Pico TA189 30 A AC/DC Precision Current Probe, BNC Connector

30 A AC/DC Precision Current Probe, BNC Connector The TA189 30 A high-precision current probe is for applications requiring non-intrusive current measurement, using closed-loop Hall effect technology to measure both AC and DC current with high stability over long periods of time. Ideal for current leakage monitoring, battery discharge testing, or used in conjunction with an active differential voltage probe such as TA041 it can be used for power quality analysis. The 30 A precision current clamp allows you to measure from 5 mA up to 30 A without cutting, disconnecting or stripping the wire. It is ideal for measuring the currents in sensors and actuators across most modern passenger and commercial vehicles. The TA189 provides improved sensitivity, lower noise and faster response. Featuring a 25 mm jaw size this clamp is suitable for measuring battery drain over long periods. It also features an auto power-down facility to save battery life when not in use (this feature can be disabled for battery drain / shutdown current testing). Using advanced Hall Effect sensors for improved sensitivity and high external field rejection as well as closed loop control for increased accuracy, the TA189 delivers a breakthrough in range and accuracy to meet the challenges of modern vehicles. These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. To avoid electric shock: Use caution during installation and use of this product. High voltages and currents may be present in circuit under test. This product must be used only by qualified personnel practising applicable safety precautions. Do not use product if damaged. Always connect clamp to display device before it is installed around the conductor. Always ensure that the clamp is removed from any live electrical circuit, and that leads are disconnected before removing the battery cover