ETCR LK6800D AC/DC Leakage Current Clamp Meter Clamp Leaker,Measurement of AC/DC Current, Peak Hold, Online Monitor,0.0A~2000A DC/AC Measurement Range

Technical Specification :
Measurement Range: 0.0A~2000A DC/AC
Resolution:0.1A
Accuracy:±2%rdg±3dgt
Test Mode:Clip-on CT, integral mode
Size of clamp:Φ68mm
Display Mode:4 digits LCD display
LCD Dimension:35mm×21.5mm; display domain: 32mm×15mm
Frequency:AC 45Hz~400Hz
Sampling Rate:2 times/s
Data interface:USB
Polarity Indication:DC current auto identified and display"-"
Test Position:Tested wire in the jaw center; Error will increase to 1.5%rdg max if deviate the center
Range Shift:Automatically
Line Voltage:AC600V
Software:with the software the data can upload to computer
Data Memory:99units, FULLblinks when the memory is full
Peak Hold:Push HOLD without release, the meter will show the peak value during the pushing period
Reading Hold:DH indicating the reading is hold
Out of Range:OL indicating the current is out of range
Auto Power-off:5 Minutes after power on, it will power off automatically to lower the power consumption
Battery Voltage:Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
Consumption:10mW
Temperature and Humidity:-10°C~50°C; Below 80%rh
Max error refer to environment:-10°C~0°C,40°C~50°C,Error will increase max to 1%rdg
Temperature and Humidity for storage:-10°C~60°C,below 70%rh
Insulating Strength:AC2kV/rms. (between the alloy of the clamp and the housing)
Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT â…¢(600V)