|
|
-
3.6 of 5.0 with 33 Reviews
SALE PRICE: $146.31 3% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3530819
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3530819
|
The Fluke 810T noncontact tachometer attachment measures from 6 to 99,999rpm with accuracy to +/-0.05%, uses a laser beam, and has a 50cm cable. This noncontact tachometer is for with the Fluke 810 vibration tester, to measure the speed of motors, conveyor belts, and other moving and rotational systems. It measures from 6 to 99,999rpm with accuracy to + or - 0.05 percent. Its optical sensor is a laser beam that works at a distance of 1 to 100cm for user safety. Its integral 50cm cable connects the tachometer to the vibration tester for power and measurement data recording. It carries the CE mark to indicate compliance with applicable EU directives. This tachometer is suitable for measuring rotational speed in conjunction with vibration testing in mechanical or industrial engineering environments.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for measuring shafts with a central hole or flat end surfaces, and rotary wheels for measuring conveyor belts. Noncontact tachometers take measurements from a distance using a beam of infrared light, and provide highly accurate measurements. Contact tachometers are an excellent choice for dirty and dusty environments; noncontact tachometers only calculate rpm but are considered safer because they do not require the operator to be in close contact with the moving surface. Contact/noncontact tachometers, also known as dual, or combination tachometers, can be used to take contact and noncontact measurements. Some tachometers can also take other types of measurements, such as count or frequency, while others can output data to a computer for analysis. Tachometers are used in applications such as automobile maintenance, mechanica...
-
3.6 of 5.0 with 18 Reviews
SALE PRICE: $158.09 21% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PT12
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PT12
Pitot tube for 922 airflow meter. Pressure sensitive to aid in measurement and data gathering. 12" Length.
-
3.6 of 5.0 with 30 Reviews
SALE PRICE: $179.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3530837
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3530837
Fluke quick disconnect cable.
-
3.6 of 5.0 with 3 Reviews
SALE PRICE: $185.50
Manufacturer: CAS
Brand: CAS
Model: SW-1D(5)
Manufacturer: CAS
Brand: CAS
Model: SW-1D(5)
Compact in design and easy to use portion control scale for use in a variety of applications. AC or battery operated Legal for trade (SW Only). Use in restaurants, specialty stores, farmer's markets and more.
-
3.6 of 5.0 with 15 Reviews
SALE PRICE: $197.50 2% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS510-R
Color: Red
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS510-R
Color: Red
ScopeMeter Compact Probe for electronic applications, red, 10:1, 500 MHz, 300 V CAT III.
-
3.6 of 5.0 with 14 Reviews
SALE PRICE: $210.00
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 731A
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 731A
|
The B&K Precision 731A digital anemometer with vane probe measures air velocity in m/s, fpm, knots, mph, and km/h and air temperature in degrees C and F; and has record, multi-point average, and data hold functions for analyzing air flow. Record function captures readings over a period of two seconds and displays minimum, maximum, and average values. Readings can also be averaged over a period of 16 seconds. Multi-point average function displays the average reading of up to eight recorded readings. Data hold function freezes a reading on the display to aid documentation. The LCD shows velocity and temperature readings simultaneously and a backlight provides visibility in low light. The vane probe attaches to the meter via 2 m of coiled cable for reaching into ductwork. The meter has an auto power-off mode that shuts it down after 10 minutes of non-use to conserve battery life. It has European Conformity (CE) marking. This anemometer is used for monitoring air flow and temperature in ductwork, spray booths, and exhaust hoods, among other applications. SpecificationsAir velocity range0.0 to 30.0 m/s; 0.0 to 5,900 fpm; 0.0 to 5,800 knots; 0.0 to 67.0 mph; 0.0 to 108.0 km/hAir velocity resolution0.01 m/s; 1 fpm; 0.1 knots; 0.1 mph; 0.1 km/hAir velocity accuracy+ or - 3% of full scaleAir temperature range-20 to +60 degrees C/-4 to +140 degrees FOperating environment0 to 50 degrees C at less than 75% relative humidityPower(1) 9V battery (included)Main unit dimensions (H x W x D)770 x 65.5 x 35 mmWeight390 gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Anemometers, also called wind meters, measure air velocity and are most commonly used for weather monitoring to determine wind speed and for HVAC applications to determine air flow within ducts. In addition to air velocity, anemometers may measure wind direction, air pressure, air flow volume, air temperature, humidity, light, and other pr...
-
3.6 of 5.0 with 19 Reviews
SALE PRICE: $212.50
Manufacturer: Ohaus
Brand: Ohaus
Model: 30240974
Manufacturer: Ohaus
Brand: Ohaus
Model: 30240974
The newest addition to the Ohaus starter series of electrochemistry instruments includes Electrodes that support advanced ph measurements.
-
3.6 of 5.0 with 28 Reviews
SALE PRICE: $224.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: STL90
Manufacturer: Fluke Corporation
Brand: Fluke
Model: STL90
Industrial shielded, 1:1, silicone insulated test lead set. Useful bandwidth 1 MHz. Silicone insulated leads won't crack from cold or melt from accidental contact with hot surfaces. Superior strain relief and flexibility provide extra long life. Compatible with Fluke ScopeMeter test tools shielded test lead set contains of: two shielded test leads: cable length: 1.5 m, safety designed shrouded banana input, safety designed insulated BNC connector, maximum signal voltage: 300 V, maximum voltage to ground: 600 V per IEC 1010-2-031 CAT III, maximum current 3 A Two ground leads: cable length: 250 mm, maximum current 3 A, safety designed shrouded banana jacks Two 4 mm tip adapters, 30 V. Two 2 mm tip adapters, 30 V. Three backprobe pins, 30 V, 1 A. Two insulated alligator clips (AC85A). One year warranty. UL Listed.
-
3.6 of 5.0 with 7 Reviews
SALE PRICE: $224.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS420-R
Manufacturer: Fluke Corporation
Brand: Fluke
Model: VPS420-R
Voltage probe set for Fluke ScopeMeter 190 Series II. Ruggedized high working voltage probe. 100:1 attenuation value. 150 MHz bandwidth. 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV. Red/black color.
-
3.6 of 5.0 with 7 Reviews
SALE PRICE: $269.99 3% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-71X-TRAP
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-71X-TRAP
FLUKE FLUKE-71X-TRAP LIQUID & DIRT TRAP, PRESSURE CALIBRATOR
|
|