SHINA 66B CNC Automatic Tool Touch Sensor Normally Open With Blowing Setting Gauge Z-Axis Presetter Locator with Stroke 5mm For Mach3 etc

Feature:
Product model: SK-66B-KC.
Output mode: B:NC(normally open)
Pre trip: Almost 0
Trip: 5mm
Repeat positioning accuracy: 0.001mm(operation speed:50-200mm/min)
Life: 3000000 times.
Contact force: 1.5N
Outer shell: Grinding 4S.
Protection: IP67.
Cutter head: Diameter 20mm, hard carbide.
Shock rating: 20mA(MAX) DC24V recommended value(10mA)resistive load
Cable: 3M 4-cell tensile strength 30N Minimum bending radius R7
Protection Tube: 1M (Minimum bending radius R25)
Ultra travel alarm:
Exceed the specifications: NC(Normally open),distance signal about 5mm
Shock rating: DC24V 20mA(MAX) 10mA(Resistive load).
Classification:
Normally open with stroke protection and blowing

Installation Instructions:
1. The tool and make sure the contact surface on the knife perpendicular, and vertically downward into contact with the contact surface, please try to install the relatively small iron bench in place
2. Be sure to use within the rated power range, please control voltage DC5-24V, the current below 20mA, the use of ambient temperature range -25oC ~ 70oC.
3. Please knife tool diameter 20mm diameter or less control of the cutting speed please controlled 50-200mm / min, the tool center to fall on the flank of the center.
4. When use of blowing function, the outer diameter of tube diameter 6mm, inner diameter of diameter 4mm. Note that cleaning the contact surface attached to the iron and cutting oil.

Package Include:
1 x Z Axis Presetter with blowing.