Data Loggers - Page 53

Manufacturer: Thermco Brand: THERMCO

Thermco Temperature & Humidity Data Logger, Digital Readout -30 to +70C & 0 to 99% Rh W/Audio & Visual Alarm

Manufacturer: Graphtec Brand: Graphtec Model: GL100-WL

Graphtec GL100-WL GL100 Main Unit, Standard Model, Required to Use with Sensor Units or Input Adapters.   It is modular type that is able to support variety measurement by exchanging the input module. Multiple sensors and the input terminal are available for corresponding to the application. Easy measurement by multifunction input Available the software for PC & Smart devices Possible to check the data in multiple method Reliable measurement with useful functions Typical applications Sales network Flexible input module allows wide range of measurements The GL100 series announces support for additional sensors in volatile wireless and non-wireless environments with ability to exchange input module.   Main body Input modules GL100-WL (with WLAN) GL100-N (without WLAN) Measuring the Temperature, Humidity, Acceleration, Carbon dioxide (CO2), Illuminance, UV, AC current, Voltage GL100 are using the Wireless LAN (WLAN) of the IEEEE802 standards. Area that can use it is limited by the Wireless Telegraphy Act in the region.   Easy measurement by multifunction input The input module can be expanded to accommodate a wide variety of measurements   Dual port adapter connects up to two modules for simultaneous interface GL100-WL / N Dual port adapter Temp./Humidity sensor Illuminance/UV sensor GL100-WL / N Dual port adapter Temp./Humidity sensor Carbon dioxide sensor GL100-WL / N Dual port adapter Illuminance/UV sensor Carbon dioxide sensor It is not able to connect two sensors of the same type. Providing a variety of sensors and input terminals corresponding to the application. There is the following input module

Manufacturer: Advantech Brand: Advantech

Datalogging & Acquisition 96-bit digital I/O PCI-bus C98Card (RoHS)

Manufacturer: Testo AG Brand: Testo Model: 0572 1764

Testo 176 data loggers offer easy data collection, dual mode readout, USB interface, and SD card. ideal for equipment commissioning and troubleshooting. Inexpensive to install in multiple locations so you can perform a complete analysis. Record measurement values, max/min, date, time. All data saved, regardless of battery condition. Long-term and multi-channel temperature and humidity measurement. Channels: 4 x external. Measuring range: -328 degree to 752 degree F (Type T) -310 degree to 1832 degree F (Type K) -148 degree to 1382 degree F (Type J). Battery life (at 77 degree F): 8 years at 15 minimum measurement rate. Operating temperature: -4 degree to 158 degree F (-20 degree to 70 degree C). Battery type: 1 x Lithium (TLH-5903). Measuring Cycle: 1 sec - 24 hr. Memory: 2 million readings. Measures 2-1/2" length by 1-19/64" width by 4" height.

Manufacturer: Smacq Brand: Smacq

USB-2000 series DAQ card is one of your best choice with high efficiency and low cost together, with full fucntion LabVIEW support USB-2000 series DAQ, you can build your test and measurement system very easy! USB Specification of USB-2610 ● 16bit vertical resolution ● Top 125KSa/s ● 8 channel analog input ● Multiscale input,±24V(DIFF),±20V(DIFF),±10V,±5V,±2.5,±1.25V,±0.5V ● 8 channel isolation DI, 8 channel segregation DO ● Visual Studio, LabVIEW support ● USB2.0 High Speed interface Packing list ● When you open the package of a new USB series data acquisition card, the package should contain the following items. ● 1*USB Series Data acquisition card ● 1*USB-A TO USB-B cable ● Connecting terminal (depending on model) ● Connecting terminal ● 1*Data CD(Driver,Demo,Software) ● 1*Warranty notice

Manufacturer: Orico Brand: Supco Model: SL500TC Color: White

The SL500 series data loggers are simple to use, versatile test instruments which can be used in a multitude of applications.

Manufacturer: NK Kestrel Brand: Kestrel Model: 0730BLU

A Kestrel DROP is the world's easiest-to-use rugged and waterproof environmental data logger. Available in three models - the Kestrel DROP D1 Temperature Logger, the Kestrel DROP D2 Temperature and Humidity Logger, and the Kestrel DROP D3 Temperature, Humidity and Pressure Logger - all three models allow you to monitor and record the conditions of any environment and easily access and chart real-time and historical data on your phone, tablet or other smart device. The Kestrel DROP D3 data logger can be placed wherever needed to log temperature, humidity, heat index, dew point temperature, station pressure, density altitude and pressure trend with the data logs retrieved wirelessly and automatically to the Kestrel Connect app when within wireless range (up to 100' or more line of sight). Each DROP measures just 1 x 1.8 x 2.4 inches (24 x 46 mm x 60 mm) and weighs just 1.2 ounces (34 grams). DROP loggers meet military and international standards for water, dust and shock resistance (IP-67 and MIL-STD-810G) and are conveniently equipped with a sturdy d-ring for hanging wherever needed.

Manufacturer: NK Kestrel Brand: Kestrel Model: 0730TAN Color: Tan

A Kestrel DROP is the world's easiest-to-use rugged and waterproof environmental data logger. Available in three models - the Kestrel DROP D1 Temperature Logger, the Kestrel DROP D2 Temperature and Humidity Logger, and the Kestrel DROP D3 Temperature, Humidity and Pressure Logger - all three models allow you to monitor and record the conditions of any environment and easily access and chart real-time and historical data on your phone, tablet or other smart device. The Kestrel DROP D3 data logger can be placed wherever needed to log temperature, humidity, heat index, dew point temperature, station pressure, density altitude and pressure trend with the data logs retrieved wirelessly and automatically to the Kestrel Connect app when within wireless range (up to 100' or more line of sight). Each DROP measures just 1 x 1.8 x 2.4 inches (24 x 46 mm x 60 mm) and weighs just 1.2 ounces (34 grams). DROP loggers meet military and international standards for water, dust and shock resistance (IP-67 and MIL-STD-810G) and are conveniently equipped with a sturdy d-ring for hanging wherever needed.

Manufacturer: NK Kestrel Brand: Kestrel Model: 0730RED Color: Red

A Kestrel DROP is the world's easiest-to-use rugged and waterproof environmental data logger. Available in three models - the Kestrel DROP D1 Temperature Logger, the Kestrel DROP D2 Temperature and Humidity Logger, and the Kestrel DROP D3 Temperature, Humidity and Pressure Logger - all three models allow you to monitor and record the conditions of any environment and easily access and chart real-time and historical data on your phone, tablet or other smart device. The Kestrel DROP D3 data logger can be placed wherever needed to log temperature, humidity, heat index, dew point temperature, station pressure, density altitude and pressure trend with the data logs retrieved wirelessly and automatically to the Kestrel Connect app when within wireless range (up to 100' or more line of sight). Each DROP measures just 1 x 1.8 x 2.4 inches (24 x 46 mm x 60 mm) and weighs just 1.2 ounces (34 grams). DROP loggers meet military and international standards for water, dust and shock resistance (IP-67 and MIL-STD-810G) and are conveniently equipped with a sturdy d-ring for hanging wherever needed.

Manufacturer: Extech Brand: Extech Model: DL150 Color: Multicolored

View larger True RMS AC Voltage/Current Datalogger Continuous datalogging up to 100,000 readings of TRMS AC Voltage (600 volts) or Current (200 amp) with a user programmable sample rate from 1 second to 24 hours. Additional Features LCD displays time/date, current reading, min/max, and if the user settable high/low alarms have been exceeded. Readings can be downloaded to your PC via the USB interface. Normal, peak, and capture (user specified trigger level) recording modes. Includes Comes with current clamp, test leads, alligator clips, software, USB cable, universal AC adapter, four AAA batteries, and user manual. More Extech Instruments to Choose From DL160View larger Dual Input True RMS AC Voltage/Current Datalogger Simultaneously datalog 2 channels of up to 256,000 readings of TRMS AC Voltage (600 volts) or Current (200 amp) or one AC Voltage and one AC Current input with a user programmable sample rate from 1 second to 24 hours. LCD displays time/date, current reading, and min/max, Readings can be downloaded to your PC via the USB interface. Normal, peak, and capture (user specified trigger level) recording modes. Complete with two current clamps, two sets of test leads, two sets of alligator clips, software, USB cable, universal AC adapter, and four AAA and two CR2032 batteries.