Oscilloscopes - Page 44

Manufacturer: ATTEN Brand: Atten Model: ADS1102CAL

The ATTEN ADS1102CAL is the most powerful portable digital oscilloscope at present. It is the perfect combo with top performance and powerful function, which represents the highest level in digital storage oscilloscopes. Application * Electronic circuit design and debugging * Examine the instantaneous signal * Circuit function test * Industrial Control Survey Specifications * Model Index: ADS1102CAL * Bandwidth: 100MHZ * Sampling Rate: * Single Channel: 1Ga/s; * Double Channels: 500Msa/s * Equivalent Sampling Rate: 50GSa/s * Memory Depth: * Single Channel: 40K; * Double Channels: 1M/CH * Rise Time:

Manufacturer: PICO TECHNOLOGY Brand: PICO TECHNOLOGY

PICO TECHNOLOGY PICOSCOPE 2105 OSCILLOSCOPE, 25MHZ, 1 CHANNEL, 100MSPS

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Moderately priced measuring accessories for measurements with earth spikes.

Manufacturer: Pico Brand: Pico Model: TA189

30 A AC/DC Precision Current Probe, BNC Connector The TA189 30 A high-precision current probe is for applications requiring non-intrusive current measurement, using closed-loop Hall effect technology to measure both AC and DC current with high stability over long periods of time. Ideal for current leakage monitoring, battery discharge testing, or used in conjunction with an active differential voltage probe such as TA041 it can be used for power quality analysis. The 30 A precision current clamp allows you to measure from 5 mA up to 30 A without cutting, disconnecting or stripping the wire. It is ideal for measuring the currents in sensors and actuators across most modern passenger and commercial vehicles. The TA189 provides improved sensitivity, lower noise and faster response. Featuring a 25 mm jaw size this clamp is suitable for measuring battery drain over long periods. It also features an auto power-down facility to save battery life when not in use (this feature can be disabled for battery drain / shutdown current testing). Using advanced Hall Effect sensors for improved sensitivity and high external field rejection as well as closed loop control for increased accuracy, the TA189 delivers a breakthrough in range and accuracy to meet the challenges of modern vehicles. These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. To avoid electric shock: Use caution during installation and use of this product. High voltages and currents may be present in circuit under test. This product must be used only by qualified personnel practising applicable safety precautions. Do not use product if damaged. Always connect clamp to display device before it is installed around the conductor. Always ensure that the clamp is removed from any live electrical circuit, and that leads are disconnected before removing the battery cover

Manufacturer: Hioki Brand: Hioki

Pincher Probe for LCR Meter IM3523, cable length 73 cm (2.40 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, tip electrode spacing: 0.3 (0.01 in) to 6 mm (0.24 in).

Manufacturer: Rigol Brand: Rigol Model: NFP-3

.da-1-4 { width: 23%; } .da-img { max-width: 100%; height: auto; margin: auto; } .da-ilf-gsep{ background-color: #ffdc00; align:center;} .da-ProdBody{ padding: 2%; margin: 0 auto; } .cr-list { list-style-image: url(/assets/1/7/850c3d3a3b4b40e68a2a2327508d61531.png); } .da-sm-img{ box-shadow: 1px 2px 3px #eeeeee; border-radius: 5px; } .da-sm-img:hover{ box-shadow: 1px 1px 2px 1px #aaa; transition: all 0.5s ease-in-out; } .da-overlay { position: fixed; top: 0; bottom: 0; left: 0; right: 0; background: rgba(0, 0, 0, 0.7); transition: opacity 50ms; visibility: hidden; opacity: 0; z-index: 1000; } .da-overlay:target { visibility: visible; opacity: 1; } .da-popup-img { margin: 70px auto; padding: 20px; background: #fff; border-radius: 5px; width: 50%; position: relative; transition: all 0.5s ease-in-out; max-width: 800px; } .da-popup-img h2 { margin-top: 0; color: #333; font-size:14px; } .da-popup-img .da-close { position: absolute; top: 0px; right: 10px; transition: none; font-size: 30px; font-weight: bold; text-decoration: none; color: #333; } .da-popup-img .da-close:hover { color: #888888; } .da-popup-img .da-content { max-height: 30%; overflow: auto; }

Manufacturer: Hioki Brand: Hioki

Hioki CT7636 AC/DC Current Sensors (600A DC-10kHz) Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CT7636 is a 600 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis. AC/DC Auto-Zero Current Sensor Frequency band: DC to 5 kHz Perform measurement without shifts in the zero-point, even during extended waveform recording or in locations where the temperature varies during measurement. AC/DC Current Sensor Frequency band: DC to 10 kHz Use to observe instantaneous waveforms and make short- term measurement in locations without temperature variations.   AC/DC Auto-Zero Current Sensors Take measurements without shifts in the zero-point, even during extended recording with temperature variations Normal Sensor × New Auto-Zero Sensor × Offset Current × Because measured values acquired using standard sensors exhibit shifts in the zero-point caused by temperature variations, their use in recording data over extended periods of time has required regular zero-adjustment. This issue is caused by the effects of the Hall elements used in the sensor's detection circuitry. Hioki's new auto-zero sensors feature a new, switching-based offset cancellation circuit that was developed to address this issue. This circuit minimizes shifts in the zero-point to enable extended recording without constant zero-adjustment.

Manufacturer: Hioki Brand: Hioki

AC/DC Current Sensor CT7000 Series AC/DC Current Sensors (2000A DC- 10kHz) × AC/DC Current Sensors (2000A DC- 10kHz) Ideal for site inspections by using detachable Display Unit   Accurately measure and record even when the temperature changes Four output formats to output data to loggers or other devices (via Display Unit) WAVE, RMS, PEAK, Hz   Hioki CT7642 AC/DC Current Sensors (2000A DC- 10kHz)   AC/DC Current Sensors 2000 A AC/DC Detachable Current Sensor System for observing instantaneous waveforms. Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CT7642 is a 2000 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis.   AC/DC auto-zero current sensors × Because measured values acquired using standard sensors exhibit shifts in the zero-point caused by temperature variations, their use in recording data over extended periods of time has required regular zero-adjustment. This issue is caused by the effects of the Hall elements used in the sensor's detection circuitry. Hioki's new auto-zero sensors feature a new, switching-based offset cancellation circuit that was developed to address this issue. This circuit minimizes shifts in the zero-point to enable extended recording without constant zero-adjustment. Parts Names   Parts Names ×

Manufacturer: Hantek Brand: Hantek

Hantek DSO1060 Handheld Digital Oscilloscope Features Large 5.7" TFT color LCD display with backlight. USB Host/Device 2.0 full-speed interface with removable disk support. RS-232/LAN optional. Easy to control with PC or at long-distance. Bandwidth: 60 MHz. Functions of high precision digital multimeter (6000 counts). AC/DC voltage AC/DC current Resistance Capacitance Continuity Diode test High refresh rate. High real-time sample rate 150MSa/s, 50GSa/s equivalent-time sample rate. Math: FFT , + , - , * , / ,X-Y. Pass/Fail function. 22 automatic measurements. Multiform trigger mode, 2 separate time base in ALT trigger mode. Easy to see 2 signal with different frequencies. 1000 waveform records. Installed battery: 6 hours work time. Saving waveforms in .jpg/.bmp format, MS excel/word files. Labview\VB\VC second design instance. Software compatible with: Windows NT, Windows 2000, Windows XP ,VISTA

Manufacturer: Keysight Brand: Keysight Model: DSO1052B

Keysight’s 1000B Series oscilloscopes deliver the performance and features you expect in a big scope – and the portability and low price you require in a small one. We’ve enhanced the economy scope by giving you powerful signal capture and display, advanced measurement capabilities and accelerated productivity.