4.5 out of 5 stars with 45 reviews
Hannahool Digital PH Meter + TDS Tester Monitor for Aquarium, Fishing, Industry, Swimming Pools, Laboratory, Food & Beverage 0-9999 PPM (Red PH +Grey TDS)
List Price
$24.26
Our Price
$24.26
Savings
0% OFF
* Pricing Information Updated Less Then A Minute Ago
Description: This digital pen style PH meter is an ideal instrument for any aquarium, the fishing industry, swimming pools, school laboratories, food & beverage, etc. And, this Digital TDS Water Quality Tester is ideal for all basic water testing applications. This product is highly efficient and accurate due to its advanced microprocessor technology. Hold Function: stores measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Ranges is between 0-9990 ppm, and from 0-999 ppm, the resolution is in increments of 1ppm; from 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Applied range: the production and drinking of purified water, Electroplating liquid, Boiler water, Water in fish tank, Water of swimming pools, Photograph flushing fluid, Well water, Deep phreatic water, Laboratory, Aquaculture, Food processing, etc. |
-
Brand Name: Digital PH Meter + TDS Tester,Features: This digital pen style pH meter is an ideal instrument for whatever you may need to test the pH levels. Shuts off automatically after 10 minutes of non-use。
-
Excellent PH meter, very accurate and durable。 Measuring pH Range: 0.0 - 14.0 PH. Resolution: 0.1 PH。 Accuracy: ±in 0.1 pH 。 Typical EMC DEV: ± 0.2 PH。 Batteries: 3 x 1.5V (AG-13 Button Battery)。 Trimming: By Potentiometer。 Meter comes with calibration screwdriver。 Measures total dissolved solids (TDS) and temperature。 Measurement Range: 0-9990 ppm。 Accuracy: 2% 。 Digital Calibration (push button): Factory Calibrated。
-
Automatic temperature compensation function: it can automatically change the displayed value into the value of 25 Degrees。 High accuracy: Use the Titanium alloy probe which can avoid magnetic disturbance to test water and only has the error (± 0.1)。 LCD display screen: Big LCD display screen which has great waterproof performance and let you easily read the displayed value。 Fast measuring: can measure once in five seconds。
-
Specification: Size: 14.2 x 2.7x 1.5 cm (pH Tester)。 Size: 14.5 x 2.6 x 2.0 cm (TDS) 。 Package weight: 6.90z/197g。 Accuracy: ± 0.1PH 。 Battery: 4 x 1.5V (AG - 13 button battery。 The using life of battery: 700 hour。 Power source: 2 x 1.5 V (button cell)。 Zero: Adjust by the compensate potentiometer。
-
Operating steps: Take down the protective jacket of PH meter 。 Use distilled water to clean up the electrode of PH meter, and then use filter paper to soaks up the water of electrode。 Switch on the switch which on the battery compartment。 Insert the PH meter into solution until the liquid submerge the "immersion line"。 Slightly stir resolution for about two minutes and you can read the displayed value After use, clean up the electrode, turn off switch and put on the protective jacket of PH meter 。 The introduction of TDS-3 Tester: It is used for water test。 Take down the protective jacket。 Insert the TDS-3 Tester into solution until that the liquid submerges the "immersion line" Slightly stir the liquid to eliminate the bubble in the TDS-3 Tester。 Wait for 10 seconds until the displayed value is stable, and then press the HOLD button and take out the Tester to read the displayed value 。 After use, spin-dry the liquid in the tester and put on the protective jacket。 Test the Temperature。 You can use the temperature test function in the liquid or air at any time when you open the tester。 Press the EEMP button, the display screen will change into Temperature Display Continuously press the TEMP button, the tester will change into TDS mode。 Note: You had better not submerge the TDS-3 tester into water; the TDS-3 tester should be protected from direct sunlight, heavy load and fall. And it can test the 80 Degrees hot-water 。
Product Information Specifications for Hannahool Digital PH Meter + TDS Tester Monitor for Aquarium, Fishing, Industry, Swimming Pools, Laboratory, Food & Beverage 0-9999 PPM (Red PH +Grey TDS) Below:
| Manufacturer | Hannahool |
| Color | red,grey |
Join Our Community!
Like what you see? Get a FREE account and start posting, sharing, and discovering more!
Have Questions? Contact Us!
Find out the answers to your questions by contacting us. We look forward to hearing from you!