Oscilloscopes - Page 46

Manufacturer: JinHan Brand: Jinhan

The JinHan JDS2012A is a handheld electrical test device that combines a 20 MHz bandwidth(single-channel) oscilloscope and multimeter. Oscilloscope Function: 1.Input coupling: AC/DC 2.Input Impedence:1Mohm 25pF 3.Maxium input voltage:40V(probe x1)400V (probe X10) 2000V (Optional probe X100) . 4.Memory depth:2K 5.Vertical Sensitivity:10mV-5V (Probe 1X) 100mV-50V (probe 10X) (1,2.5,5 step); 6.Vertical accuracy:+/-3% 7.Vertical resolution:8bit 8.Bandwidth:20MHz 9.Real-time sampling rate :200MSa/s 10.Horizontal scan range:10nS/div-5S/div 11.Trigger mode:Auto, Normal and Single 12.Cursor measurements:Support time and voltage cursors 13.Screen:3.2-inch, 16-bit true color, TFT, 320 * 240 14.Battery:one piece of 18650 lithium battery,no in the package. 15.Size:202 * 100 * 35 (mm) Multimeter Function 1.DC Voltage:400mv/4.000v/40.00v/400.0v/4000v 2.AC voltage:400mv/4.000v/40.00v/400.0v/4000v 3.Resistance:400.0Ω/4.000KΩ/40.00kΩ/400.0kΩ/4.000mΩ/40.00mΩ 4.Capacitance:51.20nF/512.0nF/5.120UuF/51.20uF/100uF(30Sec) 5.Diodes:0v-1.5v 6.Continuity:

Manufacturer: Hantek electronic limited Brand: Hantek Model: DSO-2090

This Compact, Low Cost Product Offers You the Features only Found in High End, Very Expensive Standalone Digital Storage Oscilloscope. It combines the features of a traditional standard Digital Storage Oscilloscope in one compact unit at fraction of the cost.

Manufacturer: Hioki Brand: Hioki

Hioki AC/DC CLAMP METER CM4370 series Hioki CM4374 AC/DC Clamp Meter 2000A w/ Bluetooth ×   Hioki CM4374 AC/DC Clamp Meter 2000A w/ Bluetooth   True RMS 2000 A AC/DC Clamp Meter with Bluetooth Wireless Technology for Advanced Applications and the Toughest Situations   Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CM4374 is a 2000A True RMS clamp meter that features stronger jaws, broader -25? to 65? operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V is ideal for the clamp maintenance inspections of electrical and solar power equipment. Measured values can be sent to a smartphone or tablet using Bluetooth® wireless technology and displayed as waveforms in real time.   This instrument is a clamp meter that can perform true RMS measurement of current simply by clamping it around a circuit. In addition to current, it provides voltage measurement, frequency measurement, rush current measurement, resistance measurement, diode measurement, capacitance measurement, temperature measurement, voltage detection, and DC power measurement. The CM4372 and CM4374 also provide Bluetooth communications functionality, allowing measurement data to be monitored and logged from a smartphone or tablet.   Rugged clamp meters for the toughest situations     The CM4370 Series surpassed the requirements of numerous durability tests to deliver safety, confidence and peace of mind

Manufacturer: Velleman, Inc Brand: Velleman Model: APS230

Adjustable trigger level and slope. Peak measurements: Max, min. And PK to PK. Measurements: rms, db(rel), dbv, dbm and dbg. Direct audio power measurements. x1 and x10 probe Calculation option. Several display modes. Stereoscope mode for audio measurement. X and Y position shift. Battery Pack included, fast charge possible.

Manufacturer: Owon Brand: OWON

The Owon SDS7102E is a 2+1 Channel Digital Storage Oscilloscope with 100 MHz bandwidth, 1 GS/s sample rate, and 8 inches (800x600) color TFT-LCD screen all in an ultra-thin body. Includes AutoScale function to simplify the operation. The Owon SDS7102E includes 2 probes, USB cable, software CD, probe adjust pen, power adapter and user manual.

Manufacturer: Hantek Brand: Hantek DSO4102C

General Introduction for DSO4000C series: 2 Channel Digital Oscilloscope.1 Channel Arbitrary/Function Waveform Generator. The Keys for osilloscope and waveform generator is seperated for convenient to operate it simultaneously. Oscilloscope:70MHz Bandwidth, 1GSa/s Sample Rate.25MHz Arbitrary waveform generator, 12 bits resolution,200MHz DDS,7 inch 64K color LCD display, Resolution 800x480. Parameters: *Model:DSO4072C 1.Oscilloscope *Sample Rate:Sampling Rate Range:1GSa/s;Equivalent Sample Rate:25GSa/s 2.Acquisition Modes *Normal:Normal data only *Peak Detect:High-frequency and randon glith capture *Average:Wavefom Average, selectable 4,8,16,32,64,128 3.Horizontal *Sample Rate Range:1GS/s *Waveform Interpolation:(sin x)/x *Record Length:40K *SEC/DIV Range:4ns/div to 40s/div 4. Vertical *Vertical Resolution:8-bit resolution,all channel sampled simultaneously *Bandwidth:70MHz *Rise Time at BNC(typical):5ns 5.Trigger System *Trigger Types:Edge,Video,Pulse,Slope,Over time, Alternative *Trigger Source:CH1,CH2,EXT,EXT/5,AC Line *Trigger Modes:Auto, Normal, Single 6.Signal Source Mode *Waveform Impedance:DC-25MHz *Sample Rate:200MHzDDS *Output Waveform:Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC *Frequency Resolution:0.1% *Waveform Depth:4KSa *Frequency Stability:＜30ppm

Manufacturer: Owon Technology Co., Ltd Brand: OWON

The Owon VDS3104 4+1 Channel Virtual Oscilloscope is an oscilloscope that can connect directly with PCs through a USB connection. Accommodates users with 100 MHz of bandwidth, 1 GSa/s real-time sample rate, and multiple trigger modes - edge, video, slope, pulse, and alternate. Its USB powering facilitates mobile tests under powerless conditions. The VDS3104 comes included with a power cord, software disc, 2 probes and an adjustment tool, usb cable, power adapter, silicon gel case, and a users manual. Multi-trigger option: edge, video, slope, pulse, and alternate USB isolation - less signal inference, more PC protection USB bus powering Ultra-thin body design, easy portability

Manufacturer: Hioki Brand: Hioki

Sensor Extension Cable for CM7290 10m.

Manufacturer: Hioki Brand: Hioki

Hioki CT7631 AC/DC Current Sensors (100A DC-10kHz) Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CT7631 is a 100 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis. AC/DC Auto-Zero Current Sensor Frequency band: DC to 5 kHz Perform measurement without shifts in the zero-point, even during extended waveform recording or in locations where the temperature varies during measurement. AC/DC Current Sensor Frequency band: DC to 10 kHz Use to observe instantaneous waveforms and make short- term measurement in locations without temperature variations.   AC/DC Auto-Zero Current Sensors Take measurements without shifts in the zero-point, even during extended recording with temperature variations Normal Sensor × New Auto-Zero Sensor × Offset Current × Because measured values acquired using standard sensors exhibit shifts in the zero-point caused by temperature variations, their use in recording data over extended periods of time has required regular zero-adjustment. This issue is caused by the effects of the Hall elements used in the sensor's detection circuitry. Hioki's new auto-zero sensors feature a new, switching-based offset cancellation circuit that was developed to address this issue. This circuit minimizes shifts in the zero-point to enable extended recording without constant zero-adjustment.

Manufacturer: Hioki Brand: Hioki

Hioki CT9691-90 100A AC/DC Clamp Sensor with Power Supply Hioki AC/DC clamp sensors are best-in-class current sensors for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT9691 and CT9691-90 with sensor unit attachment is a DC to 10kHz/100A sensor, ideal for capturing current signals from solar power generation systems, UPS and batteries. Note: To use the CT9691/ CT9692/ CT9693 sensor with the Hioki PW3198 Power Quality Analyzer or the Hioki Memory HiCorder series, it must be connected and powered via the Sensor Unit CT6590. Note: The CT9691/ CT9692/ CT9693 sensor may also be used with the Clamp on AC/DC HiTester 3290/ 3290-10 (without the Sensor Unit CT6590). Parts Name