Absolute Digital Caliper 6" / 150 mm Accurate to 0.001"/6" Hardened Stainless Steel ODC-6

These 6"/150 mm digital calipers use a highly accurate Absolute encoder technology. This technology memorizes origin zero. ZERO buttons allows setting of "Absolute Zero" or origin at any point in the travel of the sensor. ABS button establishes "Incremental Zero" to allow measurement of relative or comparative distances. Hitting ABS button again returns reading to "Absolute Zero." "Absolute Zero" will need to be set once for it will be maintained for all future measurements, even when the instrument is switched off. Incremental measurements can be made at any time without losing the origin setting. Features: 1) Resolution: 0.0005"/0.01 mm 2) Repeatability: 0.0005"/0.01 mm 3) Accuracy: +/- 0.001"/0.02 mm per 6"/150 mm 4) Measuring speed: 1.5 meters per second or 60" per second 5) Power: 1.5 volt LR44 silver oxide battery-environmentally friendly 6) Battery life: 1 year under normal conditions 7) Operating environment: temperature- 0 Celsius (32 degrees) to 40 Celsius (104 degrees) ; relative humidity- less than 80% 8) Hardened stainless steel construction with high quality finish Functions: 1) Zero setting at any position 2) Switch between mm and inches with the push of a button and at any position 3) Able to continually keep track of origin position (Absolute Zero) 4) Switched from Absolute zero to incremental mode to measure relative or comparative distances 5) Automatic power off after 5 minutes of non-use 6) Automatically powers on when the slider is moved 7) Greater accuracy 8) Low battery consumption 9) Unlimited response speed, no over speed errors 10) Comes in molded plastic storage case