Frequency Counters & Pulse Generators - Page 11

Manufacturer: OMRON Brand: Omron

[Rated supply voltage] 24VDC If power supply incorporates a single-phase full-wave rectifier. [Operating voltage range] 85% to 110% of rated supply voltage [Power consumption (Relay ON)] 1.1W [Power consumption (Relay OFF)] 0.1W [Reset voltage] 10% max. of rated supply voltage [Number of time ranges] 1 [Time ranges] 5s to 120s [Operating mode] Power ON-delay [Control output (Type)] Time-limit: DPDT [Control output (Contact output)] Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A Minimum applicable load: 1 mA at 5 VDC (failure level: P) [Operating resetting] Time-limit operation/Self-reset [Weight (Main)] Approx. 50 g [External connection method] Plug-in terminal [Case color] Munsell 5Y7/1 (Light gray)

Manufacturer: OMRON Brand: Omron

[Model]Long-time range model(0.1 min to 10h) [Time-limit contact]DPDT [Supply voltage],200 to 230VAC [Item]H3YN-21 [Rated supply voltage]100 to 120VAC,200 to 230VAC(50/60Hz) Note: 1. Sockets and Hold-down Clips are not included with the H3YN. They must be ordered separately. 2. Only models with 24-VDC power supply are available. [Time ranges] 0.1 min to 10h (1min, 10min, 1h, 10h max. selectable) [Rated supply voltage *4 *5] 100 to 120VAC, 200 to 230VAC (50/60Hz) *1 [Pin type] Plug-in [Operating mode] On-delay, interval, flicker OFF start (selectable with DIP switch) [Operating voltage range] 85% to 110% of rated supply voltage (12 VDC: 90% to 110% of rated supply voltage) *2 [Reset voltage] 10% min. of rated supply voltage *3 [Power consumption] 100 to 120VAC: Relay ON: Approx. 1.8VA(1.6W) at 120VAC, 60Hz Relay OFF: Approx. 1VA(0.6W) at 120VAC, 60Hz [Control outputs] 5 A at 250 VAC, resistive load (cos phi = 1) The minimum applicable load is 1 mA at 5 VDC (P reference value). Contact materials: Ag *1. Do not use the output from an inverter as the power supply. Refer to Safety Precautions for All Times for details. *2. When using the H3YN continuously in any place where the ambient temperatureis in a range of 45 deg.(C) to 50 deg.(C), supply 90% to 110% of the rated supply voltages (supply 95% to 110% with 12 VDC type). *3. Set the reset voltage as follows to ensure proper resetting. 100 to 120 VAC: 10 VAC max. 200 to 230 VAC: 20 VAC max. 100 to 110 VDC: 10 VDC max. *4. Refer to Safety Precautions for All Timers when combining the Timerwith an AC 2-wire proximity sensor. *5. A diode to prevent reverse voltages is provided only on models witha DC power supply.

Manufacturer: Autonics Brand: Autonics USA, Inc

Timer, Digital, 1/16 DIN, On-Delay, Multi-Range, DPDT, 24-240 VAC (socket req'd)

Manufacturer: Omron Brand: Omron

This item is used and in working condition.

Manufacturer: TekcoPlus LTD Brand: TekcoPlus

Frequency counter that measures signals over a wide range of 0.01Hz - 2.4GHz. Gate time that is continuously varying from 100ms-10s. All functions depend on a single CPU. It has a crystal-controlled temperature circuit that provides a constant compensation for temperature change, reduces the measurement errors. Features * Switch from 110V /220V (vise versa) * 5W max consumption Specifications 8digit LED display 3step function selections Channel B input has an attenuator(x1,x20) AC/DC coupling for low-pass filter 2 Input Channels: Channel A for 0.01Hz-50MHz ; Channel B for 50MHz-2.4GHz Channel A (0.01Hz to 50 MHz) * Freq range: DC couple 0.01-100Hz ; AC couple 100Hz-50MHz * Sensitivity: "DC" 0.01-1Hz = 500m Vp-p, 1-100Hz = 80m Vrms, "AC" 100Hz - 50mHz = 80m Vrms * Input impedance: 1 M? Channel B (50MHz - 2.4GHz) * Freq: 50MHz - 2.4GHz * Sensitivity: 50MHz-1.2GHz = 80m Vrms, 1.2-2.4GHz > 80m Vrms * Coupling: AC only * Input Impedance: 50? Resolution depends on gate time control setting Time base: * Short time stability: ±3 x 10-9/sec * Long time stability: ±2 x 10-8/month * Temp drift coefficient: ±1 x 10-7, 10-40°C * Line voltage variation: ±1 x 10-7 for line voltage ±10% Gate Time: Continuously variable from 100ms - 10s Precision: standard time error (t) x frequency (f) ±1d Power: 110V/220V Preheat time: 20min Operating environment: 0-50°C, 10-90%RH Size and Weight: 270 x 215 x 100mm, approx. 1.6kg Set includes 1 x Frequency Counter 1 x Power Cord English User Manual Test probe w/ BNC connector

Manufacturer: Cramer Brand: Cramer

This item is new, including original packaging!

Manufacturer: Saia Brand: SAIA

This item is used and in working condition.

Manufacturer: Simpson Brand: Simpson

This item is new, including original packaging!

Manufacturer: Danaher Brand: Danaher

This item is new, including original packaging!

Manufacturer: Autonics Brand: Autonics USA, Inc

Timer, Year/Weekly, W72xH72mm, LCD, 3 operation modes, Year 24 / Week 48 Steps, 2 SPDT Outputs, 100-240 VAC