Data Loggers - Page 23

Manufacturer: DENT Instruments Brand: DENT Instruments Model: TOUC-4G

The SMARTlogger series of instruments are designed to monitor the on-off status and total time of use data. SMARTloggers provide the operating schedule for energy-consuming devices or systems. Models are available for lighting systems, motor loads, or virtually any electric load generating at least .25 amps. Professional installation is not required to use these small, robust loggers. Each one provides powerful data for superior energy management.The new TOUC-4G Contact Logger is an ultra small, battery powered, portable logger used to measure equipment run times for energy audits and volumes from the contact closure outputs from other devices.Incredibly small (6.3 x 3.8 x 1.9 cm (2.5 x 1.5 x .75") comes with integrated earth magnets to hold the units in place. Never needs charging, comes with a built-in battery.

Manufacturer: Orico Brand: Supco Model: SL500XT Color: White

The SL500 series data loggers are simple to use, versatile test instruments which can be used in a multitude of applications.

Manufacturer: ROTRONIC Brand: Rotronic Model: 1510.HL-1D.1.01 Color: Silver

The HL1D is a compact, low cost data logger capable of ±3.0 %RH and ±0.3 °C accuracy. The internal memory can store up to 16,000 data points and includes the HW4-Lite software.

Manufacturer: EISCO Brand: NEULOG Model: NUL231

NeuLog turbidity logger sensor measures the concentration of suspended particles in a solution, and can be used to monitor ecological systems and bacteria or yeast culturing, and test water quality and environmental health for further study. The logger sensor sends a beam of light into a solution, and measures the unreflected light to determine turbidity. Three cuvettes are included to hold solutions. The logger sensor has an experiment duration of 1.0 second to 31.0 days, and 16 bit analog-to-digital converter (ADC) resolution for reading a range of values. The turbidity logger can be used for chemistry, biology, microbiology, environmental, earth science, and biochemistry experiments, and is suitable for grade 3 and higher, or ages 10 to 21. The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficiency, the logger sensor can store up to five experiments in flash memory, and saved experiments can be uploaded to a PC or Mac at any time. Additional accessories, such as USB, Wi-Fi, or battery modules, are required for operation depending on the device (PC, tabl...

Manufacturer: Supco Brand: Supco Model: LTC

The LTC is a precision instrument for recording the temperature of a thermocouple probe, and the temperature of the internal sensor. The unit can be used with J, K, E, T, R and S type thermocouples. It comes standard with one K-type thermocouple probe. The LTC can store up to 10,750 samples of thermocouple and internal sensor temperatures. Sample point capacity: 10,750 points of thermocouple and ambient temperature. Alarms: Over and under alarms for thermocouple and ambient temperature. Calibration: Factory calibrated. User single point offset calibration is available through software for both thermocouple and ambient temperatures. Logger operating temperature: 32 to 140 degree F (0 to 60 degree C). Storage temperature: -40 to 170 degree F (-40 to 77 degree C). Real time clock accuracy: +/- 100ppm at 75 degree F. Supported thermocouples: J, K, E, T, R, S software selectable. Thermocouple connector: Industry standard miniature universal connector. Supplied probe: 3ft FDA approved K type thermocouple probe. Probe temperature range is -40 to 400 degree F (-40 to 204 degree C). Thermocouple sensor accuracy: Thermocouple wire dependant. The supplied probe accuracy is +/- 4 degree F (2 degree C) or 0.75 percent of reading, whichever is greater. Thermocouple sensor resolution: 0.1 degree F (0.05 degree C). Internal sensor: +/-2 degree F (1 degree C). For full accuracy allow a few. Temperature accuracy: minutes of thermal setting after connecting the thermocouple to the logger. Internal sensor temperature resolution: 0.1 degree F (0.05 degree C). Power source: 9V alkaline or lithium battery (not included). Battery life (average use): 20 Months using alkaline battery. 40 months using lithium battery. Software compatibility: Compatible with logit PC software version 1.20 and above. Measures 3" length by 2-1/2" width by 1-3/32" height, Weight: 2.5 oz (71g). Weight: 2.5 oz (71g). 1 Year warranty.

Manufacturer: Onset HOBO Brand: Onset HOBO

Measure temperature, relative humidity, light intensity, and more with the HOBO U12-012. With 12-bit resolution measurements, this data logger gathers a range of recorded data and stores 43,000 measurements. IMPORTANT: This HOBO data logger requires HOBOware software and a communications device. This kit includes the U12-012 Data Logger and USB Cable. Software is Available as a Free Download.

Manufacturer: Dsloger Brand: Dsloger Model: DUS-INS-20A1

Features: - It's used for measuring Carbon Dioxide concentration, temperature, humidity, dew point temperature and wet bulb temperature. - Too much Carbon Dioxide indoor will easy cause tired, not concentration, even cause sick building syndrom. A good indoor environment will be benifit to body health and also improve body immunity, reduce the disease rate. - Carbon Dioxide Meter is widely used in factory, workshop, green house, clean room, industry and agriculture, wine bar, hotel, hospital, shop market, airport, railway station, entertainment hall and movie theater etc. 3.5inch LCD display with backlight. Carbon dioxide (CO2): - Range: 0~9999 ppm - Accuracy: +/- 50ppm - Response time: 10 sec Temperature: - Range: - 10~70 celcius (14~158 fahrenheit) - Resolution: 0.1 celcius - Accuracy: +/- 0.6 celcius/+/-0.9 fahrenheit(0~50 celcius/32~122 fahrenheit), others +/-1.2 celcius Humidity: - Range: 0.1~99.9% - Resolution: 0.1 % - Accuracy: +/- 3%(10~90%) Logging Memory 40000 Operation condition: 0~50 celcius, 0~95% RH Storage condition: 20~60 celcius, 0~99% RH Package Weight : 1000(g) / 35.27(oz) Package Dimensions(Length*Width*High) : 200(mm)*120(mm)*120(mm) / 7.87(in)*4.72(in)*4.72(in) Retail Packaging: Yes, General Box Package Include: 1 x CO2 Carbon Dioxide Air Temperature Humidity DataLogger 1 x USB Cable 1 x AC/DC Power Adapter 1 x Software CD 1 x User Manual

Manufacturer: AZ instrument Corp Brand: AZ instrument Model: AZ8808

PRODUCT SPECIFICATIONS Air temp. range : -20~70 C Air temp. resolution :0.1 C/ F Air temp. accuracy :+/-0.6 C (0~50 C), others +/-1.2 C Humidity. range :0%RH~100%RH Humidity resolution :0.1%RH Humidity accuracy :+/-3%RH (at 25 C, 10~90%RH,others +/-5%RH) Sampling points :16000 Button to on/off:YES USB Interface :YES LCD size (mm):51(H)x63(W) Storage temp.:-20~50 C Storage RH% :Humidity < 90% Dimension(mm):120x93x42 Weight :200G Battery :AA bat.x4pcs or 9V DC adaptor PACKING INFORMATION 1*Meter4*batteries(NOT included for shippment)1*User Manual1*warranty card1*Gift paper box1*software CD1*USB cable

Manufacturer: Monarch Instrument Brand: Monarch Instrument Model: 5396-0525

The Track‐It DC Voltage and Current Data loggers are two channel battery powered stand alone compact data loggers that record up to 32,000 samples each of DC Voltage or Current data. Units are available in 4 DC voltage ranges or for DC current. The unit is easily configured using the included Track‐It Software. Simply plug the logger into an open USB port on your PC and the software automatically identifies the logger. Configure the unit to start and stop recording at a predetermined time and date or only when an alarm condition is sensed.    The sample storage rate can be set from 1 sample every 2 seconds to 1 sample every 24 hours. The on board data storage is non‐volatile so data will not be lost in the event of a depleted battery.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series BDL Button Data Logger records temperatures and humidity in applications where size and cost effectiveness are key. The BDL is housed in a stainless steel case and is water resistant, making it durable in hostile environments where excessive moisture is present. The BDL is self powered and features a USB interface. Sample rate and high/low alarms are user selectable through the Windows®-based application. The included software displays downloaded data graphically with trace and zoom functions. The logger is very small which enables it to be inserted into small items and packages. The Series BDL-K Logger Kit includes 2 buttons, 2 magnets, an interface cable, and a plastic button holder.