setup, the plain English language menu provide for simple setup of the instrument to your requirements. In Pass/Fail mode, programmable limits provide visual and audible indication if a test passes or fails. An analog bar graph provides perspective of current reading in comparison to the full scale range. The instruments can log up to several hundred readings at the push of a button. The data can be later viewed on screen, or sent to a computer through USB port. An easy to setup free windows based software program, with USB cable, are provided. DFS-Series are available from 11 to 2200 lb ranges, providing a large testing capacities for various applications. This is an advance force gauge that suit both simple and professional application.

Manufacturer: Jonard Industries Brand: Jonard Tools Model: GD-100

The Jonard large force gauge with round tip measures compression (push) force in quality control, process control, testing, and calibration applications. This analog dial gauge shows the present force measured in grams (g). A pointer on the dial shows the maximum (peak) force measured over the course of a test. It has a tolerance of + or - 0.01 (reading + maximum scale reading). The gauge's arm moves in either a clockwise or counterclockwise direction and can take readings in either direction. The round tip has measuring springs made from hard-tempered beryllium copper, for wear resistance, and can measure higher forces than a flat tip. The gauge's dial measures 2.5" in diameter.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Jonard Industries manufactures hand tools for telecom, fiber optics, and electronic industries. The company, founded in 1958 and headquartered in Tuckahoe, NY, complies with Restriction of Hazardous Substances (RoHS) directives in the manufacturing of all of its products.

Manufacturer: Mark-10 Brand: Mark-10 Model: G1058

This unique grip is designed to effectively secure samples for torque and pull tests. Typical applications include bottle cap torque testing, lid pull-off testing, and other tests. A matrix of threaded holes allows the serrated steel posts to be placed in positions specific to the test sample, with a broad diameter range of 0.2 - 3.5 in (5.1 - 89.0 mm). For torque applications, this grip can be used either manually with an STJ torque sensor or MGT torque gauge, or in test stand controlled applications. A typical torque test stand-based application will also typically require our G1023 bottle grip. For force applications, the grip can be mounted to a force gauge or test stand.

Manufacturer: Jonard Industries Brand: Jonard Tools Model: GD-50

The Jonard large force gauge with round tip measures compression (push) force in quality control, process control, testing, and calibration applications. This analog dial gauge shows the present force measured in grams (g). A pointer on the dial shows the maximum (peak) force measured over the course of a test. It has a tolerance of + or - 0.01 (reading + maximum scale reading). The gauge's arm moves in either a clockwise or counterclockwise direction and can take readings in either direction. The round tip has measuring springs made from hard-tempered beryllium copper, for wear resistance, and can measure higher forces than a flat tip. The gauge's dial measures 2.5" in diameter.Force gauges, also called push-pull gauges or tension gauges, measure the tensile (pull) or compression (push) force applied to an object. They are used to test the strength and functionality of a variety of machines, electronic components, cables, wires, and consumer products in scientific, medical, automotive, quality assurance, and manufacturing applications. A digital force gauge shows the amount of force in digits on the gauge's display. Response time varies among digital force gauges depending on the speed of the processor. An analog (or mechanical) force gauge shows measurements on a calibrated dial. Analog force gauges are not as precise as digital force gauges, but they provide instantaneous measurements and can be used in a wider range of environmental conditions than digital force gauges. Hooks, compression plates, levers, handles, test stands, and other accessories can be used with the gauge for taking measurements on objects with a range of shapes and sizes.Jonard Industries manufactures hand tools for telecom, fiber optics, and electronic industries. The company, founded in 1958 and headquartered in Tuckahoe, NY, complies with Restriction of Hazardous Substances (RoHS) directives in the manufacturing of all of its products.