BAYM® 5(32)A 120V 60HZ Single Phase Din Rail KWH Watt Hour Din-rail Energy Meter LCD KWH 32A

5(32)A 120V 60HZ Single phase Din rail KWH Watt hour din-rail energy meter LCD KWH 32A BM18SA

Function and Features:
35mm standard DIN rail installation, comply with standard DIN EN 50022
Single pole width (modulus 17.5mm) comply with standard DIN 43880
Standard configuration: 7+1 digits display (9999999.1kwh) by white black source LCD
May select 7+1 digits display (999999.1kwh) without backlight source general LCD
Standard configuration: pulse output passive (polarity). The pulse output passive can be no polarity
Contact with all kinds of AMR system convenient; comply with standard DIN 43864
Bicolor LED instructions power supply state is green and signal of energy impulse red.

Specification:
1.Meter type:BM18SA (LCD display)
2.Digit Display mode:7+1 digits
3.Nominal voltage(Un):120V AC
4.Insulation capabilities:AC voltage withstand
5.Impulse voltage withstand:2KV for 1 minute;6KV ¨C 1.2¦ÌS waveform
6.Basic current (Ib):5A
7.Maximum rated current (Imax):30A
8.Operational current range:0.25A-30A
9.Over current withstand:960A for 0.01s
10.Operational frequency range:60Hz +-10%
11.Internal power consumption:less than 2W / 10VA
12.Test output flash rate (RED LED):2000 impulses/kWh
13.Pulse output rate (pins 20 & 21):2000 pulses/kWh
14.Power supply indicator (Green LED):Meter is connected and working OK
15.Consumption indicator (RED LED):Flashing at load running
16.Data save:The data can be stored more than 20years