Data Loggers - Page 12

Manufacturer: Neulog Brand: NEULOG

NUL248 Neulog mA Current logger sensor module is used to measure the current in the mA range, in parallel or series branches of low voltage AC and DC circuits and also to investigate the dependence of the current flow through components on the voltage across them. Includes red (positive probe) and black (negative probe) wires connected directly to the sensor's body. The wires are attached to 4 mm red and black plugs. With its 4 mm plugs it can easily be connected into electric circuits. Specifications: Range and operation modes +/- 250mA, ADC resolution 15 bit, Accuracy 1%, Resolution 0.1 mA, Maximum sample rate (S/sec) 3,000 short duration. This logger sensor can be use on ipads, tablets, PCs, and Macs (devices sold separately). "Required accessories-To use sensors you will need either: a USB Module (USB 200) to connect via USB cable to PC or Mac, or a Wi-Fi Module (WIFI201) and battery (BAT200) to connect to any Wi-Fi enabled device (Smart Phone, Tablet, Computer)" The module is suitable for grade 3 and higher, or ages 10 to 21. Measurements with NeuLog sensors can be performed through any device which uses the Wi-Fi technology, such as iPads and Tablets with Android, PC computers with Windows / Linux or Macintosh with OS. These can all communicate with the Wi-Fi adaptor to begin a unique experience of data acquisition. There is no need for any application download or software installation to take advantage of all the power of NeuLog sensors through the wifi module.

Manufacturer: Sensirion Brand: SHT71 Model: SHT71

Digital temp./humidity sensor

Manufacturer: Onset Computer Brand: Onset HOBO

This miniature data logger can record temperature and relative light levels. Complete with waterproof casing, this product is designed for indoor, outdoor, and underwater deployment. This model can store approximately 52,000 measurments of 10-bit readings.

Manufacturer: Wellzion Brand: Fristaden Lab

This portable Data Logger, sold by Fristaden Lab, automatically measures and stores humidity and temperature data. The USB interface allows for easy set up and data downloads to Windows PCs, where the data can be reviewed, analyzed and exported to other file formats (inc. txt, xls, cvs, bmp and jpg). This Data Logger features a LCD display, as well as flashing LED status, alarm and low battery indications. It includes a replaceable lithium battery, which can last up to three years. The data is will not be deleted if the battery dies. A One Year Manufacturer Warranty is also included. Specifications: Model: SSN-23 Relative Humidity: Measurement Range: 0-100%RH Accuracy (Typ.): ±2%RH Resolution (Typ.): 0.1%RH Temperature: Measurement Range: -35 to 80°C(-31 to 176°F) Accuracy (Typ,): ±0.3°C(±0.5°F) Resolution (Typ.): 0.1°C(0.2°F) Sensor Location: Internal Memory Capacity: 64KBytes (Total 32,000 Readings for All Channels) Sample Rate: 10 Seconds - 24 Hours PC Software: Dgraph, USB Drive Required Power Supply: Replaceable 1/2AA 3.6V Lithium Battery, 1200mAh Battery Life: Approx. 3 Years with 1 Minute Sample Rate Unit Dimensions: 120mm x 37mm x 23mm Trusted Retailer Fristaden Lab Portable Temperature and Humidity Data Logger, High Accuracy, 32,000 Readings, USB Interface, LCD Display, 1 Year Warranty is sold by Fristaden Lab, an American-brand lab and scientific equipment retailer established in 2013 in Chicago, Illinois. Fristaden Lab is owned and operated by Fristaden & Company, LLC.

Manufacturer: Onset Computer Brand: Onset HOBO Model: UX90-004

The HOBO Motor On/Off data logger records motor on and off conditions within an AC magnetic field with its internal sensor, or mechanical contact closures from external sensing devices. This logger is ideal for tracking the usage & runtimes of motors, pumps, compressors, and other equipment. The HOBO UX90-004 Motor On/Off Logger is available in a standard 128 KB memory model (UX90-004) capable of 84,650 measurements and an expanded 512KB memory version (UX90-004M) capable of over 346,795 measurements.

Manufacturer: Supco Brand: Supco Model: L420

The L420 data logger is a precision instrument for recording the current in a 4 - 20 ma loop. The logger can store up to 21,500 data points. Sample point capacity: 21,500 points. Alarms: Over and under. Calibration: Factory calibrated. User single point offset calibration is available through software. Operating temperature: 32 to 140 degree F (0 to 60 degree C) using alkaline battery, -40 to 150 degree F (-40 to 65 degree C) using lithium battery. Time accuracy: +/-100ppm at 75 degree F. Relative humidity range: 0 to 95 percent RH non condensing. Input current range: 0ma - 40ma. Current resolution: 0.01ma. Current accuracy: +/- 0.05 ma. Power source: 9V alkaline or lithium battery. Battery life (average use): 20 months using alkaline battery, 40 months using lithium battery. Measures 3" length by 2-1/2" width by 1-3/32" height, Weight: 2.5 oz (200g). 1 year warranty.

Manufacturer: Graphtec Brand: Graphtec Model: GS-DPA

Dual port adapter, Allows multiple sensors or modules

Manufacturer: FLIR Commercial Systems Brand: Extech

Monitors humidity, temperature and air pressure levels in clean rooms, warehouses, storage rooms, freezers, shipping vans, and water damage restoration. USB connector easily plugs into a computer for data analysis. Datalogs up to 10,000 readings with a user programmable sample rate. Other features include selectable data sampling rate from 1 minute to 18 hours, user-programmable Min/Max alarm thresholds, manual and programmable start modes, and status indication via red/yellow LED and green LED. Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar. Complete with 3.6V Lithium battery, mounting bracket, and Windows(R) compatible analysis software.

Manufacturer: MadgeTech Brand: MadgeTech

The Process101A-20mA is one of MadgeTech's newest data loggers. It is part of a new series of low cost, state-of-the-art data logging devices. MadgeTech has taken the lead in offering the most advanced, low cost, battery powered data loggers in the world today. The Process101A is available in a range of 0 to 20mA. The device offers a 10 year battery life, a 1 second reading rate, a multiple start/stop function, ultra-high speed download capability, 1 million reading storage capacity, optional memory wrap, battery life indicator, optional password protection, programmable high-low alarms and more. The Process101A is priced at $179 each and can be delivered from stock now. Our research has shown that the Process101A is second to no other data logger when it comes to price and performance. Using the MadgeTech software, starting, stopping and downloading from the Process101A is simple and easy. Graphical, tabular and summary data is provided for analysis and data can be viewed in a, ma or µa. The data can also be automatically exported to excel for further calculations. As the leader in low power data logger technology, MadgeTech continuously improves its products and develops solutions to meet ever-changing challenges. The Process101A was designed with our customers in mind. Madgetech offers free firmware upgrades for the life of the product so that data loggers already deployed in the field can grow with new technological developments. Units do not need to be returned to the factory for upgrades. The user can do this automatically from any PC. The Process101A is available with an extended warranty. Software features: multiple graph overlay, statistics, digital calibration, zoom in/zoom out, full time zone support, data annotation, min./max./average lines, data table view, automatic report generation, summary view, multilingual.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Model DW-USB-1-HT High Temperature USB Data Logger allows users to monitor temperatures up to 257°F (125°C). The rigid, stainless steel enclosure protects the sensor against corrosion, impact, and water ingress. With the easy to install Windows® based software, parameters can be configured to work in many applications. Data can be downloaded by plugging the data logger directly into a PC's USB port, with no cable required. Downloaded data can then be graphed, printed, or exported to other spreadsheet applications.