Data Loggers - Page 36

Manufacturer: DeltaTrak Brand: DeltaTrak

The ThermoTrace Waterproof Infrared Thermometer, Model 15006 , is ideal in many environments because of its sturdy, waterproof construction. Use this infrared thermometer to quickly check surface temperatures of products in hard to reach areas such as inside refrigerated cases or other cold storage areas, or check food at salad bars and hot buffets. Instant non-contact surface temperature measurement Useful with moving products or for hard to reach places Completely waterproof (IP67 compliant) Two measuring modes: normal and continuous Alarm settings for high and low temperature limits Memory function holds up to 99 points of temperature data

Manufacturer: FLIR Systems Brand: Extech Model: SDL200

Records data on an SD card in Excel® format. 4-Channel datalogging with 6 Thermocouple types (J, K, E, T, R,S) and 2-Channel datalogging with RTD (Pt100Ohm) probes. Displays [T1, T2, T3, T4] or differential [T1-T2] reading. Offset adjustment used for zero function to make relative measurements. Stores 99 readings manually and 20M readings via 2G SD card. Records readings with real date and time stamp. User programmable sampling rate: 1 to 3600 seconds. Min/Max, Data Hold, Auto Power Off. Built-in PC interface. Complete with 6 AA batteries, four general purpose Type K bead wire temperature probes, SD card, and hard carrying case

Manufacturer: Lascar Brand: Lascar Electronics Model: EL-USB-1 Color: Black

The EL-USB-1 is a USB temperature data logger with a measurement range of -35 to +80°C (-31 to +176°­­F). The data logger can store up to 16, 382 readings and is supplied with a long-life replaceable lithium battery, allowing the unit to log data continually for at least one year (depending on logging rate and temperature). The status of EL-USB-1 is indicated by flashing red, green and orange LEDs. The data logger is protected against moisture to IP67 standard when the protective cap is fitted.

Manufacturer: Testo AG Brand: Testo Model: 0572 1560

Testo 174 data loggers offer easy data collection, dual mode readout, USB interface, and SD card. ideal for equipment commissioning and troubleshooting. Inexpensive to install in multiple locations so you can perform a complete analysis. Record measurement values, max/min, date, time. All data saved, regardless of battery condition. Long-term and multi-channel temperature and humidity measurement. Channels: 1 x internal. Measuring range: -22 degree to 158 degree F (-30 degree to 70 degree C). Battery life (at 77 degree F): 500 days at 15 minimum measurement rate. Operating temperature: 22 degree to 158 degree F (-30 degree to 70 degree C). Battery type: 2 x CR 2032 Lithium. Measuring Cycle: 1 min - 24 hr. Memory: 16,000 readings. Measures 1-1/2" length by 51/64" width by 2-19/64" height.

Manufacturer: Reed Brand: Reed Instruments Model: BS-6

The REED BS-6 Tripod can be used with many of Reed Instruments meters. Mount your meter on the tripod for hands free operation.

Manufacturer: Sensonics Brand: SENONICS

The Minnow-T is a portable, battery operated temperature data logger able to store 65,520 samples of temperature along with a time stamp. The Minnow runs off a CR2450 coin cell battery that enables it to run for over 4 years while logging. The Minnow is also has a real time logging mode that allows it to display data on the PC or Mac as it happens. A free PC or Mac application is provided with the Minnow logger and communications are made via a micro-B USB connector on the side of the unit. The application is used for configuration, data extraction and analysis. The circuit assembly is conformal-coated to protect the electronics from wet and condensing environments. Features: 65,520 samples of two channels High and Low alarms for both sensors Ability to enable alarms on any sensor(s) Dedicated Alarm LED USB micro-B to PC or Mac connection (cable included) User replaceable CR2450 battery Over 4 year battery life while logging Bypass mode: Unit is powered from USB when connected to PC or Mac to conserve the battery Time is automatically synced to PC, Mac or Phone Pushbutton start, scheduled start, and real-time logging capabilities Battery backup: Continues to keep time when off Real Time Clock Accuracy: 0.50 sec/day (about 3 min/year) Dimensions: 2.1" x 1.3" x 0.6" (53 x 33 x 15mm) Also see: Portable Temperature and Humidity Datalogger Temperature Sensor: Range: -30°C to +80°C Resolution: 0.01°C Accuracy: ±0.3°C (+5°C to 60°C) Cal Accuracy: ±0.1°C (±20°C of Cal Temp)

Manufacturer: Orico Brand: Supco Model: SL500T Color: White

The SL500 series data loggers are simple to use, versatile test instruments which can be used in a multitude of applications.

Manufacturer: EISCO Brand: NEULOG Model: NUL206

NeuLog logger sensor measures static pH values in common liquids, such as water, milk, and vinegar, and can be used to monitor ecological systems, effect of pH on enzymes, and chemical reactions with changing pH, such as titrations, for further study. The logger sensor has a pH electrode probe with a glass bulb for taking readings, and includes an attached container for storing solutions. The logger sensor has an experiment duration of 1.0 second to 31.0 days, with 15.0-bit analog-to-digital converter (ADC) resolution for reading a range of values. The sensor is calibrated with a pH7 standard buffer solution (sold separately). The pH logger sensor can be used for chemistry, biology, biochemistry, environmental, earth science, and pharmacological experiments, and is suitable for grade 3 and higher, or ages 10 to 21. The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficiency, the logger sensor can store up to five experiments in flash memory, and saved experiments can be uploaded to a PC or Mac at any time. Additional accessories, such as USB, Wi-Fi, or batt...

Manufacturer: Cryopak Brand: Cryopak

Manufacturer: EISCO Brand: NEULOG Model: NUL229

NeuLog logger sensor measures soil moisture levels, and can be used to monitor habitats, ecosystem health, animal behavior, and soil chemistry for further study. The logger sensor has an attached probe with a ceramic cone tip for taking readings, and a cap that, when sealed, creates vacuum pressure inside the probe for calculating the soil moisture level. The logger sensor has an experiment duration of 1.0 second to 31.0 days, and 15-bit analog-to-digital converter (ADC) resolution for reading a range of values. The soil moisture logger sensor can be used for chemistry, biology, environmental, earth science, biochemistry, and physics experiments, and is suitable for grade 3 and higher, or ages 10 to 21. The logger sensor consists of a data logger, flash memory, and a sensor for fully self-contained data gathering, and is plug-and-play for immediate readings as soon as it is connected. The logger sensor sends data in digital format to a PC, Mac, tablet, smart phone, or other viewer device, and provides multiple connection options, including USB and wireless. The logger sensor’s browser-based software adjusts ranges and gains, and provides applications for presenting data, including online and offline modes, tables, graphs, data analysis, double-axis set up, statistic operations, and mathematical operations. The logger sensor is encased in durable plastic, and has an LED indicator to track experiment status, with push buttons for calibration and start/stop experiments in offline mode for ease of operation. To take an assortment of readings during a single experiment, the logger sensor can be attached to another sensor; one to 10 logger sensors can be used per experiment (sensors sold individually). For efficiency, the logger sensor can store up to five experiments in flash memory, and saved experiments can be uploaded to a PC or Mac at any time. Additional accessories, such as USB, Wi-Fi, or battery modules, are required for operation depending on the device (PC, tablet, viewer, and so on) used to receive re...