Frequency Counters & Pulse Generators - Page 28

Manufacturer: Cutler-Hammer Brand: Cutler-Hammer

This item is brand new!

Manufacturer: BCX Utra Brand: BCX ULTRA Model: BT-HFPCM2 Color: Black

Double Bubble Tube that connects to BCX Ultra. The number one reason people use this device is that they are hands free and is perfect for use while sleeping or running on multiple people. This device runs all of our built in prestored programs, sweeping programs and Rife's original frequencies since it runs the full range of BCX Ultra frequencies and carrier wave. Another reason is because of it is power, 150 watts!

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 1823A

The 1823A and 1856D are reciprocal 2.4 GHz and 3.5 GHz frequency counters that are microprocessor controlled. Their LED displays can provide up to nine digits of resolution using an external time base with a 10 s gate time. The high accuracy, sensitivity, and versatility of these counters make them an extremely valuable instrument to scientists, engineers, and communications technicians for a broad spectrum of laboratory and service applications.

Manufacturer: IBQ Brand: IBQ Model: IBQ102 Color: Black

This portable frequency counter is designed for counting continuous wave signal comes from Two-way Radio. Its three-button control is easy to use and its small size allows you to carry it anywhere you like. Features * RF signal strength (50MHz-2.6GHz) * Display Screen Holding * 50 Display Readings Saving * Auto switch off, Auto backlight * Battery Indicator Specifications * Range: 10Hz-100MHz 50MHz-2.6GHz * Amplifier: 1 Meg ohm 50ohm * Impedance: 1 Meg ohm 50ohm        30pF VSWR

Manufacturer: Sparkfun Electronics Brand: SparkFun

Description: This new revision includes a JST cable and also fixes the TX/RX swap from the last revision. Now you can use an FTDI correctly. We are also including a 16-pin header instead of a 40-pin header (only 16 pins are necessary).This kit is a re-hash of Nuxie's FunCount frequency counting kit. It includes everything you need to build a frequency counter capable of measuring frequencies from 1Hz to over 6MHz. The measured frequency is displayed on a 16×2 black on green LCD.Our new design is based on the popular ATmega328. The ATmega comes pre-programmed with both the frequency counting firmware, and a serial bootloader, so you can program it as you would an Arduino. If you want to program it via Arduino, you'll need a FTDI Basic Breakout. Unused pins of the ATmega328 are broken out for all your custom firmware desires.The ATmega328 runs at 16MHz, and should be able to reliably count frequencies up to around 6.4MHz (assuming a 50% duty cycle). Voltage supplied to the kit should be 5VDC. The voltage input on the frequency pin should not exceed the supplied voltage, and should not go below 0V.The kit includes a 3-pin JST male connector, so you can use this wire to deliver +5V, ground and the frequency signal to the Counter. You'll also be able to piggy-back the counter onto our Function Generator Kit.

Manufacturer: Tekpower Brand: Tekpower Model: MS6100

Specifications: 1. Frequency Measurement: Channel A: 10MHz 10 Hz to 10MHz Resolution: 1/10/100Hz selectable 100MHz 10MHz to 100 MHz Resolution: 10/100/1,000Hz Selectable Channel B: 1,300 MHz 100MHz to 1,300 MHz: Resolution: 100Hz, 1KHz and 10 KHz selectable. 2. Period Measurement Channel A ( Only): 0.1S to 0.1uS ( 10Hz to 10MHz), resolution: 0.0us,0.00uS,0.000uS selectable. 3. Total measurement: Channel A (Only): 10Hz to 10 MHz Resolution: 1 count input Size: 300mm(L)X260mm(W)X74mm(H) Weight: Approx. 1,850g Accessories:1 piece Power Cord, 1 piece Cable.

Manufacturer: DIGITEN Brand: DIGITEN

Features Count the number people who pass through this system. When people pass this system,Infrared receiver output to counter. Range is less than 20m,and range can be reduced to 30% in bad weather conditions:fog,rain,dust,dust,etc. The beam signal is strong with 1m,best mounting distance is 1-3 m.vertically mounting and level match. Good stability, strong Anti-interference. Counting value be retained when power failure. Application:store,office,enter/exit of gate,etc. Specifications: Power requirement:DC12V Counter working mode:momentary LED dimension: 0.56 inch RED Display range:0-9999 Counter mounting panel dimension:100mm*70mm Transmitter and receiver dimension:49.2*76*21.6mm Packaging include 4 digital counter x 1(include wire) Counting mounting panel x 1 Infrared sensors(transmitter and receiver) x 1 Parts include Screws,M3 brass pillar,etc. Instruction x 1

Manufacturer: Prism Gaming Brand: TruLok Counter

Designed for all of today's top trading card games, this life counter is designed to track both yours AND your opponents life! Self contained, cut high impact plastic, this hit counter is numbered from 1-40 and works WITHOUT having to disassemble and "flip" any pieces for functionality.This model has the TruLok gear inside allowing you to actually "click" from one number to the next. Avoid unnecessary mistakes with this advanced life counter!

Manufacturer: Sinometer Brand: Mastech

MS6100 bench frequency counter comes with an AC power cable, test cable and instructions. This multi-function meter gives you a higher accuracy on Frequency and Period of a signal. Compliance with IEC 1010-1 standard. The system is brand new in the original box and comes with an excellent one year warranty. It is manufactured by MASTECH which is one of the world's largest manufacturers of test equipment. The frequency counter has two BNC inputs for the following frequency ranges: 10Hz to 100 MHz and 100 MHz to 1.3 GHz.