Supco LTC LOGiT Thermocouple Temperature Data Logger, 3" Length x 2-1/2" Width x 1-3/32" Height

The LTC is a precision instrument for recording the temperature of a thermocouple probe, and the temperature of the internal sensor. The unit can be used with J, K, E, T, R and S type thermocouples. It comes standard with one K-type thermocouple probe. The LTC can store up to 10,750 samples of thermocouple and internal sensor temperatures. Sample point capacity: 10,750 points of thermocouple and ambient temperature. Alarms: Over and under alarms for thermocouple and ambient temperature. Calibration: Factory calibrated. User single point offset calibration is available through software for both thermocouple and ambient temperatures. Logger operating temperature: 32 to 140 degree F (0 to 60 degree C). Storage temperature: -40 to 170 degree F (-40 to 77 degree C). Real time clock accuracy: +/- 100ppm at 75 degree F. Supported thermocouples: J, K, E, T, R, S software selectable. Thermocouple connector: Industry standard miniature universal connector. Supplied probe: 3ft FDA approved K type thermocouple probe. Probe temperature range is -40 to 400 degree F (-40 to 204 degree C). Thermocouple sensor accuracy: Thermocouple wire dependant. The supplied probe accuracy is +/- 4 degree F (2 degree C) or 0.75 percent of reading, whichever is greater. Thermocouple sensor resolution: 0.1 degree F (0.05 degree C). Internal sensor: +/-2 degree F (1 degree C). For full accuracy allow a few. Temperature accuracy: minutes of thermal setting after connecting the thermocouple to the logger. Internal sensor temperature resolution: 0.1 degree F (0.05 degree C). Power source: 9V alkaline or lithium battery (not included). Battery life (average use): 20 Months using alkaline battery. 40 months using lithium battery. Software compatibility: Compatible with logit PC software version 1.20 and above. Measures 3" length by 2-1/2" width by 1-3/32" height, Weight: 2.5 oz (71g). Weight: 2.5 oz (71g). 1 Year warranty.