ETCR6800D Clamp Ammeter On AC/DC Clamp Current Meter Online Monitor Measurement Range: DC: 0.0A~2000A AC: 0.0A~1500A

Technical Specifications
Function: Measure AC/DC current, peak hold, online monitor
Size of clamp: Φ68mm
Range: DC:0.0A~2000A AC:0.0A~1500A
Accuracy: ±2%rdg±3dgt
Resolution: 0.1A
Data interface: USB
Power Supply: Zn-Mn dry battery 6F22 9V
Test Mode: Clip-on CT, noncontact mode
Display Mode: Four digits LCD display
LCD Dimension: 35mm×21.5mm; display domain: 32mm×15mm
Frequency: AC 45Hz~400Hz
Sampling Rate: 2 times/s
Polarity Indication: DC current auto identified and display"-"
Test Position: Tested wire in the jaw center; Error will increase to 1.5%rdg max if deviate the center
Range Shift: Automatically
Line Voltage: below 600V
Software: with the software the data can upload to computer
Data Memory: 99units, FULL blinks when the memory is full
Peak Hold: Push HOLD without release, the meter will show the peak value during the pushing period
Reading Hold: DH indicating the reading is hold
Out of Range: OL indicating the current is out of range
Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption
Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
Operating temperature and humidity: -10C~50C; Below 80%rh
Max error refer to environment: -10C~0C,40C~50C,Error will increase max to 1%rdg
Temperature and Humidity for storage: -10C~60C,below 70%rh
Insulating Strength: AC2kV/rms. (between the alloy of the clamp and the housing)
Applicable safety rules: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT III (600V)
Accessories: Meter: 1pc; USB communication line: 1pc; software: 1pc; bag: 1pc