ETCR6800 Clamp Leakage Current Meter Leakage Current Tester Range: 0.00mA~1200A Large Diameter Clamp Meter

Technical Specification
Function:Measurement of AC leakage current, AC current and on-line measurement
Power: Zn-Mn dry battery,6F22,9V
Size of clamp: Φ68mm
Range: 0.00mA~1200A
Resolution: 0.01mA
Accuracy(23°C±3°C, below 70%RH): 0.00mA~59.9A: ±1.5%±5dgt; 60.0A~199A: ±2%±5dgt; 200A~599A: ±3%±5dgt; 600A~1200A: ±4%±5dgt
Test Mode: Clip-on CT, integral mode
Display Mode: Four digits LCD display
Dimension: HxWxT:224mmX115mmX43mm
LCD Dimension: 35mm×21.5mm;display domain:32mm×15mm
Sampling Rate: about 2 times/s
Range Shift: Automatically
Voltage Range: AC600V
USB Interface: Data stored in the memory of the meter via USB upload to PC, or on-line monitoring
USB line:1.5m
Storage: 99units,all used when display FULL
Peak Hold: Push HOLD without release, the meter will show the peak value during the pushing period
Reading Hold: mDH indicating the reading is hold
Out of Range: OL indicating the current is out of range
Auto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumption
Battery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed
Consumption: About 15mW
Temperature and Humidity: Working: -10℃～40℃,below 80%rh; Storage: -10℃～60℃,below 70%rh
Insulating Strength: AC2kV/rms.(between the alloy of the clamp and the housing)
Applicable Safety Rules: IEC1010-1,IEC1010-2-032,pollution, etc 2,CAT 3(600V)
Accessories: Meter: 1pc;USB communication line:1 pc; disk: 1 pc; bag: 1pc