Oscilloscopes - Page 45

Manufacturer: Rigol Brand: Rigol Model: DP811

Single Output, Dual Range 200 W Power Supply     SCPI Status Registers All the SCPI instruments execute the status register operations in the same way. The status system records the various instrument states into three register sets: status byte register, standard event register and questionable status register sets. The status byte register records the advanced summary information reported by other register sets. The SCPI status systems of the DP800 series multi-channel models. SCPI Command Overview SCPI (Standard Commands for Programmable Instruments) is a standardized instrument programming language that is built upon the standard IEEE488.1 and IEEE 488.2 and conforms to various standards (such as the floating point operation rules in IEEE754 standard, ISO646 7-bit coded character for information interchange (equivalent to ASCII programming)). This section introduces the syntax, symbols, parameters and abbreviation rules of the SCPI commands. Build Remote Communication You can build the remote communication between DP800 and PC over USB, LAN, RS232 or GPIB (option, can be extended via the USB-GPIB interface converter) interface. Remote Controls Methods User-defined Programming You can program and control the instrument using the SCPI (Standard Commands for Programmable Instruments) Send SCPI Commands via the PC Software You can control the power supply remotely by sending SCPI commands via the PC software (Ultra Sigma) provided by RIGOL.. OVERVIEW   The DP800 Series Power Supplies combine the ability to source, analyze, and coordinate over time in a powerful new package. The DP800 Series is a family of linear power supplies systems with 3 outputs and up to 195 Watts in total. With one channel isolated users can reconfigure instruments into any number of systems or applications

Manufacturer: Hantek Brand: Hantek HDG2032B

We need about 4 business days to prepare it for you and will send it to you by FedEx, UPS or DHL service. Specifications: Main Features *Model:HDG2032B *Channel:2 *Waveform Length:64M *Bandwidth:30MHz *Frequency:1μHz-30MHz *Sample Rate:250MSa/s *Voltage Resolution:16Bit *Digital Output Mode:16 Channels Frequency Characteristics *Waveform:Sine,Square,Ramp,Pulse,Noise,Sinc,Exponential Fall,ECG,Gauss,Haver Sine, Lorentz,Dual-Tone,DC *Sine:1μHz-30MHz *Square: 1μHz-25MHz *Pulse: 1μHz-20MHz *Ramp: 1μHz-2MHz *White Noise:30Mhz *Harmonic/Arbitray: 1μHz-20MHz *Resolution: 1μHz *Accuracy:±2ppm,18℃-28℃ Square *Rise/Fall time(Typical):＜14ns *Overshoot:Typical Value(100KHz,1Vpp)＜3% *Duty Cycel:≤10MHz:20.0%-80.0%;10MHz-40MHz:40.0%-60.0%;＞40MH:50.0%(fixed) *Non-symmetry:1% of period+5ns Ramp *Linearity:≤1%(Typical,1kHz,1VPP,Symmetry 100%) *Symmetry:0%-100% Pulse *Period:200ns-1millons *Pulse:≥16ns *Leading/Trailing Edge Time: ≥10ns *Overshoot:Typical (1Vpp)＜3% Amplitude Characteristic *Amplitude Range:≤20MHz:1mVpp-20Vpp; ≤60MHz:1mVpp-15Vpp; ≤80MHz:1mVpp-10Vpp ;≤90MHz:1mVpp-5Vpp; ≤10MHz:1mVpp-2Vpp *Resolution:1mv or 4 digits *Isolation:＜-80dB *Impedance:50Ω(Typical) 7.Modulation Characteristic:Support AM,FM,PM,ASK,FSK,PSK and PWM modulations 8.Burst Characteristic *Burst Count:200000000 *Gated Source:External Trigger *Trigger Source:Internal External or Manual 9.Sweep Characteristic *Direction:Up *Type:Linear *Sweep/Hold/Return Time:280000s

Manufacturer: Instek Brand: GW Instek

Analog Oscilloscope - 35MHz The GOS-635G and GOS-622G are general purpose analog oscilloscopes with 35MHz and 20MHz bandwidth, respectively. These products are designed for a wide range of applications ranging from product designs or assembly lines to EE laboratories or class experiments. Featuring a low vertical sensitivity at 1mV/div and versatile triggering, the GOS-635G and GOS-622G can reliably capture small signals. The GOS-635G/622G is the highest performance/price solution in the Test & Measurement market.

Manufacturer: SainSmart Brand: SainSmart

This is SainSmart DSO138 2.4" TFT 1Msps Digital oscilloscope kit for DIY. It's easy to solder. Perfect for students to identify elements, inline elements welding, soldering SMD components training. And you could also easily develop a secondary development kit based on SainSmart DSO138. For example, it can be changed to voltmeter, data loggers, and so on. Specifications: * Max real-time sampling rate: 1Msps * Accuracy: 12Bit * Sampling buffer depth: 1024 bytes * Analog bandwidth: 0 - 200KHz * Vertical sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner) * Input impedance: 1MΩ * Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe) * Coupling modes include DC / AC / GND * Horizontal time base range: 10μs / Div - 50s / Div (1-2-5 progressive manner) * With automatic, conventional and single-shot mode, easy waveform capture the moment * Available rising or falling edge trigger * Adjustable trigger level position * Observable trigger waveform before (negative delay) * Can always freeze the waveform display (HOLD function) * 1Hz /3.3V square wave test signal source Note: 9V DC power supply required. Not included. Manual： Comes with complete detailed descriptive instructions including schematics, production guidance, troubleshooting methods, etc., making a high success rate. Please download here: https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-010-214/20-010-214DSO-EN%2Bupdata.zip

Manufacturer: Velleman Brand: Velleman Model: EDU06

Learn how to get the most out of your digital oscilloscope. The board generates a number of safe 'real-world' signals, which we will use to perform measurements. Get familiarized with AC, DC and frequency measurements, sine and square waves, power supply ripple, full and half wave rectifiers, oscillators etc...Learn what terms such as V/div, Time/div, trigger level, auto-setup etc... mean. All experiments featured in this project are performed with the Velleman HPS140 Handheld Pocket Scope. Most experiments can be done with any digital storage scope. Some experiments can be performed with an analog scope.

Manufacturer: Hantek Brand: Hantek

AC/DC frequency range: Up to 20 kHz Effective Measurement Range: 20mA to 65A DC It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you are able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data. Application: Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipments measurement. Specification: DCA range 1 mV /10mA +/-(1.5%+/-5mA) 10mA ~ 20A 1mV/100mA +/-(2%+/-20mA) 100mA ~ 40A +/-(4%+/-0.3A) 40A ~ 65A ACA range 1mV/10mA +/-(2%+/-30mA) 100mA ~ 10A (40Hz ~ 2KHz) +/-(4%+/-30mA) 100mA ~ 10A (2KHz ~ 10KHz) +/-(6%+/-30mA) 100mA ~ 10A (10KHz ~ 20KHz) +/-(8%+/-30mA) 10A ~ 15A (40Hz ~ 20KHz) 1mV/100mA +/-(2%+/-30mA) 200mA ~ 40A (40Hz ~ 1KHz) +/-(4%+/-30mA) 200mA ~ 40A (1KHz ~ 2KHz) +/-(6%+/-30mA) 200mA ~ 40A (3KHz ~ 5KHz) +/-(8%+/-0.3A) 40A ~ 65A (40Hz ~ 20KHz) Captured Conductor Size 　 9mm maximum Low Battery Indictor 　 red LED lighting Operating Temperature 　 0Cto 50C 70% R.H. Storage Temperature 　 -20C to +70C, 80% R.H. Battery Type 　 9V DC, NEDA 1604, 6F22,0006P Battery Life 　 100 hours typical with alkaline Weight 　 250 gm typical Dimensions 　 195mm(H) x 70mm(W) x 33mm(D) Output 　 Supplied with coil cable with straight banana plug or BNC plug 　 Package includes: 1 x Hantek CC-650 AC/DC Current Clamp Digital Multimeter with BNC Connector

Manufacturer: Hantek Brand: Soodoo Model: PSO2020

- 1 channel - Bandwidth: 20MHz - Realtime sampling rate: 96MSa/s - Sampling Mode: Sample, Peak Detect, Average - Vertical resolution: 8 bits/channel - Vertical Sensitivity: 20mV~20V/div - Vertical Range: 8 divisions - Offset level: -/-4 divisions - Coupling Mode: AC/DC/GND - Offset increments: 0.02 div - Input Impedance:1M ohm - DC accuracy:+/-3% - Max Measured Voltage:50V (DC + AC peak) - Max. Input Voltage: 60V(DC + AC peak < 10kHz) - Display mode: Y-T - Timebase range: 1ns/div～5000s/div - Buffer Size: MAX.1M samples - Trigger Type: Edge trigger: Rising edge, Falling edge - Trigger Mode: Auto, Normal and Single - Trigger Range: 8 divisions - Trigger level: +/-4 divisions - Trigger Settability : 0.02 div increments - Auto Measurements: Vp-p, Vmax, Vmin, Vmean, Vrms, Vamp, Vtop, Vbase, Vmid,positive overshoot, negative overshoot, cycle mean, cycle RMS, period, frequency, positive pulse width, negative pulse width, rise time (10%~90%), fall time (10%~90%), positive duty cycle, negative duty cycle - FFT:Rectangular, Hanning, Hamming, Blackman Window - Interpolation: Linear, Sin(x)/x, Step - Button Operation: Start/Stop, Auto, Volt/div, Offset, Time/div, Position, Spotlight - Operating temperature: 0 to +40 °C - Operating humidity: 15 - 80 % RH - Storage temperature: -20 to 60 °C - Storage humidity: 15 - 85 %RH - Dimensions: approx. 230(L)x43(W)x 27(H)mm - Weight: approx.150g - Operating systems: Windows XP, Vista, 7, 8, 8.1

Manufacturer: Hantek Brand: Hantek Model: 01HAN1008C

Features: Cost-effective 8 channels oscilloscope for vehicle testing;2.4MSa/s, 12bits;DAQ card function;8 channels programmable generator which can analog signals of crankshaft, camshaft etc.1) Vehicle Testing l First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition l Ignition: primary and secondary l Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position l Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus l Performer: Petrol/Diesel l Starter and charging circuits2) Oscilloscope l 8 channels oscilloscope, 2.4MSa/s real time sampling rate l 12 bits vertical resolution, spectrum analysis function3) Programmable Generator l 8 channels programmable generator l Can analog signals of crankshaft, camshaft etc.4) Others l USB 2.0 interface plug and play, and no need extra power supply; l More than 20 types of automatic testing function, a similar interface with bench top oscilloscope, easy to use; l Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7;.

Manufacturer: Hantek Brand: Hantek Model: 6022BL

General Description: 20MHz Bandwidth; 48MSa/s Sample Rate; 16 Channels Logic Analyzer; Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has good heat resistance and strong wearability. Standard USBXI (TM) interface, easyly inserts into USBXI (TM) housing to make up a combination instrument. Detailed Description: Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has good heat resistance and strong wearability. Standard USBXITM interface, easily inserts into USBXITM housing to make up a combination instrument. USB2.0 interface, no external power source required, easy to use. Be suitable for notebook computer, product line maintenance, be used easily on business. Dimensions (mm):205(L) x120(W) x35(H), be carried easily. High performance, 48MS/s real-time sampling, 20MHz bandwidth. 16Channels Logic Analyzer, 10MHz Bandwidth; Operating System: Windows8, Windows 7, Windows NT, Windows 2000, Windows XP, VISTA. 23 measurement functions, PASS/FAIL Check, be suitable for technical application. Waveform average, persistence, intensity, invert, addition, subtraction, multiplication, division, X-Y plot. Save waveform in the following: text file, jpg/bmp graphic file, MS excel/word file. FFT One computer can connect many DSO, extend channel easily. PID/VID Second Design instance.

Manufacturer: Seeedstudio Brand: Seeedstudio

DSO Quad is a pocket size 4 channel digital oscilloscope for common electronic engineering tasks. It's based on ARM cortex M3 (STM32F103VCT6) 32 bits platform, providing 72MS/s sampling rate with integrated FPGA and high speed ADC. Internal 2MB USB disk could be used to store waveform, user application and upgrade firmware.