Anemometers - Page 19

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540624

Fluke voltage test probe for 1760 3 phase power quality recorder. Range Rms: 1 V to 170 V. Vnom: 100 V. Maximum continue: 1000 V. Fast transient range: Vp less than 1ms: 6000. Intrinsic error: greater than 0.15 percent. Operating voltage: 600 V CAT IV.

Manufacturer: Fluke Corporation Brand: Fluke Model: 28II Color: Multicolored

The Fluke 28II Rugged Industrial Multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The 28II meter has an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15-Degree C to +55-Degree C (5-Degree F to 131-Degree F, -40-Degree C for up to 20 minutes) and 95-Percent humidity, and have been designed and tested to withstand a 3 m (10 ft.) drop. The Fluke 28II multimeter is built to work in the toughest environments. Measures up to 1000 V ac and dc, measures up to 10 A (20 A for 30 seconds), has a 10,000 μF capacitance range and a frequency to 200 kHz. Features an extended ac voltage bandwidth of 15 Hz to 20 kHz. Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. The multimeter is designed to perform resistance, continuity and diode tests and has a min/max and average recording to capture variations automatically. Features a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. The 28II’s hi resolution 20,000 count display mode allows for more accuracy. Backlit keypad buttons allow for easy visibility in lowlit areas while large display digits and 2 level bright white backlight increase visibility.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3345753

Fluke 1 phase mini current clamp set for power quality logger. 1A/10A Current.

Manufacturer: Gowegroup Brand: Gowegroup

Please see more specifications on the pictures, Don't buy others' fakes. Only buy from Gowe Industrial can enjoy after-care service.

Manufacturer: Testo AG Brand: Testo Model: 0560 4160

The Testo 416 anemometer with telescoping mini-vane probe reaches into ducts to measure air velocity in m/s and fpm and air temperature in degrees C and F; calculates air flow volume in m3/h and cfm; and has hold, maximum, minimum, and mean functions for analyzing air flow. Hold function freezes a reading on the display to aid documentation, and the maximum and minimum functions display highest and lowest readings since the meter was powered on or reset. The mean function can perform a timed mean calculation that displays an average reading over time as well as a multi-point mean calculation that displays the average of recorded readings. The meter includes a calibration certificate. The LCD shows air velocity and temperature measurement simultaneously and a backlight provides visibility in low light. The unit has an auto-off mode that shuts it down after 10 minutes of non-use to conserve battery life and has a low-battery indicator. This anemometer is used for monitoring air flow and temperature in ductwork, spray booths, and exhaust hoods, among other applications. SpecificationsAir velocity range0.6 to 40 m/s; 118 to 8,000 fpmAir velocity resolution0.1 m/s; 0.1 fpmAir velocity accuracy+ or - (1.5% of reading + 0.2 m/s, 40 fpm)Air flow volume unitsm3/h, cfmAir temperature range0 to 60 degrees C/32 to 140 degrees FOperating temperature-20 to +50 degrees C/-4 to +122 degrees FPower(1) 9V battery (included)Vane diameter16 mm/0.63"Main unit dimensions (H x W x D)7 x 2.5 x 1.6 inchesWeight11.5 oz.H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other propertie...

Manufacturer: Fluke Corporation Brand: Fluke Model: I5S

Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5A AC current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers. Compact shape makes transporting and storing convenient. Take accurate readings without breaking the circuit. CAT III 600 V (For insulated conductors only). Nominal current range: 5A. Continuous current range: 10mA to 6A. Maximum non-destructive current: 70A. Lowest measurable current: 10mA. Basic accuracy: 10mA to 1A: 1 percent + 5 mA, 1A to 5A: 1 percent. Useable frequency: 40 Hz to 5 kHz. Output levels: 400 mV/A. Input load impedance: greater than 1 mega ohm in parallel with up to 47 pF. Crest factor: less than or equal to 3, add 0.7 percent to accuracy. Safety: CAT III 600V per IEC/EN61010-1, Pollution Degree 2. Maximum voltage: 600V AC. Maximum conductor diameter: 15mm. Output cable length: 2.5m. With BNC adapter. Measures 116mm length by 43mm width by 23mm height.

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-1625

The Fluke clip-on current transformer clamp set is used to perform selective or stakeless testing with the Fluke 1625 earth ground tester. Selective testing uses one clamp and stakes to measure earth ground loop resistance values for one ground electrode. Stakeless testing uses two clamps to test ground loop resistance. Both the selective and stakeless methods eliminate the need to disconnect the electrode from the grounding system for increased safety and fewer testing steps. One clamp is voltage inducing, and the other clamp is current sensing. Both clamps have a 50.8mm/2" inside diameter. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700RG31

The 700G Series Pressure Gauges (the Product) are high-accuracy digital pressure test gauges.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX C3002

The CNX C3002 Modular DMM 2-Compartment Soft Case is as versatile as the CNX wireless test tool team. This carrying case can work alone, holding the CNX Wireless Multimeter and test leads, or can be attached to the CNX C3000 Premium Modular Tool Bag. Your CNX tools are always within easy reach, ready for testing.

Manufacturer: COLE-PARMER Brand: Dwyer

Hemispherical tips - almost impossible to damage Air velocity calculator Portable or stationary fixed mounting types Direct reading velocity charts Standard 5/16" diameter pitot tubes Recommended for ducts 10" and larger in diameter Plainly inscribed inch graduations on both sides show depth of insertion at a glance - this helps you find the exact center of any duct and make an accurate traverse quickly Tubes comply with AMCA & ASHRAE specifications Test-confirmed unity coefficients Life-time construction of #304 stainless steel Suitable for use in temperatures up to 1500°F Accurate readings when tip is directed within 15° of air flow Static connection extends 3-1/2" to serve as guide for directing tip Swaged tip, silver soldered connections Seven sizes from 8" to 60" long Pocket-size 1/8" diameter pitot tubes Recommended for ducts 4" and larger in diameter Geometrically scaled down per AMCA code Unity coefficient design Springy, #304 stainless steel withstands flexing without damage Resists temperatures up to 800°F Extended static connection serves as a guide for directing tip into air stream Suitable for permanent mounting and OEM applications Four models - 6" or 12" lengths in standard or short tip styles