Surface Gage - Round Base (Meda Series 238) 6-150"(150mm) Base Diameter, 40"(1000mm) Height

Manufacturer: Vermont Gage Brand: Vermont Gage

For LFC 25.00 mm, class X

Manufacturer: Delmhorst Brand: Delmhorst Model: 496/24

496 contact pins are insulated except at the tips, and measure 2" overall with 1 1/8" penetration. Standard on the 26-ES, and can be used to check wood up to 5" thick.

Manufacturer: Vermont Gage Brand: Vermont Gage

Economical General Purpose Pin Gages Make quick and accurate measurements with Vermont Gage pin gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go/No-Go gaging. Size in micrometers and snap gag...

Manufacturer: VERMONT GAGE Brand: Vermont Gage

Marked with size and direction of tolerance on gages over .060". Within .0001" round. Material: 52100 tool steel Hardness: Rc 60 - 62 Length: 2" Finish: 10µ" or better Certificate of Accuracy included.

Manufacturer: Starrett Brand: Starrett Model: S4004-500

The Starrett S4000 Precision Steel Pin Gage Set is used to determine small hole sizes, for gaging slots, and finding hole distances.

Manufacturer: HHIP Brand: HHIP Model: 4103-0048

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0086

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0075

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".

Manufacturer: HHIP Brand: HHIP Model: 4103-0077

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries. ~ Each pin is individually marked with the size. ~ Fully hardened to 60-62 RC. ~ Finish to 10 Micron or better. ~ Overall length is 2". ~ Tolerance is - .0002".