ETCR6300 AC Leakage Current Clamp Meter Leakage Current Measurement On-line AC Current Measurement with RS232 Interface

Technical Specification
*Function AC leakage measurement, AC current measurement, On-line AC current measurement
*Power Supply 6F22,9V
*Process Type Clamp CT, Integral Approach
*Display Type 4 Digits LCD
*Clamp Size 25mm×30mm
*Meter Dimension LWH: 175mm×70mm×38mm
*LCD Dimension 35mm×21.5mm; Display Dimension: 32mm×15mm
*Sampling Rate 2 Times/Second
*Frequency 50Hz, 60Hz Automatic identification
*Shifting Automatic Shift
*Range :0.001mA～60.00A
*Resolution: 1uA
*Accuracy :±1.5%±5dgt (23℃±3℃, below 70%RH)
*Line voltage : Below AC 600V
*RS232 Interface: With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring
*Data Memory : 99 sets, "FULL" Blinking when memory is full
*Peak Maintaining Peak value capture hold function, press HOLD without Release to display peak value
*Reading Hold Reading hold function: "DH" symbol display
*Overflow display Range overflow function: "OL" symbol display
*Automatic Shutdown :5 minutes after the boot
*Battery Detection :When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement.
*Rated Power : 5mW
*Working Temperature and Humidity: 0℃~40℃; below 80%rh
*Storage Temperature and Humidity :-10℃~60℃; below 70%rh
*Insulation Strength :AC2kV/rms (between core and box)
*Safety Provisions: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT â…¢(600V)
*Accessories Meter: 1 piece, RS232 Com-cable:1 piece; Software Disk: 1 piece;