Flaw Detection Tools - Page 24

Manufacturer: IRISS Inc, Brand: IRISS

3" Calcium Fluoride IR Window with Locking Cover. Calcium Fluoride (CaF2) has long been used in research applications. It performs best in controlled environments where humidity, chemical exposure, vibration and high frequency noise are minimized or eliminated. The transmission rate characteristics of CaF2 are suitable for higher temperature applications, shortwave and midwave thermography and for the visual spectrum. Medium to longwave transmission rates (7-14 micron) are typically between 40-50% based on the infrared (IR) camera detector sensitivities at different wavelengths.

Manufacturer: IRISS Inc, Brand: IRISS

4" Polymer IR Window with Locking Cover. An evolutionary step in infrared (IR) windows, the Platinum Series VPT utilizes our exclusive Poly-View SystemTM technology to allow the use of any thermography camera to monitor energized electrical equipment. The world's only clear polymer IR window optic enables visual inspections, traditional IR inspections utilizing cameras across the entire IR spectrum and allows for UV inspections to be performed with a corona camera. The Platinum Series VPT IR windows are industrial-grade with a patented reinforced grill that exceeds high voltage switchgear viewing pane standards.

Manufacturer: Fluke Brand: Fluke Model: FLK-TI105 30HZ/FCA

Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meter choice includes the electrical properties to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings that correspond to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: LaMotte Brand: LaMotte Model: 0514

Brush for cleaning Lamotte Test Kit Test Tubes.

Manufacturer: IRISS Inc, Brand: IRISS

1/2" Polymer IR Window for Wide Angle Lens Cameras. The VP-12-IR's 12mm viewing area was designed for tight areas or for use with infrared (IR) cameras with smaller, wider angle lens systems. While the VP-12-IR is small in size, it is still big on features. The polymer lens material and switchgear-grade plastics assures compliance by maintaining an IP65/NEMA 4 seal whether open or closed. This keeps your energized electrical equipment in a closed and guarded condition, allowing your thermographers to work safely and efficiently. With the smaller footprint of the VP-12-IR, it could be the answer for providing a thermographer access to more challenging areas. This will allow monitoring of equipment that would not have been possible with a larger window. The durability, flexibility and proven transmission stability of IRISS polymer IR windows continues with the VP-12-IR.

Manufacturer: Ryan Brand: Ryan

Completely custom chart based on your business needs. Upon order placement, we will contact you so we can obtain your sketch or requirements. A proof will be shown to you for review before we produce your custom film tool. Size estimation charts are useful in a variety of circumstances for accurately measuring spots, inclusions, and defects on different textile surfaces, paper, plastic, etc. Other brand transparency charts may be imaged using a second generation copy from a master negative. Ours are first generatrion Master 8000 DPI charts for increased accuracy. Produced on high dimensionally stable lithographic film, .007 stable base polyester photographic film. A densitometer is used to calibrate the imaging equipment as well as a certified hglass scale and an Edmond scientific 60 power microscope to measure each image.

Manufacturer: Sensorex Brand: Sensorex Model: S465C

The Sensorex direct fit replacements for Acu-trol pH and ORP sensors feature more gel capacity and are constructed in superior PPS for better chemical compatability. The S465C for pH, S465C-ORP for ORP Platinum and S465C-ORP-Au for ORP Gold. The electrodes are designed for long service life in pool and aquatic installations at a very reasonable cost.

Manufacturer: AFL/Noyes Brand: AFL/Noyes Model: DFS1-01-0002MR

Noyes DFS 1 adapter tips are used with the Noyes DFS1 Digital FiberScope to inspect ferrule ends of jumper cables as well as fiber ends mounted inside bulkhead adapters on the front panels of transmission equipment and in patch panels. Noyes DFS 1 Tips are available in a variety of lengths. Angled DFS 1 tips are available to inspect angle-mounted connectors or connectors with limited access space. Commonly used DFS 1 FC SC and LC adapter tips are included in Noyes DFS1 Fiber Scope Kits. One kit targets connectors with PC or UPC polished end-faces while another kit is geared towards connectors with angle-polished (APC) end-faces. DFS 1 Adapter tips can be individually ordered to augment existing kits. DFS 1 Tips are available to inspect end-faces of connector ferrules as well as connectors mounted in bulkhead adapters.  Noyes DFS1 Adapter Caps PDF [1562 KB]

Manufacturer: YUSHI INSTRUMENTS Brand: YUSHI INSTRUMENTS Model: 2P12FG10

YUSHI INSTRUMENTS：We Are Manufacturer 20 years NDT experience,ISO, CE & RoHS certificated, this is how we keep superior quality and competitive offers for global valued customers Please be noticed that all transducers we made are fully customizable. If you need specific one, please leave a message to us

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: DOLLY20APK100

Positest at 20mm dollies are ideal for use with PosiTest at-at or PosiTest at-m models for measuring coating bond strengths up to 3, 500 psi (24 MPa), typically on metal substrates. Featuring spherical heads, PosiTest at dollies automatically self-level on uneven surfaces. Precision-machined DeFelsko dollies are manufactured to exacting tolerances, to ensure maximum repeatability, and compatibility with all PosiTest at models. Note: intended for use with DeFelsko AT-A or at-m models, sold separately.