HHIP 4101-0011 (M1-) Pin Gage Set (0.061" - 0.250"), No Certificate, 190 Piece

Manufacturer: Forster Products Brand: Forster Products

The Go gauge is used to measure the minimum allowable, safe chamber headspace. If the bolt does not close on a Go gauge, it is considered unsafe. Must have for rechamber jobs to set the new headspace. This gauge ships only in the USA, No export or AP...

Manufacturer: ezMachineTools Brand: ezMachineTools

This M1 Minus type plug pin gage set contains 190 pieces. They are of size 0.061 inch to 0.250 inch. The tolerance is -0.002 inch.

Manufacturer: Westward Brand: Westward

Pin Gage Set, Minus, 50 Pc, Cylindrical, Polished Bearing Steel, Nominal Size (In.) 0.011 to 0.060, Grade Class ZZ, Measuring Range (In.) 0.011 to 0.060, Increments (In.) 0.0010, Tolerance 0.0002, Length (In.) 2, Includes Case

Manufacturer: AR Specialties LLC Brand: AR Specialties LLC

The MIN or GO gauge is used to measure the minimum allowable chamber headspace. If the bolt does not close on a MIN gauge, it is considered unsafe headspace. The NOGO gauge is used to measure the Maximum recommended chamber headspace. If the bolt clo...

Manufacturer: AR Specialties LLC Brand: AR Specialties LLC

Manufacturer: Starrett Brand: Starrett Model: S4000-060

The Starrett S4000 Precision Steel Pin Gage Set is used to determine small hole sizes, for gaging slots, and finding hole distances.

Manufacturer: HFS Brand: HFS

Size: .626-.750" Set qty: 125 Length: 2" Accuracy: +.0000", -.0002" Length: 2" Each Gage increments are in .001" steps

Manufacturer: STAKF Brand: Starrett Model: S4003-250

Precision gage pins are used to determine small hole sizes, for gaging slots, and finding hole distances. Each pin is centerless lapped and is clearly etched with the stated size. This set is supplied in rugged, high impact protective case with each ...

Manufacturer: HHIP Brand: HHIP Model: 4103-0060

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".