Micro Screw Pitch Gauge Meter Electronic inclinometer digital gauge angle point scale box for RC helicopter airplane TLB-02

The products are used in automotive wheel alignment repair, woodworking machinery, machine adjustments, construction, engineering machinery operations and other essential tools for measuring angles. Small (can be in hand), practical, easy to carry, easy to read! Features: 1, aluminum case (lightweight and durable); 2, measuring range: + /-180.0 3, relative measurement and absolute measurement of conversion; 4, measured with a magnetic surface for easy absorption measurements in the iron object to be tested; 5,5 minutes automatic screen-off function; 6, portable size, easy to use with other measurement tools to expand the measurement range. Technical parameters: 1 Display Resolution: 0.1 2, Repeatability: +- 0.1 3, measuring range: +1 180.00 (0-360 ) 4, Power: 3V CR2032 lithium battery 5, the working temperature: 0 ~ 45 degree 6, the working current: <100μA 7, Dimension: 50.8mm × 50.8mm × 32.0mm 8, magnetic surface adsorption measurements, bottom diameter 0.8cm with 3 of the magnetic, can be adsorbed on the workpiece on the measuring 9, Net Weight: 0.12kg Instructions: First, touch ON / OFF button, was shut down, turn off the LCD screen, then tap the ON / OFF button was boot; Second, the initial state of liquid crystal display of 0.0 degree, when the left arrow to display the " up", it said right low left high, when the left arrow to display the "down", it said that low right high left. Third, the level of the instrument placed on the stage, tap the ZERO key, the value zero, liquid crystal display at this time measured 0.0 degree angle is the angle relative to the level sets of values. Fourth, the body can be attached to the bottom of the magnet device in the measurement of body iron material attachment, tap the ZERO key is cleared to do relative measurement.