|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $4.10 3% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-308
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-308
These sensors are for use with Manometers, Magnehelic Gages, Pressure Switches and other Controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input and discharge pressures, etc. The angled tips shown have 4" insertion depth. Each has four radially drilled .040" sensing holes. All except Model A-303 mount in 3/8" hole in duct. For portable use, a magnet holds No. A-303 in place. No. A-305 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical. No. A-307 and A-308 are suitable for use in low velocity systems or where the need for accuracy is less critical.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $6.67 2% OFF
Manufacturer: Dwyer
Brand: Dwyer
Manufacturer: Dwyer
Brand: Dwyer
6" Static Probe Straight Sensor, Intregal Flange, Stainless Steel, Gasketed, 2 Self Tapping Screws Included
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $6.67 2% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Dwyer Instruments, Inc.,DWA489,DWA489,STATIC TIP 4" SS W/FLNG
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $9.10
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-302
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-302
These sensors are for use with Manometers, Magnehelic Gages, Pressure Switches and other Controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input and discharge pressures, etc. The angled tips shown have 4" insertion depth. Each has four radially drilled .040" sensing holes. All except Model A-303 mount in 3/8" hole in duct. For portable use, a magnet holds No. A-303 in place. No. A-305 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical. No. A-307 and A-308 are suitable for use in low velocity systems or where the need for accuracy is less critical.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $10.32 31% OFF
Manufacturer: FREESCALE SEMICONDUCTOR
Brand: Freescale Semiconductor
Model: MPX5500DP
Manufacturer: FREESCALE SEMICONDUCTOR
Brand: Freescale Semiconductor
Model: MPX5500DP
FREESCALE SEMICONDUCTOR MPX5500DP IC, PRESSURE SENSOR, 0 TO 500KPA, SIP-6
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $17.53 13% OFF
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FSG2J24
Manufacturer: Schneider Electric
Brand: Square D by Schneider Electric
Model: 9013FSG2J24
This Square D Pumptrol 9013FSG2J24 electromechanical pressure switch with 40-60 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4" NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 hp or less pump. The adjustable differential range is 15-30 psi and the cut-out range is 20-65 psi. The cover is black. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $17.99
Manufacturer: DIYmall
Brand: DIYmall
Manufacturer: DIYmall
Brand: DIYmall
|
BME280 Pressure Temperature Sensor Module with IIC I2C for Arduino Descripton: The BME280 is a great new chip which was originally designed for the next generation of smartphones. It is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings. And just for fun they threw in a pretty solid humidity sensor in there as well! So with an I2C connection you have access to enough weather data to make some pretty good predictions for your local area. Or you can just use the pressure sensor with it's abililty to discern the difference in 7.5cm in altitude. The chip contains smarts to smooth out measurements (since it's so sensitive you don't want slamming doors to mess with your pressure readings, for example) which are fully under your control. Connection: GY-BME280 arduino vin----------------vcc GND--------------GND SCL----------------A5 SDA----------------A4 Package Included: 2 X BME280 Pressure Temperature Sensor Document link: https://drive.google.com/open?id=0B8DSGdAr8_31Y2paYVpLaThSVVk
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $18.85
Manufacturer: FREESCALE SEMICONDUCTOR
Brand: Freescale Semiconductor
Manufacturer: FREESCALE SEMICONDUCTOR
Brand: Freescale Semiconductor
FREESCALE SEMICONDUCTOR MPX4250AP IC, PRESSURE SENSOR, 20 TO 250KPA, SIP-6
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $21.25
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: ADPS-03-2-N
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: ADPS-03-2-N
The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and Pascals allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 0.08" WC (20 Pa) up to 20" WC (5000 Pa). The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases. The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $21.25 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: ADPS-08-2-N
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: ADPS-08-2-N
The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and Pascals allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 0.08" WC (20 Pa) up to 20" WC (5000 Pa). The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases. The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications.
|
|