Frequency Counters & Pulse Generators - Page 17

Manufacturer: OMRON Brand: Omron

[Rated supply voltage] DC24V [Operating voltage range] 85% to 110% of rated supply voltage [Power consumption] Approx. 1W [Time ranges(Number of ranges)] 7 [Time ranges] 0.1 s to 99.9 s / 1 s to 999 s / 0.1 min to 99.9 min / 1 min to 999 min / 0.1 h to 99.9 h / 1 h to 999 h / 10 h to 9990 h [Select method] Thumbwheel Switch [Output modes] A (Power ON delay) [Control output (Contact output)] Type: Time-limit contact: DPDT Switching capacities (Resistive load): 3 A at 250 VAC Switching capacities (Inductive load): 1 A 250 VAC (cos phi=0.4) / 2.5 A 24 VDC (L/R=7 ms) Minimum applicable load: 10 mA at 5 VDC (failure level: P) [Reset system] Self-reset [Power reset] Reset time: 0.1 s max. [Display method] LCD [Mounting method] Flush mounting / Surface mounting [External connection method] 8-pin round socket [Case color] Light gray (Munsell 5Y7/1) [Weight] Approx. 110g

Manufacturer: Autonics Brand: Autonics USA, Inc

Counter & Timer, 1/16 DIN, 4-Digit, LED, 1 Preset, Relay & NPN Output, 12-24 VDC

Manufacturer: HECON Brand: Hecon

This item is new, including original packaging!

Manufacturer: Omron Brand: Omron

This item is new, including original packaging!

Manufacturer: DURANT Brand: Durant

COUNTER

Manufacturer: Electromatic Brand: Electromatic

This item is brand new, but does not include original packaging!

Manufacturer: Global Specialties Brand: Global Specialties Model: 4010

The model 4010 offers low rise/fall time pulse signals at high rep rate of up to 10MHz to meet today's higher frequency test and measurement applications. The model 4010 features a wide pulse rate (0.1Hz to 10MHz), 8 crystal derived spot frequencies, low rise and fall time (

Manufacturer: TmallTech Brand: DIGITEN

Features High-speed IC,bright red LED,easy to install. Good stability, strong Anti-interference. Counting value be retained when power failure. Widely use in Automatic Burden System,Winding Machine,packaging machinery,textile machinery,ect. The meter retain the number automatically when power cut off. Specifications: Power supply:DC12V DC Current:30mA Sign:Pusle signal,NPN 3 wires normally closed trigger mode: rising edge Display dimension: 0.56" RED Reset signal:Pulse or switch Counting:Plus or minus Response frequency: 100HZ Display range:0-9999 Panel cutout dimension:76.5mm*39.2mm Overall dimension: 79mm*43mm*30.5mm Sensor dimention: M12x10x55mm. Detection range: 10mm Detected objects: magnet Sensor appearance:M12mm cylinder. Sensor wiring:brown---Power+;blue---Power-;black---signal. Operating temperature: 0 to 50¡ãC. Packaging include 4 Digit blue counter x 1 Hall proximity sensor x 1(come with magnet) 4 wires cable x 1 2 wires cable x 1 Instruction x 1

Manufacturer: General-Electric Brand: GE

This item is brand new, but does not include original packaging!

Manufacturer: OMRON Brand: Omron

[Operation/resetting system] Time-limit operation/self-resetting [Time-limit contact] DPDT (for power switching) [Supply voltage] 24VDC [Mounting] Surface/DIN-track mounting(with socket) Time Ranges [Rated time] 10 min [Time setting range] 0.5 to 10 min Ratings [Item] H3Y-2 [Rated supply voltage *5 *6] 24VDC *1 *2 [Operating voltage range] All rated voltages except 12 VDC: 85% to 110% of rated supply voltage 12 VDC: 90% to 110% of rated supply voltage *3 [Reset voltage] 10% min. of rated supply voltage *4 [Power consumption] Relay ON: Approx. 1.1 W at 24 VDC Relay OFF: Approx. 0.1 W at 24 VDC [Control outputs] H3Y-2: 5 A at 250 VAC, resistive load (cos phi = 1) The minimum applicable load is 1 mA at 5 VDC (P reference value). Contact materials: Ag *1. With DC ratings, single-phase full-wave rectified power sources maybe used. *2. Only the H3Y-2 and H3Y-2-0 Series include 2-VDC models. *3. Use the Timer within 90% to 110% of the rated supply voltage (95% to110% for 12 VDC) when using it continuously under an ambient operating temperature of 50 deg.(C). *4. Set the reset voltage as follows to ensure proper resetting. 100 to 120 VAC:10 VAC max. 200 to 230 VAC:20 VAC max. 100 to 110 VDC:10 VDC max. *5. Refer to Safety Precautions for All Times when combining the Timerwith an AC 2-wire proximity sensor. *6. A diode to prevent reverse voltages is provided only on models witha DC power supply.