OMRON H3Y-2 DC24V 10M Solid-state Timer (DPDT)(Supply voltage DC24V) NN

[Operation/resetting system] Time-limit operation/self-resetting
[Time-limit contact] DPDT
(for power switching)
[Supply voltage] 24VDC
[Mounting] Surface/DIN-track mounting(with socket)

Time Ranges
[Rated time] 10 min
[Time setting range] 0.5 to 10 min

Ratings
[Item] H3Y-2
[Rated supply voltage *5 *6] 24VDC *1 *2
[Operating voltage range] All rated voltages except 12 VDC: 85% to 110% of rated supply voltage
12 VDC: 90% to 110% of rated supply voltage *3
[Reset voltage] 10% min. of rated supply voltage *4
[Power consumption] Relay ON: Approx. 1.1 W at 24 VDC
Relay OFF: Approx. 0.1 W at 24 VDC
[Control outputs] H3Y-2: 5 A at 250 VAC, resistive load (cos phi = 1)
The minimum applicable load is 1 mA at 5 VDC (P reference value).
Contact materials: Ag
*1. With DC ratings, single-phase full-wave rectified power sources maybe used.
*2. Only the H3Y-2 and H3Y-2-0 Series include 2-VDC models.
*3. Use the Timer within 90% to 110% of the rated supply voltage (95% to110% for 12 VDC) when using it continuously
under an ambient operating temperature of 50 deg.(C).
*4. Set the reset voltage as follows to ensure proper resetting.
100 to 120 VAC:10 VAC max.
200 to 230 VAC:20 VAC max.
100 to 110 VDC:10 VDC max.
*5. Refer to Safety Precautions for All Times when combining the Timerwith an AC 2-wire proximity sensor.
*6. A diode to prevent reverse voltages is provided only on models witha DC power supply.