Flaw Detection Tools - Page 9

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series WDPM Wireless Differential Pressure Module transmits measurements to the Model UHH handheld to view pressure drop across filters, static pressure in ducts, and velocity pressures from pitot tubes or air flow stations. When using it with a pitot tube or air flow measuring station, the measurement can be calculated to read directly in air velocity or volumetric air flow. The module mounts in the holder on the back of the handheld, or in an optional mounting bracket. Wireless modules can take measurements from at least 50 feet away from the base unit. An LED flashes on the top of the module to let the customer know when the module communicates with the handheld, as well as when the module's battery is low. The battery is rechargeable via the mini-USB connector on the top of the module.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Accessory For Dwyer® Series UHH2 & AQTIA

Manufacturer: Multiquip Brand: Multiquip Model: 35-366

Multiquip Ee55889 Kit emergency stop switch DA/dace Generator. Located in an accessible location. Important and necessary Safety feature for any Generator. Used for the da70000ssa2 and da70000ssa2gh models. Can shut the Generator off at any time. Easily used by anyone.

Manufacturer: Doran Scales, Inc. Brand: Doran Scales

Infant Head Measurement Tapes (inches/centimeter), 15/pk, 5 pk/cs

Manufacturer: Sensorex Brand: Sensorex Model: S420C/10/BTD

pH Sensor, CPVC, Yellow Cap, 1m,Boot BNC.

Manufacturer: Nasco Whirl-Pak Brand: Nasco Whirl-Pak Model: B01423WA

Nasco Whirl-Pak B01423WA Hydrated Speci-Sponge Bag with Sterile Glove.

Manufacturer: OMRON Brand: Omron

[Model]G9SX-BC202-RT [Rated voltage]24 VDC [Terminal block type]Screw terminals [Weight]Approx. 125 g Power input [Rated supply voltage]24 VDC [Operating voltage range]-15% to 10% of rated supply voltage [Rated power consumption *]3 W max. * Power consumption of loads not included. Inputs [Safety input][Feedback/reset input] Operating voltage: 20.4 VDC to 26.4 VDC,internal impedance: approx. 2.8 k Ohm * * Provide a current equal to or higher than that of the minimum applicable load of the connected input control device. Outputs [Instantaneous safety output OFF-delayed safety output *1] P channel MOS-FET output Load current: 0.8 A DC max./output *2 *3 [Auxiliary output] PNP transistor output Load current: 100 mA max./output *1. While safety outputs are in the ON state,the following signal sequenceis output continuously for diagnosis. When using the safety outputs as inputsignals to control devices(i.e. Programmable Controllers),consider theOFF pulse shown below. *2. The following derating is required when Units are mounted side-by-side. 0.4 A max. load current/output *3. A load current below 1 A DC/output can be used when the following outputs are used. 1 outpu

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: DOLLY10APK100 Color: Silver

PosiTest AT 10mm dollies are ideal for use with PosiTest AT-A or PosiTest AT-M models for measuring coating bond strengths up to 14,000 psi (96 MPa), typically on metal substrates. Featuring spherical heads, PosiTest AT dollies automatically self-level on uneven surfaces. Precision-machined DeFelsko dollies are manufactured to exacting tolerances, to ensure maximum repeatability, and compatibility with all PosiTest AT Models. Note: Intended for use with DeFelsko AT-A or AT-M models, sold separately.

Manufacturer: Bacharach, Inc. Brand: Bacharach Model: 0024-7059

Bacharach 0024-7059. Product Description: CALIBRATION KIT (LESS CALIBRATION GAS)

Manufacturer: Bacharach, Inc. Brand: Bacharach Model: 0024-8521

The Fyrite INSIGHT Plus is Bacharach’s next-generation residential and commercial combustion analyzer featuring enhanced features and intuitive operation. This lightweight, American-made hand-held analyzer uses advanced technology to accurately measure, analyze and report test results to validate safe operation, install more efficient systems and save customers’ money. With its easy to use Fyrite User Software and exclusive B-Smart CO sensor, the Fyrite INSIGHT Plus enables technicians and HVAC/R service representatives to upgrade software or install pre-calibrated sensors right in the field to avoid costly downtime and inconvenience. The Fyrite INSIGHT Plus is a five-in-one steady state combustion analyzer that includes a room air CO test instrument, a flue gas CO tester, dual channel digital thermometer (up to 999º F), and a digital manometer (which measures draft, gas pressure, ESP, and up to +/- 40 INWC). Capable of providing up to 100 combustion, pressure and temperature records, the Fyrite INSIGHT Plus also can display measurement results instantly for up to ten different fuels on its full-color backlit LCD display. In addition, specific information can also be downloaded to a PC or printed via an infrared printer.